Having problems with your Projection Televisions ?

My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My mitsubishi ws-65513 picture makes a pop noise then goes out with the sound but can still see video source info on corner of screen. then i have to turn tv off wait a couple of seconds then back on then tv will work for a shourt time before picture goes out again. i have looked at the four caps on the Dm board they dont look faulty or bulging but dont know if that is the problem


... Mitsubishi WS-65513 65" Rear Projection HDTV

I have just got sky + hd, the problems is since connecting it to my philips hd tv every so often the picture goes black, the sound is still there, the picture goes off for between 1 & 5 seconds, it can happen every 2 minutes or not happen for a couple of hours, i have had a new hdmi cable and a new skybox and neither has fixed the problem. it is the tv?


... Philips 32PFL5403D/27 32 in. LCD TV

32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of


Log in new account ... Flat Panel Televisions

The screen was black with white dots all over it, I replaced C766 with a 220uF 35VDC capacitor, I now have a picture on component 2 only but in black and white, AV1 and 2 same original problem all black with white static. When the screen first comes up the picture is in the upper left corner black and white only with a bright green bar under the picture, wait a few minutes and it goes full size in black and white. What do I need to do to fix this problem?


Look for more bad caps, sound like on video board also problem ... Maxent MX-42XM11 Television

Don't know if it is a satellite problem or tv problem. Picture fine one minute then starts to flip like it's going to go off then goes off leaving either snowy screen or black screen


... Panasonic PV-C2022 20 in. TV/VCR Combo

My Sony KDL-40XBR7 has developed two problems. 1) Sometimes when changing channels the screen turns green. I can solve this by turning off the set then back on, but what's causing the problem? 2) In the past few days whenever I turn the TV on there are horizontal bands from top to bottom. They are faint and the picture can still be seen. Additionally the picture is ghosted; a second ghost image appears larger and below the original. This lasts for a few minutes then goes away. Of course, the TV


... Flat Panel Televisions

I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks


I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ... Flat Panel Televisions

I have hitachi t.v. model p50s601 when i turn it on the picture appeares about 1 second imeddietly turns off when it turns off no audio and no picture. already changed the capacitors on the power board c553-c552 = to 3300uf to 100 volts. checked xbus/xsus apperantly no problem. on the power board there is a voltage of vs=88.3v appeares in seconds then imediatly goes to 0. my question is what else can i check? or what could be the problem? thank you for your assistence.


The main rail voltage is not building up and so there is a possibility of a high drain on the output sections. The +B voltage seems to come up and then flatter off as there is a negative feedback to the processor to cut off ... Flat Panel Televisions

Emerson tv model LTDN42V68BUS i have a problem with the a/m tv, the problem is when I'm in the VGA mode the screen goes blue and back to picture intermitanhtly and the picture also starts vibratin


... Standard (CRT) Televisions

When switching on my plasma 42pma400a ,the screen lights up for a second and then screen goes off(completely off mode) ,then led goes on orange from green.The real problem is that i dont know where is thye problem located exactly?i mean is it in the power supply board or mother board?waiting for your help in advance...cheers mate


... Hitachi 42PMA400 42 in. Plasma Television

I posted a problem on how to remove panel but I solved it. Now as I mentioned the tv comes on goes green then black no picture just sound. I followed instructions on adjusting G screw but it doesnt work still have same problem I notice that when it goes black all tubes are off. please HELP can this be fixed I will be awaitng for an answer. Thankyou


... Projection Televisions

Samsung L32A330 picture disappear after a while but sometimes its ok . sound no problem . when picture goes back light also goes


... Samsung Flat Panel Televisions

What does it mean when the picture goes in and out on my Sony Wega?? I'm watching a program then the picture goes out momentarily then comes back.. if its a simple problem,then please tell me what I can do..


... Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

I have a samsung ue40es6800 tv when switching from 3d back to normal 2d (3d off) the picture goes very dark with a strong red hue with a hint of blue. if u switch back to 3d, picture is displayed correctly again. You have to switch the tv into standby then turn back on and picture is normal no problems it only happens when exiting from 3d, changing channels once exited from 3d doesn't correct it.


... Samsung Flat Panel Televisions

Hi. We have an old analog TV (Sony) which has a new digibox running through it (since the switch over). Was fine, but over the last few weeks, intermittently, the screen goes black with EXT 1 in the top corner, but perfect sound. Change channel, no picture, perfect sound. If we fiddle with the aerial cable, the picture jumps back. This happens sometimes after 30 mins of perfect picture, and sometimes after 3 hours.. sometimes not at all!Have replaced cable, no joy - same problem - and to be fair


Your picture tube is on the (Verge) Of going. ... Flat Panel Televisions

I have the protron lcdtv 26,when i turn it on the screen flashes then goes to black.But when i oush the channel button it flashes the picture for a second and then goes back to a blank.The light at the bottom goes from green to amber repeatly,and i also notice there are a few capacitors on the power supply that are warped,what does this seem that the problem is?


Those capacitors have to be changed, I would also look on the inverter board for bad caps, change these and you should be good to go. ... Protron PLTV-26 26 in. HD-Ready LCD Television

TV Sony Bravia Model KDS-60A3000. Why does the picture go black and the sound stays on after the TV has been turned on for 2-3 minutes? Then after another minute or 2 the picture comes on again then goes off after the same amount of time? Note, when this happens the on/off light flashes while the picture is black. your problem?


This could indicate the lamp is about to fail............ ... Projection Televisions

W32701 lcd tv picture lights when turned on and then immediately goes out. problem got gradually worse. for a while we could turn the TV off and then turn it back on and the picture would stay lit


It can be backlights inverter, main board, T-CON board, power supply module.\012Please try my instruction below first to help you narrow down the problem.\012Pictures of the boards and prices so you will have some ideas: ... Westinghouse W32701 27 in. LCD HDTV

Samsung, standby, lamp, timer. TV turns on with sound and picture. After about a minutes the picture goes away and then the sound. Then the standby, then the TV will shut down. but the standby, lamp and timer lights stay on. What is the problem?


... Samsung LTP326WX/XAA 32 in. HD-Ready LCD Television

Samsung 940N , picture OK, backlight goes of after 1-2 seconds. Opened the monitor ,all capacitors seem to be OK, (no blowouts). This part (AP4525GEH) - N AND P-CHANNEL ENHANCEMENT MODE POWER MOSFET , seemd to neated the board on the other side since the board is darkened(not a lot).Found it on www.alldatasheet.com , measured it and seems to be ok. Surfing the web for a the problem found ot a "solution" for this "2second" backlight problem and they said if you have this "2 second" backlight i


... Flat Panel Televisions

We have a 52" Mitsubishi t.v, model # VS-50707. The best way I can describe it, is it's like when a tube goes out on a regular old t.v. It's not focused in and everything is outlined in red, green and blue and the picture doesn't fill the screen, the picture is like the screen is bowed. I hope this makes sense. Does anyone have any ideas on how to fix this problem. Thank you, Yvette


See attached photos--will not look exactly like your set but you are having what is called a convergence problem.There are sites that sell kits by brand/model number but you have to be able to get at the parts and also be able to solder. ... Projection Televisions

Hi expert. Ihave a problem thad I dont know what it is with the plasma tv . I have sound but no picture I trouble shoot the powersupply did not find no parts bad .can you tell me or explain me what the problely problem can be ? best regard rudy . ps the model of tv is plasma tv spn 4235 samsung


Hi,I\015\012 am sorry to hear regarding the trouble.Unfortunately, this is a common \015\012problem i came across a couple of times in my shop.This is an internal \015\012fault and needs repair. Though, technician is recommended in ... Flat Panel Televisions

Have a Proview pa-19jk7. When you turn on the TV, the logo screen appears, then the whole screen goes blank. If I try it in a dark room, I can see the picture with a flashlight, and sound is good. I have taken it apart, and dont see any blown caps. I just dont know if its, the power supply, inverter, backlight. Are there any clues from the logo screen appearing first? Thanks!


In this the the backlighting is done this way - the power source delivers an low DC voltage of around 24 volts to the inverter board , the inverter board ups that to about 500 volts DC and delivers them to the CCLF tubes (basically some thin neon tub ... Proview PA-19JK7 19 in. LCD Television

I have a RCA 55 inch projection hdtv and it wont come on!!! when i push the on button the lite comes on but no picture and no sound and then it goes back off... its then tries to power back on by itself and goes back off... It tries three times and then stops... what seems to be the problem?


... RCA D52W19 52" Rear Projection Television

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3682 seconds