Having problems with your Projection Televisions ?

I have a Mitsubishi and when you turn it on it turns off in about 2 seconds. When I press the menu and input buttons at the same time I get four green flashes a pause and then four green flashes again. Do you know what this means?



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Mitsubishi and when you turn it on it turns off in about 2 seconds. When I press the menu and input buttons at the same time I get four green flashes a pause and then four green flashes again. Do you know what this means?


... Mitsubishi WS-55315 55" Rear Projection HDTV-Ready Television

I turn tv on, the status light flash really fast continous, screen slowly starts to light up . I can see it getting brighter, the introduction screem Mitsubishi Electric Welcome screen displays, green light still flashing and then screen shuts off green light continue to flash for a few second then stops and tv is has shutdown. The process is about 30 to 35 seconds. scince 1/24/11 Tv has been starting up this way, but it would eventually turn on after several attemps. Know on 1/28/11 Tv would no


... Mitsubishi WD-73737 73 in. HD-Ready TV

Getting codes of 2 flashes then pause and then two more flashes. What does this mean


\015\012Error Code Operational Check\015\012Pressing the front panel "INPUT" and "MENU" buttons at the same time, and holding for 5 seconds,\015\012activates the Error Code Mode. The LED flashes denoting a two digit Error ... Mitsubishi WS-55819 55" Rear Projection Television

My sharp aquos lc 37d62u will not power on; the power light flashes 4 times, pauses and then repeats the 4 flashes. Does anyone know what this error code means? Thanks!


It is detecting shorted circuits or power supply problem, need in-depth troubleshooting. Inspect the power supply module first for any sign of bad caps with domed tops, DC output voltage readings check.\012If you are going to DIY and h ... Sharp Aquos LC-37D4U 37 in. LCD Television

I have a pioneer pdp-r05XE, on the plasma, the light flashes green and red alternately whilst on the receiver it flashes green 6 times. I can't get the tv to turn on...


Unplug if you have not done so BOTH units from power for several minutes (any cable or satellite box also connected.wait several minutes and restore power to all units which may allow them to reboot.Cannot hurt and may help. ... Flat Panel Televisions

I have a medion md30112 tv, one IC was blown, I Replaced it, it seems like it has no other problems, but when I turn it on the green power led keeps flashing and nothing happens... Do you know maybe what this means which way to go to check?


... Standard (CRT) Televisions

Hannspree tv model no. st281mab my son leant on the remote and now it is flashing from red to green to blue to white to black. I don't know how to get it off this test mode?


... Hannspree Flat Panel Televisions

When I plug in the t.v. all I get is a flashing red dot at bottom left, which should turn green to let you know T.V. is on..


This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 24v12v5v etc). Also look for popped c ... Philips 42PF9631D 42 in. Plasma Television

Hi I have a Mitsubishi HDTV 1080 Integrated and when I try to turn it on I get nothing except a green timer button that flashes. I have tried unplugging then plugging back in with no results I have also tried pushing the reset button also with no results, do you think you may know what the problem may be?


Trinz73,\012\012You did not mention the model number. If your unit begins with WS-xxxxx see my tip at http://www.fixya.com/support/r7065 ... Projection Televisions

I have a mitsubishi WD 62327 and was watching tv and then it shut off with a constant blinking red status light. pressed menu and input and get a green light that blinks 3 times then pauses and then six times what does this mean


... Mitsubishi WD-62327 62" Rear Projection HDTV-Ready Television

I have a 46 inch ergs Sony rear LCD TV and I replace the lamp but when I turn it on the green power light flashes 4 times and then goes red and starts blinking 3 times I know that that means lamp door is not on. But it makes a clicking sound is this the circuit board?


... Projection Televisions

I have a Sony SXRD KDS-R50XBR1...this problem was a green flashing light that turn to red and was flashing 5 times with a pause....I changed the large fan and lamp since I had the back off the tv.....now I have a green light that turns red and flashes 3 times and pauses....did I so something wrong?


... Sony KDS-R50XBR1 50" HDTV

Sharp aquos lc-52d43u you turn it on it powers up and once the screen comes on it shuts back off but the power light stays on and it will do this exact thing 3 times before it shuts off and the power green light and the opc green light flash together in a sequence 3 flashes and it will remain like that until you hit the power button again to get the same result everytime


... Sharp LC-52D43U 52 in. LCD HDTV

My Techwood TV Flashing from Green to Red then Blue.. My 42" techwood Flat screen wont turn on it simply flashes from red screen to Green Screen then blue! And can't get in to menu with buttons at side and don't have the remote


... Flat Panel Televisions

When I turn the TV on, the green power light comes on, then it turns red and finally begins to flash. There is no picture at all. I can get into the service codes via holding Volume down and input while clicking main power and get the "K" indication and can get menus with VOl up and Channel down. This should confirm backlight and power supply. Could there be a synch error?


Your TV will need to go to service agent for repair. ... Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television

Sharp lc-46le830u LCD tv does not turn on white arrow flashes 2 times slow than a pause and than flashes 5 times quick .it flashes this pattern over and over.what does this code mean?


It doesn't correlate to tthe trouble code in the users manual which are written. It sounds like a motherboard error. Try a cold reboot. Unplug the TV for 2 minutes then restart the TV and anything it is attached to. Unplug all first. ... Sharp Aquos Flat Panel Televisions

Hi I have a toshiba 32BV702B, I put it on standby and get the solid red light and leave it all day and when I come back and try to turn it on and I get a blank screen and get a flashing red and green light and I can't do anything, so I switch it off at the wall and back on and it comes on fine, is their a problem with the tv! Thanks guys


... Flat Panel Televisions

When powered up , all i get is a flash code on the timer L E D .... 12 flashes then pause,,,, over & over. is there a flash code?


You have the dreaded V26 chasssis. If the TV blinks about 3 blinks per second at the rate you mentioned, I would say the power supply is shot. Two leaky capacitors caused initial symptoms like you described but by now it probably has further damage. ... Mitsubishi WD-62525 62" Rear Projection HDTV

My tv is not even shutting off i lose the screen i get yellow flashing light then after a few 30sec to a min then i get screen back, when i go to shut it off i get green light i never got red light ju


... Toshiba 50HM67 50" HDTV

Hallo, The tv was manufactured in 2007 and aboult a month ago it turnet off it self and the power ligth keeps flashing green and red and if I try to turn it on it just keeps flashing and never turns on and somentimes it turns on by it self in the middle of night so I need to take it out of the outlet wall and sometimes it stops flashing and works fine for about 4 hours or so. Please let me know if there is somthing I can do or if I need to take it to repair. Thank you bso much.


Hi,Please replace power supply board in tv to solve this problem, required power supply board is available in shopjimmy.com for $80 ... Element Electronics FLX3711B 37 in. LCD TV

Hi There My panasonic TH42PWD8 is about 4 years old, and has recently started turning off by itself, the led switches from its usual green, to a flashing red. I counted 4 flashes, then a 3 second interval, and so it continues. I have read that this is probably a built in protection. What does this particular flashing code mean? How would I go about repairing?


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

Hi, my panasonic tv power light flashes green, then it turns to orange flashes 7times then stops and starts again=orange and repeats itself by flashing orange 7times over and over , Again This is the power button light, not to mistake it for the lamp light which I know when that goes bad it is red not the case here, I'm a pretty good do it yourselfer when it comes to electronics if it is a job I can tackle,what to do what to do? Thanks,Mike


... Panasonic PT-56LCX66 Television

I've a problem with a LG MS09AH.N40. About 3 minute of working the unit turn off and flashing 5 times green led and 2 times red led. Can you help me? What does it mean the flashing led? Thanks


... Projection Televisions

When i turn on my techwood the led light flashes once then there is a pause. then it just flashes red green blue :(


There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.If you ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1387 seconds