Having problems with your Projection Televisions ?

My blue and green coloring is messed up on my Mitsubishi Medallion. I can't get it to have both colors normally, it has to almost be one or the other. Is this just a contrast issue, or something



Answers :

Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from site such as www.TvRepairKits.com

Common Problem #1) Convergence has gone out

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. The power light will blink. TV may also make a chirping noise.
Here are some pics of convergence problems.


7859b01.jpg

e87380c.jpg
69189a5.pngSOLUTION #1

What you will need to do is convergence. You can get a repair kit from TvRepairKits.com . It includes replacement parts,step by step instructions, support, etc.

Common Problem #2) CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

69189a5.pngSOLUTION

What you will need to do is replace the coolant and clean the crt. You can get a repair kit from TvRepairKits.com . It includes replacement coolant,step by step instructions, support, etc.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My blue and green coloring is messed up on my Mitsubishi Medallion. I can't get it to have both colors normally, it has to almost be one or the other. Is this just a contrast issue, or something


Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instr ... Mitsubishi WS-55613 55" Rear Projection HDTV

I have a big rca projection tv that I purchased in 1999. The image was becoming hard to see and then one day it just quit working. It almost seemed as if something blew. There were green and red colors across screen before it happened. My model # is p46813bl. Thank you for any info you can give me.


... Projection Televisions

DP50749 is the sanyo model number having color issues trying to fix it to its normal colors but cant anyway i can fix it plz


... Sanyo Dp50749

Hi I just got a tv from my friend and when I plug in that color was red mostly red and I try to fix to move the color control on the back but dosent work so now is so blue and I dont know how to put normal colors can any one can help me?


... Philips 55PW9363 55" Rear Projection HDTV-Ready Television

White LED scrolling then click and then the top two LED lights turn red with the first one constantly on and the second one flashing.hey guys we were given a rear projector tv by family friends and they said they were watching it one morning and it just stopped working they said it was a bulb issue and it needed replacing but further research tells me its not. i read in another question it could be C871 problem? something to do with the first filter board.


You possibly have a lamp issue but most of the cases like that,,The capacitor is leak or bulged on top..You have to replace it to fix the problem ... LG 62SX4D 62" Television

I have a 52 inch RCA rear projection TV and have had it for nearly 5 years without any issues. Now when I turn the TV on, the button lights up green on the front as normal, but after about 5-10 seconds, the button and tv turn off? It all started when I was watching TV one day and about 30 or 40 minutes into the show, the TV turned it's self off...I turned it right back on and this is what it is currently doing...? What can I do to hopefully fix this issue because the TV is a great TV and I wo


I would try resoldering the flyback terminals thats a component thats prone to have solder issues and it will cause those same symptoms. ... RCA D52W20 52" Rear Projection HDTV-Ready Television

I have a Pioneer SD-532HD5 Projection TV in which the picture is clear but dark and the colors appear weak- better color if a cartoon video. I have adjusted the contrast to max with minimal benefit and cleaned the lenses with little benefit as well. Is this a CRT tube problem or a STK-392 -110 convergence chip problem or something else. I have successfully changed convergence chips in a Toshiba TV before but do not know what to do next. Any ideas?


Not convergence issue from description and if lens did not help when cleaned have a close look at the mirror as well to make sure not grimy or dirty, usually can peek in from the rear and up to examine it.From the age of the set it could also ... Pioneer Projection Televisions

Screen burn have screen burn issues since almost new but worse now am i only one that has this issue


IF fixed images are burned into the screen it cannot be reversed or "fixed" and the only solution is to replace the optical unit (if used) which is part of the light engine on DLP setsIf it is a LCD flatscreen only the display panel can cure ... Toshiba 37HL66 37 in. LCD HDTV

Have a 6 month service plan lcd Bravia tv the problem s the screen was divided by horizontal line & the 1st normal color the 2nnd one color s very bad for my aye pls. give me the solution how to repair my tv thanks


... Sony Bravia KDL-42V4100 42 in. LCD TV

Red is ghosting to the right. i replaced the convergence tubes about 6 months ago. went with the expensive ones "not the cheapy's" used heat sync putty stuff and everything. the problem is different then the one i experienced the first time, that was more of a wavy color problem. could this be a convergence issue also?


Yes,the tv problems it is the same,it is the tv convergence problems again,now it just color it is shaded in shadows pictures,instead of wavies mis colors R,G,B mis alignments.Yes.The tv convergence board it is the problems,must be repair again. ... Sony KP-57WS500 57" Rear Projection Television

??? My LG 50PN4500 TV has a strange one-time issue, I turned it on last night (was on standby) and a full screen "shadow" pattern of squares appeared? They were gray but I could see the colour programme still playing like normal behind them? Squares were about 1.5cm squared, each one was spaced about 2cm away from it's neighbouring squares- it was literally a completely symmetrical see-through pattern covering the whole screen. Anyone know what it was? I did change channels and run the DVD play


... Flat Panel Televisions

Color smeared I purchased this TV in 2004 and it has been great. It worked great last night but when I turned it on this morning there was a picture but there were large globs of color on the screen with a big purple one in the center of the screen. At the very left edge of the screen there was a thin vertical stripe that looked normal. There appeared to be a horizontal line through the middle of the screen. I assume that there is a technical problem. Thanks Tom - [email protected]


... Philips 42pf9966 42-inch Hd-ready Flat Panel Plasma Tv

My LCDTV has a problem, Model number is 6626LCT, Now on to the problem, While doing yearly cleaning on my tv as normal, after i plugged it in it was normal for 40 seconds, It flickered and the screen went from Black to white on the input menu. while watching TV it's weird, All the other colors, Red,brown,green,blue, etc turn up fine, It's just the black that has the problem, Like i mentioned before Black is now white, or a fuzzy mix of red,yellow,white,green, or one of each on it's


Only suggestion is if set was plugged in when you did what you did--unplug it and any box or receiver plugged in and wait a while--plug back and let the equipment try to reboot. ... Sylvania Flat Panel Televisions

Mitsubishi 65" DLP is starting to have color issues - there is no blue color in the picture


... Mitsubishi Wd-65738 65-inch 3d Dlp Hdtv

My Toshiba TV, is having picture and color problems. The color is lost, at times, the the picture looks like a negative. Sometimes, the color returns, but the contrast is bad.


... Projection Televisions

My samsung LN40A550 started taking a while to come on until it finally did not come on. I have changed the two boards .. it comes on as normal but the picture is very bright with lots of weird colors so I cannot see the image properly ...what can I do ... the new video board I put in is BN41-00975B which is identical to the original ...at least in looks ...any assistance with this one?


... Samsung LN40A550 LCD TV

I have a 2003, KF60WE610 60inch TV. My TV started occasionally losing the picture. The TV will go from normal picture to color patterns yellow/orange, green/blue, black and white. Then I'll have a black screen. The sound is fine. The picture returns without doing anything. The lamp light does NOT blink. The lamp was replaced a year ago. The green power light is steady. What could be the issue?


Your optical block is going bad. Sony has made a recall and is offering to pay around 70% of a new tv. Call this # 1-800-282-2848 Hope this helps. ... Sony Grand WEGA KF60WE610 60" Rear Projection Television

Vertical stripes every summer my TV has these verticle strips that are multi colored that show up. they start out faint and get almost solid. this year I have two so about 1/4 of my screen is not viewable. I am sure it has something to do with heat since it does not happen in winter.


Check this youtube video:http://www.youtube.com/watch?v=XWWayjFU1Jwi fixed my LN52A550 using that method.but here is the ultimate solution:never buy a samsung again. ... Samsung LN-T4665F 46 in. LCD Television

Sony KDL-40V3000 showing white(ish) image.? I recently got home from festival and powered on my TV only to find that the picture was all white(ish). When I say "ish" it's because it was white but with some light blue/grey shades, kinda like a negative picture but with no dark colors. I have checked that the issue is not with the input as I get it from my PC and my PS3 aswell.. When I change input the screen used to go all black, now its light grey, almost white. I tried disconnecting the po


Sounds to me like half an hour and an experienced eye will find and resolder the bad connections.Hope that helps. ... Flat Panel Televisions

I have TV Philips matchline (25DC2065/20R) and when i connected with antenna all channels black and white (with little blue)and when i connected with Wii it's normal and have colors , if any one can help will be nice , thanks


... Philips Flat Panel Televisions

I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver


The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ... Samsung LN40B530 40 in. LCD HDTV

The picture all of a sudden turned a grayish color without much contrast. Also, when I turn the TV on, the picture starts in one corner and slowly spreads to the rest of the display


Change the y saux ... LG 42PC3D 42 in. Plasma Television

Almost every day our t.v. fades in&out for a few seconds. Maybe once. Maybe twice or more. It's seems to be the back ground of the picture. It's during the light of the day. Good color. No other issues & we really like set. It's 46" LED. we bought @ Xmas. Can you help. R.Barg 586-731-6060. THANK YOU


... Samsung PCL5415RB 54" Rear Projection Television

I have a sony color rear videoprojector tv model kp-57ws500 that when i turn it on its blurry and video or dvd word is red blue yellow almost like in triplicate. after about 45 min. it clears up and works normal. any suggestions?


If your TV looks 3D, warped, or distorted it likely has a convergenge problem. If however it just looks dull, washed out, redish, or if it looks like objects on the screen have halos the fluid in the lens has soured.You can search google ... Sony KP-57WS500 57" Rear Projection Television

My LG led has had several problems, it started out with the left half of the screen flipping as if viewed from a mirror with the right part of the screen normal. After that, it displayed vertical colored lines (blue, yellow, black, white, etc) which went away and now it shows a vertical bar about 4 inches across that looks darker than the rest of the picture. I also noticed images burning in everywhere except that bar. I know it's a lot of issues but any help would be appreciated.


This problems are a very tipical of the coded pixels on the LCD screen panel passes through the board that call the T-CON decoder board to causing this problems.Vertical colors lines display on the LCD screen panel happen by itself.Yes.The T-CON deco ... LG 32LE5300 Widescreen 32 in. HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1005 seconds