Having problems with your Projection Televisions ?

When i hit the device button on remote nothing comes up on the screen the green light on front of tv starts blinking and the tv shuts off shortly there after . i tried the reset button on front of tv doesnt help

Answers :

This is known as the bliking green light of death problem. Its common and fairly simple to fix. You can get the parts and instructons from sites such as www.TvRepairKits.com

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

When i hit the device button on remote nothing comes up on the screen the green light on front of tv starts blinking and the tv shuts off shortly there after . i tried the reset button on front of tv doesnt help

This is known as the bliking green light of death problem. Its common and fairly simple to fix. You can get the parts and instructons from sites such as www.TvRepairKits.com ... Mitsubishi WS-65809 65" Rear Projection Television

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the

If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help

Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

Hello my 32' alba tv (LCD32880H DF) wont turn on. Instead of the standby light being lit as normal it is flashing, alternating between red and blue. Tried turning off and back on at wall but no change, TV doesnt come off standby using the remote or the buttons on the front of the TV, please help.

Hw can i fix my alba 32880 hdf tv main ac ... Flat Panel Televisions

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit

Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

Mitsubishi CS-31205 TV Never had a remote for this great TV, but, accidentally pushed a button on my Comcast Cable remote and the TV is now in "Mute" mode. Not the Comcast box 'Mute' . Have tried pushing the "Reset AV" button on the front to no avail: Does TV have to be 'Off', 'On', or unplugged? Can I access this feature, to turn it off, without a Mitsubishi remote? Is there some combination of front buttons to undo this?

You are supposed to be able to switch the Comcast Remote to TV mode and switch Mute on that remote to change back to standard volume. If that doesn't work try volume up on the TV. Otherwise if neither of those work then check Remotes.com for a repla ... Standard (CRT) Televisions

My Thomson DTI 6021-25 DVR is constantly displaying the following error message when I try to access my library or even turn off the box: "Your hard disk drive is not yet ready. It will be available shortly." I've tried turning it off at the mains overnight, resetting it by switching off at the mains and pressing power for 10 secs when turning back on, and resetting it by switching off at the mains and pressing menu for 10 secs when turning back on. Nothing has worked. In the help setti

... Flat Panel Televisions

My sony KP-51WS500 needs reset. I hit a button on the remote and my picture went off. I started pushing buttons like an idiot trying to get the stations back and in the process it messed my picture up. I have tried everything. I can't get it ti set back to factory settings. Can someone please help?

It is possible that you messed up the convergance of the projector lamps on this TV. Try the convergance setup to see if this helps. ... Sony KP-51WS500 51" Rear Projection Television

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t

If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

I just purchased my Mitsubishi WD52628 projection television used as it only needed the bulb replaced. I replaced the bulb, however now it will only run for a couple of minutes then the remote and all selection buttons will freeze up and it turns itself off. After turning itself off, the green timer light flashes rapidly. Once it has stopped flashing, I can turn it on again only the problem is the same. I have tried the reset button on the front, no change. Any suggestions?

Factory reset with remote, power up tv immediately enter "MENU 1,2,3" ... Flat Panel Televisions

I have cello C3298DVB-IP. i tried to set up for internet. after completion screen went blue and it is frozen and says 576p on top right of screen. no buttons change it including IP button. cannot reset it back to set up. help please

... Combination Televisions

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.

Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po

Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

Power light flashing on the front. tv won't come on. Have unplugged and tried other outlets to no avail. Any ideas? Do these have fuses or a reset button.

To reset, you need to unplug it for about an hour, more likely that it has power supply problem due to bad caps (same chassis as 37" as shown in my pictures). The caps may look normal, most of the time the bad one will have dome tops. There is also m ... LG 42LC2D 42 in. LCD HDTV

Have a Yamada DVR-9300HX. It has decided not to respond to anything! Remote or by pressing buttons on front. Unplug, then plug back in..it says 'hello' then sticks in the CVBS2 position. It won't even allow disc eject. HELP! It's needed for work! Is there a reset procedure I can go through?

... Flat Panel Televisions

Hello, I have a 52in RCA projection tv, model D52W20BYX1. It used to work fine but now whenever i try to turn it on it the power button light turns on and the tv makes a short whistle sound, this happens three times without me pressing anything and the tv still doesnt turn on, what do i need to fix this?

Hi,Not sure why chat got closed/ disconnected.There is big transistor TL010 attached with heat sink near flyback transformer, this is horizontal output transistor, check it and replace if found shorted.Thanks. ... RCA D52W20 52" Rear Projection HDTV-Ready Television

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help

... Flat Panel Televisions

I dont have my TV set in cable etc., it is used with an indoor ariel and that has worked fine until 18th when it went to digital....i have tried the reset button but it doesnt give any options should i throw it away

Look or inquire to see if a digital box is available--antenna goes to it and it to the set. ... Flat Panel Televisions

The reset light is blinking continuously. Unplug the TV for 10 minutes, didn't fix problem. Power button at front of TV cannot turn TV on/off - it's frozen. At this point, the remote control doesn't help.

My first move would be to inspect the power supply board for bad capacitors. look for a bulged or skinned capacitor. Even if these capacitors look good, they may be failing. You will need an ESR meter to check for current. You will need an ESR meter ... Mitsubishi Flat Panel Televisions

I connected my Polaroid TDA-3211C to my laptop, and before I could switch to dual display the TV said no video powering down. After that I can not get it to power up. Is there a reset button someplace? I tried unplugging for a few minutes no help.

Try hitting the INPUT button on your TV or your remote. More than likely it is on, it is simply not showing a picture. Try switching INPUT to the TV selection. ... Polaroid TDA-03211C 32 in. LCD HDTV

I have been given a Orion tv. Model 32BKP TV 32F44. It has menu and channel up an down on the front. I have the remote which has a few menus but nothing to tune a channel. Looking on net some people say to press 2 buttons at the same time. I tried a few but still not found it. Hope you can help me.

... Flat Panel Televisions

I have a 42 inch plasma tv that does not appear to be getting power. I had an electrical storm this morning and the power went out for a couple of seconds - enough to cause the clocks to need reset. I did not notice anything until I tried to turn it on tonight. I have unplugged and held power button, but nothing. I can hear a cllicking noise from the back when I stand near it. Red light on the front not on. Any suggestions?

The tv power supply board,the board it is shorted and dead.This the board where the tv power a/c cord is plug into it.Must change the tv power supply board,tv should work again.If tv still have the same problems.The main logic tv Tuner signal board a ... Samsung HP-R5072 50 in. Plasma HDTV

Push power button and tv clicks but no video or sound. tried resetting but didnt help. could it be a capacitor?

It can be a problem with a capacitor in the power supply, or some other component. These tv's have an auto shutoff circuit when any current overload is detected, so a shorted cap or any other device and trigger it.\015\012The unit will have t ... iLO IWT3206 TV

Hello i have an element 37'' tv and i have to unplug the tv several times just for it to turn on. There is a steady red standby light on but when you try to hit the power button it doesnt respond via remote or on the tv panel itself. The only way it will turn on is from a constant plug and unplug of the power cord. Please help?

There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Element Flat Panel Televisions

I have a Visio P50 HDTV20A 110-240V-,5.0A,50/60HZ. My husband was try to hook a USBcord it the back of the tv and he thought the service 1 slot was the place to plug it in. He didn't force it at all, it only touch the area and when it touched the tv went off. You can hear a faint humming sound and a light backlight but it doesn't appear to be getting power. The front lights aren't on nor will the tv come on. Does it have a reset button or did he blow a fuse. How much will that cost to fix and

... Vizio Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1043 seconds