Having problems with your Projection Televisions ?

Hi, my tv have multi color picture, started last night and changes to rainbow colors also you can see duplicate copy of a person head the time the channel, can you advise what is the problem, it is a Mitibushi tv 1080 and some time at the bottom of the tv they are bow shape color lines Thanks, Praaksh



Answers :

Hi

The problem is in the color convergence power supply. With the back cover off you'll notice a set of boards on the bottom of the TV and a pair of boards sitting up over the two bottom boards. The convergence power supply board is in the upper-right hand. You need to replace or repair this board. If you are not able to do it by your own seek help of a repair person.

Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com


Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi, my tv have multi color picture, started last night and changes to rainbow colors also you can see duplicate copy of a person head the time the channel, can you advise what is the problem, it is a Mitibushi tv 1080 and some time at the bottom of the tv they are bow shape color lines Thanks, Praaksh


Hi The problem is in the color convergence power supply. With the back cover off you'll notice a set of boards on the bottom of the TV and a pair of boards sitting up over the two bottom boards. The convergence p ... Mitsubishi WS-55809 55" Rear Projection Television

I have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck randomly on a particular channel that I was watching at that point of time. Along with that channel it now shows a message in flashing red color that reads :- AGING 0211H Now when I press ''Display'' button on remote control volume goes off and this code is shown :- S123 K234 Y 000 001 1


... Flat Panel Televisions

Error codes I have Aiwa TV MODEL No. TV-A219 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck randomly on a particular channel that I was watching at that point of time. Along with that channel it now shows a message in flashing red color that reads :- AGING 6589H


Its main system control memory IC is damaged. Replace it with same number. This IC is a very small one, having 8 solder terminals, and can be located very near to the main system control IC. Usually start with a number 24C**. Check and replace it ... Aiwa TV-S2011 20"

Hi, Every time I change the channel, there is a dark square box that appears and the only way to make disappear is by shutting off the TV and reopen it. it will occur again if I decide to change the channel again. What can be done? is there a solution to my problem? Advise tks Paul


Try and find the settings on your TV that controls PIP (Picture In Picture) or POP (Picture Out of Picture) and turn it off. Hopefully, that's what your problem was. ... Flat Panel Televisions

I have a Samsung TV model LN40C530F and I have 2 problems with it. 1. Suddenly, the sound rises for a few minutes and it comes back at the initial level. It can happen several times during a program. 2 . Every time when I switch from HD channels into analogical channels, the picture moves to the right about 2 inches. I have to look out in the settings and make an image test so, the picture comes back central. I called Samsung customer service and they told me the problem was coming from the sign


This happens a lot. I would blame the tv itself. I've worked on samsungs with faulty CCFL lamps, faulty backlight inverters....faulty mainboards ETC. I believe this is a video signal issue going from digital to analog which corrilates with the tuner ... Samsung LN40C530 TV

I have Aiwa TV MODEL No. TV-A219 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its


HelloCheck your remote control hanset for proper functioning. Get into this link to know more about the faults and repair to remote contorls.htt ... Aiwa TV-S2011 20"

My sony trinitron color tv (model KV-XA21 M83) has been having a problem over the last one year. The TV mechanic on his last visit was unable to diagnose the problem as it started working when he was present to check the problem. Now it blinks 2 times (red color) and does not turn on. I would be very grateful if you could suggest what needs to be done.


... Flat Panel Televisions

Samsung LE40R73BDX/XEU channel saving problem. I have had to do a reset to the TV because the 'D Menu' was not accessable. The reset has got back all of the digital channels (as well as the analogue) and the TV works ok until it is turned off (power standby). Now each time that the TV is turned on all of the digital channels are lost resulting in having to do a retune. Any solutions to this problem?


... Flat Panel Televisions

Hi. I have an LG 47LB9DF-UA LCD TV with a video problem. Originally, I had problem with horizontal lines, accompanied with a lag. After a short time the screen would then get multi-colored vertical lines. If I turned the tv off, then back on, the lines would be gone. If I left it on, the process would start over again. I opened the tv and found two connectors from the power supply board to the main board loose. After removing then reconnecting them several times, the problem cleared up. I l


... LG Flat Panel Televisions

Channel scrolling While watching TV, the channel might suddenly change for no apparent reason. I can go back to the initial channel and some time later it will change again, up or down. I usually operate the TV with the original remote and made sure it is not the culprit. I can watch for extended time through the Video input. Does this mean I have a problem with the TV tuner? Would a factory reset help? Do I have to change a board?


... Toshiba 40RV525R 40 in. HDTV

My Toshiba TV, is having picture and color problems. The color is lost, at times, the the picture looks like a negative. Sometimes, the color returns, but the contrast is bad.


... Projection Televisions

Factory Settings Problem with TV. It appeared not to save the channel settings and the tuning had to be redone several times. It now seems that the digita signal for the ABC channels is the only problem. One of the suggestions made regarding my original query on Fixya was on a different Sanyo tv model. That was to reset to te factory settings. I couldn't find how to do that in the manual and I am wondering if you can provide instructions.


What model Sanyo television? ... Flat Panel Televisions

I have an issue with my LG 32LE5300, when you start the TV there is no problem but at the moment if you chnage the channels it does not change the image, it is like you have only one channel and little more time later the image dissapear and it sounds like old TVs when does not have the TV Antenna. Also when I am playing with my PS3 for moments does not recognize the Video at the HDM1, already change the cable and tested the PS3 in another screen an no problem. It is like the Video card is dam


... LG 32LE5300 Widescreen 32 in. HDTV

Samsung HL85688W DLP TV. Turned on the TV .....channel came on, color is good and audio is fine. Changed channels and found it was only getting 3 channels. Tried changing "source" got black screen until I got back to the 3 channels. Unplugged TV for 50 minutes to let it reset ..........turned back on and have the same problem. What do I try next??


... Samsung DLP HL-P5663W 56" TV

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards


Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

We have the following problem with our Sony Model No. KDL 40V 4000 CD Digital Colour TV. All channels are perfect except for SBS channels, Coffs Harbour Channel 10 & 1HD Coffs Harbour. We frequently experience pixilating reception (particularly evening). Could you please advise solution/reason. Regards DEBBIE WILLIAMS


Hi, well it is the "(particularly evening)" (sic) that gives me the answer to your issue, I feel, there are two possibilities. One that the signal is being degraded by something, some sort of interference is degrading your signal.\012\012\012 ... Sony BRAVIA KDL-40S2010 40 in. LCD Television

Hi everyone, Im new to this thread, but I have very high IT experience. However, I have a problem that I just cant figure out. My Dynex tv randomly started acting up. All my colors and channels are rediculiously fuzzy, and the pixels are all out of sync and shaking all over the place. I have standard cable connected to this TV so I get my 70 standard channels plus locals. However, my locals I get in standard and digital HD. The weird thing is my local channels I pick up in HD are perfectly fine.


Check the connection to your tcon board and main av board. if the connections are good one of these boards is more than likely bad. Google their part numbers and see if that board has a known issuethanks,michael ... Dinex DX-LCD26-09 26 in. HD-Ready LCD TV

Picture problems My 4 year-old Panasonic VIERA TX-32LZD80 32 in. LCD TV is becoming unwatchable. The main problem is the picture keeps distorting and jumping along with a 'zip' sound or distortion to the sound at the same time. The distortions are horizontal and getting so bad I switch it off and give up trying to watch. I had a similar problem quite a while ago, then it got better and now its back - but much worse. Some channels just produce the odd small distortion,whilst others are unwatc


... Panasonic VIERA TX-32LZD80 32 in. LCD TV TV/HD Combo

I have Sony Bravia KDL-42W4100 which is setup to receive TVGOS. I've received TV Guide since 2009 but frequently lose it apparently host channel has problems transmitting from time to time. What


... Flat Panel Televisions

I have a Hitachi 60-inch Projection Color TV Model 60FX32B. Love this TV! It started showing red ghosting and sometimes the picture is better than other times. We calibrated the color but the red line will not move all the way over to the center of the other lines is off by a hair. How do we fix this problem.


We had it fixed by an expert, replaced two STK 4274 Resistors, only cost $300.00, works great now. ... Hitachi 60FX32B 60" Rear Projection Television

Just purchased new Toshiba 47" VL900 TV in Australia. Notice that on some HD channels at times I get audio/video sync problems. Sometimes video pauses momentarily perhaps for a second. Is there a setting to resolve the sync problem? Thanks.


... Toshiba Flat Panel Televisions

Repair not showing a clear picture. shows lines and black and white, takes a long time to warm up and then fades into color then to color and clear picture. what can be the problem?


To have a fair chance to advise or help I need to know the model number and brand of set(JVC)? ... JVC Flat Panel Televisions

Mitsubishi model VS-50605 channel problems most of the time i ant get channels to work


If you are using cable , channel 3 is set. ... Mitsubishi VS-50605 50" Rear Projection Television

So my tv appears to have a convergence problem. Sometimes when I turn it on the red and green colors do not line up, creating a picture similar to the old 3d movies. However, sometimes if I turn the tv on and off a few times it will correct itself, but only for a short time. What needs replacing?


Purchase the convergence repair kit......not very hard to do yourself ... Sony KP-43HT20 43" Rear Projection HDTV-Ready Television

Red is ghosting to the right. i replaced the convergence tubes about 6 months ago. went with the expensive ones "not the cheapy's" used heat sync putty stuff and everything. the problem is different then the one i experienced the first time, that was more of a wavy color problem. could this be a convergence issue also?


Yes,the tv problems it is the same,it is the tv convergence problems again,now it just color it is shaded in shadows pictures,instead of wavies mis colors R,G,B mis alignments.Yes.The tv convergence board it is the problems,must be repair again. ... Sony KP-57WS500 57" Rear Projection Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9855 seconds