Having problems with your Projection Televisions ?

I have a mitsubishi ws-55315. Only the Composite 1 inout and monlink input with an hdmi adapter work, and only with certain components. the monlink works with my Dish reciever, and my xbox 360 work on the comp 1 input, but my ps3 doesn't work with either. I have picture with it, but the upper right hand corner is completely out of whack with a serious distortion and convergence issue. What is this?



Answers :

Normally I would provide you with the 4 digit code to reset the entire set and restore all inputs

I am away from home and do not have the information here===these sets have three hidden service menus==one for adjust, one for convergence and the last for a Hard reset of the entire set.


set gets turned on with the Mitsubishi remote and a four digit number code (by model number) is entered and then enter button pressed.

Set reverts to factory default on ALL settings.

Mitsubishi is reluctant to tell people who phone but usually will if you tell them you know it has this feature.

This should restore all inputs and if you have labeled any inputs (like video one being marked dvd) it will remove those as part of the process.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a mitsubishi ws-55315. Only the Composite 1 inout and monlink input with an hdmi adapter work, and only with certain components. the monlink works with my Dish reciever, and my xbox 360 work on the comp 1 input, but my ps3 doesn't work with either. I have picture with it, but the upper right hand corner is completely out of whack with a serious distortion and convergence issue. What is this?


Normally I would provide you with the 4 digit code to reset the entire set and restore all inputsI am away from home and do not have the information here===these sets have three hidden service menus==one for adjust, one for convergence and th ... Mitsubishi WS-55315 55" Rear Projection HDTV-Ready Television

Vizio Having trouble with my Vizio remote. The List, Menu and Info buttons are not working. When I press either one, the picture goes to the upper right hand corner and the rest of the screen is black. Is there a way to fix or reset this?


... Flat Panel Televisions

I just got this TV used and for free and im not sure if i have the original remote but right now the only input that works is the rear input 2, none of the other ones work. In fact i cant even switch to any of the other ones so im not sure if its cause it cant see the other inputs or just that im unable to switch to them. The TV is in great condition and the picture on the Antenna and Input-2 look great so i cant understand why the Input-1, YpbPr and the front input do not work, please help me.


Hi,Click this LINK to view the original remo ... Mitsubishi WS-55809 55" Rear Projection Television

Input Problems When turned on, the HDMI1 input shows up in the upper right corner, then the set gives a no input message, also tried hooking cable directly to the tv and the auto channel search did not work, and the set does not respond to the remote. The set worked fine yesterday, and when I turned it on this evening it started this. Any help would be appreciated.


... Flat Panel Televisions

My Samsung le37a556 has been having problems with the left hand side of the screen. When it is first switched on the left hand side is black but the right hand side is fine, after a while it starts to get better but with lines through it then if I give the tv a little shake it works as normal but then after a while a thin strip that is lighter than the rest of the picture appears and doesn't go away


... Flat Panel Televisions

NO PICTURE ON TV / JUST BLUE SCREEN / W/RED SYMBOL.Have an Advent TV -- seems locked up, can't get a picture, just a blue screen with a red symbol in upper right hand corner


Look to the owner manual if you have it as it will likely have the answer you need--if no manual Google the model number with "manual" to try to locate the owner manual---if get or have it read it carefully as it sounds like to me the parental lock i ... Standard (CRT) Televisions

No picture on Mitsubishi VS 50703. New to me TV. When we hook it up, we get sound, but just a blue screen. If I press the menu button, the sound and picture come up in the upper right hand corner. Any ideas how to fix this?


Maybe it is in picture-in-picture mode ... Mitsubishi Projection Televisions

Picture is small box upper right hand side - Daewoo DTQ-20U9SC TV


When picture is getting smaller in size or goes away or moves towards one side ( like yours) then hit your TV lightly on left side or right side or on top & then observe ..........you will get normal picture or it comes & again it goes....if it ... Daewoo DTQ-20U9SC TV

Closed Caption I can't get the Closed Captioning to work using the Caption Button. The menu comes up in the upper right hand corner, but no captioning happens.


Try to go to menu and find the CC close caption option there.. ... Sanyo DP26640 LCD TV

Hello, Problem: 1. Converter is not working even after changing batteries (no light on converter) 2. 'Freeze On/Off' keeps flashing in upper right hand corner of TV. 3. The button(s) are not stuck. 4. Sometimes '00' or the 'chanel Number' that I manually put TV on keeps flashing. Thank you, Lavern 416 479-2497


Hi Lavern.If there is no light on the converter, then the converter is probably defective. A defective converter may cause TV malfunctioning, and in some case may even damage the TV internal tuner or terminal circuits (input connections). ... Flat Panel Televisions

I have a Polaroid TLX-04240B It comes on and Displays the Polaroid logo, then it goes to a black screen with the HDMI1 input box on the top right hand corner. THis box eventually disappears, leaving me with a black screen. The menus seem to work. But the signal only dispalys a black screen. When no source is connected, it will display the blue screen stating no signal. Apparently it is getting the HDMI signal but unable to display it? I have taken it apart and inspected the capaci


Buy another HDMI cable.Try another HDMI cable with another HDMI hub on the tv port.If u still have the same problems,mean the whole main tv Tuner signal board have problems and the caused.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new ... Polaroid TDA-03211C 32 in. LCD HDTV

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

I have a Sony Wega DLP with no sound through HDMI all of a sudden. Can't give exact model at the moment but it is a projection TV definitely 5years old at least. It has only 1 HDMI input and I've been using a splitter box to run my DirecTV and Xbox through the HDMI input. Worked great for years then recently there's no sound. Picture works fine and sound works through component inputs. Any ideas? Do I need to replace the HDMI input or something?


... Projection Televisions

Sylvania LC260SC8 LCD TV has no picture. It displays white & black vertical lines on the middle to left had side of the TV. Audio still works fine. I swapped out HDMI cables, tried using the component inputs, hooked the co-ax to the TV instead of the cable box, tried 2 different video inputs all with the same issue - no picture, only audio works. Is there something that can be done to fix the TV? I love this TV. It's only 3 years old. Thanks for the help.


... Sylvania LC320SS8 32 in. LCD Television

I have a Westinghouse LTV-32w6HD that has no picture but faint multicolor vertical lines that change according to the input (the lines change as the picture would normally change). I'm on HDMI input but have tried other INPUTs as well with no differences between them. Sound is OK. Remote works. Set powers up normally- just no picture. Where do I start? A schematic with voltages would be nice!


Two possible causes for that problem..1- T-Con board that drives lcd panel (screen) is bad and need to be replaced.2- LCD Panel (screen) itself is bad and replacement may cost you more than tv worth.Schematics in service manua ... Flat Panel Televisions

Picture is stuck in right hand corner


... Westinghouse SK-40H520S 40 in. LCD TV

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

Hi, My Panasonic TX-32LXD80 is showing a picture with a scart input but none of the HDMI inputs are working. I've checked the Inputs with a different TV and they work fine. Is there a solution to this please?


... Panasonic VIERA TX-32LXD80 32 in. HD-Ready LCD TV

Tv fades from right to left on any channel or input(Xbox). After a while the tv picture lasts longer. The tv has to be on for about 10 minutes for picture to appear. Thinkin the backlight inverter but


You have defective capacitors on your power supply. You can tell which ones by the swelling top. Replace caps with the same value and your good to go. Should be about 10 dollars in parts. ... Standard (CRT) Televisions

My Toshiba 46g300u1 has sound but no picture. It will display a picture when I play a movie on my Blue Ray. I have checked the cords and inputs. It worked last night and no cords or inputs were switched. I think my 2 year old got a hold of the remote. How do I fix this?


... Toshiba 32AV500U 32 in. LCD HDTV

My 32' element.tv keep changing INPUT channels by itself and volume doesnt wor right, its even on the tv itslef not working right. I Can be watching something then starts flipping the hdmi input 2 so on and on...? Help!


... Flat Panel Televisions

I have a Hitachi 42PD5000 with a digital box connected gives normal TV picture thru RGB connections. However an connection from paytv box to TV aerial input now gives sound but no picture. Worked Ok before. Tried connecting thru other AV inputs but no joy.Any clues?


... Hitachi Flat Panel Televisions

None of my component inputs are working i have hdmi hooked in for cable, a computer hooked in to the computer jack, and they all work fine. i tried my xbox 360 in every available input with the component cables and get no picture or sound i have used multiple sets of cables


Did you switch the Xbox HD switch to the off position? ... Sharp LC-C4654U 46 in. LCD TV

My emerson hdtv has fading problem in upper right hand corner. The colors are fading to white, seems to be three white lights shining down from upper plastic rim for tv face. I can see the horizontal lines from about center to right edge and the same going vertically. So, 25% of screen is fading to white. Cannot find any help from menu options on remote. Anyone, know how to fix this? I am using the tv as a monitor for my computer, it is on the PC Setting.


If you notice the same problem with different input devices, the TV needs servicing. ... Flat Panel Televisions

I was given a Sharp TV model LC-26SH12U which was purchased Nov 2007. When I turn on the TV there is sound but no picture. I am using the HMDI input from my cable provider. I do get a picture at times. It seems as if I turn off and on the tv eventually the picture will show up. I have worked tirelessly with the cable provider and it seems to be the tv as when there is no picture I also hook up another tv and get picture from the provider while I'm getting no picture from the LCD tv. Is


Contact the nearest authorised service center for Sharp. You TV need service. ... Sharp LC-26D43U Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1551 seconds