Having problems with your Projection Televisions ?

TRYING TO HOOK UP BLU RAY. NO LUCK. THEN THE TV SHUT OFF AND THE TIMER LIGHT STARTED BLINKING. TRIED RESET AND STILL NOTHING. THE TV WILL NOT COME ON. PLEASE HELP



Answers :

If your set is like mine hold menu & device for 5 seconds and you will get an error code.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TRYING TO HOOK UP BLU RAY. NO LUCK. THEN THE TV SHUT OFF AND THE TIMER LIGHT STARTED BLINKING. TRIED RESET AND STILL NOTHING. THE TV WILL NOT COME ON. PLEASE HELP


If your set is like mine hold menu & device for 5 seconds and you will get an error code. ... Mitsubishi WD62628 62" Projection HDTV

Hi, so I was told to replace my psu by a tech because of what the service manual said. I replaced it and its doing the samething. No picture but sound. All of the readings are coming out correct. I tried to do a reset on the logic but but nothing happens. I can do a reset on the main input board but nothing happens after it resets the TV. The fan on the main input board does not come on at all. Please help. I can control channel, source and volume but still no picture.


This no picture but sound issue is not caused due to power supply. The loic control board is also ruled out because all the other functions are operational. That leaves us with two possibilities 1) Sustain board(S) or 2)Buffer BoardsIt is not p ... Samsung HP-R5052 50 in. Plasma HDTV

When i hit the device button on remote nothing comes up on the screen the green light on front of tv starts blinking and the tv shuts off shortly there after . i tried the reset button on front of tv doesnt help


This is known as the bliking green light of death problem. Its common and fairly simple to fix. You can get the parts and instructons from sites such as www.TvRepairKits.com ... Mitsubishi WS-65809 65" Rear Projection Television

Sony kd-36xs955 Turn tv on all channels fuzzy,once warmed up,everything is good.Now when you try to use the hdmi port for PS3 nothing there.The tv has had problems before like it would shut off and blink red lights.It was difficult to get it to come back on.Now it doesn't shut off anymore, but the above described problem still exist. I don't mind the blurry channels,but it won't alow me to use my PS3 anymore? Please help don't want to get rid of tv?


Count how many times the standby light blinks at one time. These blinking are fault indication. You can get an idea about the faulty circuit part inside, from these number of blinks. After make it sure, if you wish to get more details about Blinki ... Sony FD Trinitron KD-36XS955 36" TV

Hi, i got samsung dlp tv m# HL-P5063W.i changed lamp,ballest,collerwheel,and lamp door cover sensor. but tv still doesnt come on.once you plug in the power cord green lamp sign blinks 35 times then cutts off and one time stand by red light blinks,then green lamp starts blinking again. lamp never gets come on. please help.


Seemed like it is a problem with the power supply circuit. Check the circuit where the power chord is connected internally to the TV. You should see capacitors. Check for swollen or leaking ones that may need replacing. Check also for burnt compo ... Flat Panel Televisions

Hallo, please help, i have a sanyo plasma screen pdp-42v1, it has failed to work, when i switch it on, the green light comes on, then the screen blinks some light and then it goes if and starts showing red light. When you try to press any other batton the red and green light come on in squence, what might be the problem


... Flat Panel Televisions

Hallo, please help, i have a sanyo plasma screen pdp-42v1, it has failed to work, when i switch it on, the green light comes on, then the screen blinks some light and then it goes if and starts showing red light. When you try to press any other batton the red and green light come on in squence, what might be the problem


... Flat Panel Televisions

I have a LG 32lf11 lcd tv. Within the last couple of months has started to blink on and off. Not lose power, but the picture will go out for a few seconds and then come back on. It is doing it more frequently now throughout the day and blinks has become longer. There's nothing in the manual about this so I am trying to find some answers, so any help would be appreciated.


... LG 32LF11 32 in HDTV TV

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po


Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help


Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


Hi,\012\012The\012Standby/Power light of the TV blinks when there is any internal malfunction in\012the TV. The self-diagnostic function of the TV will cause the STANDBY light to\012blink or flash when the television dete ... Sony FD Trinitron WEGA KV-32FS100 32" TV

Okay, well I have a JVC AV 32120 and it will run DVDs and all fine. That's great and all but when we plug the cable into the back and go to watch tv, we won't get anything coming through, just a blue screen. I've tried going into the menu and adding the channels individually, then the auto programing mode as well, I've gone as far as resetting all the v chip codes and still nothing! I'm desperate, please anyone?!


I would check and make sure you are connected properly in the back of the unit. Sometimes people put them in a little back ward and while they will allow you to watch a show they will not let the tv pass threw. the other would be making sure to selec ... JVC Standard (CRT) Televisions

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo light) come on, but no picture or sound. The red standby/timer light has been blinking now for four hours. The instruction book doesn't mention the standby/timer light. I have tried unplugging it and turning it off and on several times, but nothing helps. Still no picture or sound!


The tv has a high voltage problem, and the probable cause is the flyback transformer has become defective, it's job is to generate the high voltage to energize the picture tube and along with the video circuits produces a pi ... Sony FD Trinitron WEGA KV-36FS120 36" TV

I WANT TO KNOW WHATS GOING ON WITH MY TELEVISION. WHEN I TURNED IT ON NO PICTURES WILL SHOW ON SCREEN BUT THE SOUND COMES ON THOUGH. I TRIED TURNING IT ON AND OFF BUT NOTHING HAPPENS. I EVEN UNPLUGGED IT TO SEE IF IT WILL HELP BUT STILL THE SAME. THE POWER BUTTON ON TV KEEPS BLINKING NO MATTER WHAT. I JUST WANT TO KNOW WHAT I SHOULD DO?


You may need to replace the bulb ... JVC HD-56G787 Television

Brought a new jvc LT-32DA30J tv and for two days worked well. However I come home today and turned the tv on and it came up with a message in a box saying "no channels" found. So I tried to retune the tv still nothing, done first installation still nothing even moved the ariel to different positions and still nothing. Please can you advice me what to do


... Flat Panel Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

My Samsung ln46b650 screen goes off sound still on? tried hard reset, replacing PB nothing seems to fix it. Any help?


... Samsung LN46B650 46/49.5 in. LCD HDTV

I have lc-52se94u lcd tv.. Problm is only blue light blinking.. I reset the tv.. blue light blinking is stop.. But tv is stand by mode.. Only blue light is coming.. Tv is Stand mode. Inside the tv relay sound is coming.. No sound no pitcher.. Please help me..


... Flat Panel Televisions

Mitshubishi WD-62327 TV will not turn on and no sound. TV made a interference sound and shut off. Tried to turn it in the morning still nothing. Replaced lamp/bulb still nothing. Red light is on (not blinking) Need help any suggestions?


If you have a voltage meter there are some things you can check.Unplug the unit and remove the back cover of the set. Then Plug the unit back in.You will need to tape down the lamp safety switch in order to do these tests.Here are all the ... Mitsubishi WD-62327 62" Rear Projection HDTV-Ready Television

Plasma Panasonic I have a TV Panasonic model th-42pz8e bought 4 years ago. Everything went well until yesterday. When i tried to turn it on the red led start to blink 10 times then stop them start blinking again. Since that i could never turn on the TV. Could you please help me with a solution?


Replace the Power supply board very common issue with that chassis. ... Flat Panel Televisions

I have a Akai tablet when i try to switch it on the android robot comes on but just stands still and does not do anything els .. I have tryed to reset it meny times but still does the same ..can anyon


... Flat Panel Televisions

I havea Sony KV-40xbr800 screen won't turn on red light blinks 6 times, tried plugging directly into wall outlet & no picture still. Any help please ?


Power supply. Disassemble and be careful tv is not plugged in. Check capacitors on power supply for bulges on top. Replace but make sure u deenergize before removal by touching the two poles together. I use a small nail file ... Sony Kv-40xbr800 Fd Trinitronr Xbrr Wegatm Color Tv

My JVC model. my JVC TV LT 42 EM 59 will not come on .I get no blinking blue light no power no nothing I get nothing I've tried to reset it in nothing


With no power it will not reset---if total dead unit you would have to first follow the power cord into the set to the line fuse it goes almost directly to---check the fuse first and examine the power supply board for damage or puffed up filter caps. ... Flat Panel Televisions

Panasonic model PT-50LCX64A started shutting itself off a couple of weeks ago. Then a few days ago it wouldn't turn on. I have unplugged it for a few minutes and then bypassed the power bar straight to the wall and tryed it. Still nothing. It blinked green for about a minute then went to red. I read online that there is code for the number of red blinks but it appears to be blinking red continous. The TV is about three years old.


The first thing I would check would be the status of the lamp. Did you verify if its broke? ... Panasonic Flat Panel Televisions

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2057 seconds