Having problems with your Projection Televisions ?

TV turned off by itself one day. I pressed reset, timer light blinked green for a minute, then I pressed power and it sounded like it wanted to boot up, but nothing happened and the status light turn


\015 I tried unplugging and waiting a while, but same result. Tried pressing re-set and waiting a few minutes and powering on, but same result. Status light is solid red.\015

Answers :

Two thoughts:

First is this is a DLP set and the lamp may have failed

Second is it should have the self check which reads error codes---most of these sets that is the same:

" After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
(then release both)

The Power light will start to flash in a two digit sequence.
For example, 3 flashes, then 7 flashes = 37.
Here are the error codes, and the corresponding problem:
12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected
This is for a earlier Mitsubishi DLP but should be the same as your set as Mitsubishi rarely changes things like this.
If you get the lamp abnormal it is likely your problem.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TV turned off by itself one day. I pressed reset, timer light blinked green for a minute, then I pressed power and it sounded like it wanted to boot up, but nothing happened and the status light turn


Two thoughts:First is this is a DLP set and the lamp may have failedSecond is it should have the self check which reads error codes---most of these sets that is the same:" After you turn on the set, and get the regular red bli ... Mitsubishi WD-Y65 65" HDTV

I have a PALSONIC TFTV681U. When I turn it on I here a clicking sound it had the red light, so I press on and nothing happens. I turn off at the power then try again , I get the blue light . There for it should boot up . But no just a back screen and a clicking sound. Thanks


... Flat Panel Televisions

TV wants to turn on but can't. Green on-light goes on, then sounds like a relay clicks off and it tries a couple times, but nothing happens.


Check and replace the shorted component/s in its horizontal output section circuit. If you are not familiar with electronics, do not attempt to\012repair. Whether you suffer fatal electrical sho ... RCA 36V430T 36" TV

Dead tv Hi, I have a 50" samsung plasma tv that seems completely dead. 3 years old, the other day we heard a pop sound (sort of like the sound a lightbulb makes when broken) and then the power went off and never came back on. When you press the power button absolutely nothing happens, no sounds, no power light, just dead nothing. the model # is PN50A650TLFZC and the version is KX03. do you have any trouble shooting tips please? thank you


... Samsung PN50A650 49.96 in. Plasma HDTV

I have a panasonic TH-50px70a a and its lost power? when i turn the power on, the red standby light is showing but nothing happens on screen, when i press the remote power buttons. the green like flickers but nothing happens.


... Panasonic TH-50PX70 50 in. Plasma TV

Visio VP504 fhdtv10a - When I plug it in, it has an amber logo light and makes a click noise (like a relay). When I press the power button nothing happens.


These are problems gradually developed in TV over the years. You may have to look for any dry solder, change the capacitors that look 'puffy' and try. ... Flat Panel Televisions

Display Doesn't turn on anymore. When i connect it the blue led light on but nothing happens when press the power button, just start to blink the blue led and then stop. This happened after i notice some read dots and lines coming and going in the top half of the screen. Any idea of whats happening or a possible solution??? Its a samsung 42" plasmas with like 2.5 years.


... Samsung PS42P2S 42 in. Plasma Television

TV has power as red light on stripe comes on, I press the on button on the remote and the power in the TV makes the sound that its about to switch on then nothing happens, the light doesnt turn to blue. After approximately 30-60 seconds the red light appears again


Replace the power board. You can get the power board from www.tvcircuitboards.com they will aslo assist you with determining which one is the correct one for your model. ... LG 50PG6000 50 in. HD-Ready Plasma TV

Three days ago my sony TV (about 8 yrs old/HD tube type TV) would not come on. It made the sound like it would turn on, but nothing happened except the stand by light blinked 6 times. Today it turned


... Sony Standard (CRT) Televisions

I have a 42lg2000 , and all has bin good for 2 an a half years , went to switch on today and standby light now flashes twice before turning blue and have no picture or sound , blue light flashes when buttons are pressed on remote but nothing happens , please help :-)


... Flat Panel Televisions

When i turn on samsung model HL-5675s sounds like it wants to turn on but doesnt. i opend the back. and they light turns on for like 3 seconds. the fan turns on. but thats all . not sure what it could be? and befor that it got a white dot on the left side of the screen. also turnd off by its self that last week and when i turnd it back on it did but sounded like it struggeld to turn on.


... Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

The lights are flashing , tv acts like it wants to turn on but has no picture or sound. What would cause this to happen?


Power supply board is of course suspect number 1.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof da ... Sharp Flat Panel Televisions

I have a Hitachi 65f710 projection tv and is about 8 years old. We were watching it and it turned off on its own. When we try restarting it, it sounds like its going to turn on and then it sound like it shut off again. The screen remains black the whole time and no sound it heard. We did the whole unplug and replug again like the manuel states to do but nothing happened. What could it be?


... Projection Televisions

I have a Philips 42pf5321d/37 Plasma tv. When i turn i on the green light comes on in the bottom left corner but nothing happens. No picture no sound nothing. I opened the back of the tv. When i turn it on the led's light up but then it clicks and the two on the main board turn off. Any Ideas


... Philips 42PF5331 42 in. Plasma Television

After watching for about 10 to 20 minutes the tv does something weird like your'e pressing the input button. It keeps switching from tv to vidio or whatever else happens when you press the input button. When the screen keeps switching like that it just goes back and forth so your picture keeps coming on for a second and then back off. If you try to press the input button to fix it nothing happens. You just have to turn off your tv. It has its own dvd player on the bottom. I'm wondering if that


... Westinghouse 46W1HD 46 in. LCD TV

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

TV remote on my model TXL2791F won't turn TV on. When I press the power button on the TV itself the little timer light blinks and the TV makes a ticking sound for a few seconds. If I press the power button again the blinking light and ticking sound happen again for a few seconds. If I repeat pushing the power button on the TV again the blinking and ticking will then go on all day long unless I unplug the TV for 15 minutes or more. All during this time the screen is dark. Just before this ha


... Samsung TXL2791F 27" TV

When trying to turn it on the green light comes on the front, we hear a small zap sound, sounds like it is trying to come on and then the green light goes out... it will do this consecutively three times with one press of the power button. Then you have to wait 2-3 minutes before it will respond to the button press. We have done this for up to a half hour until the tv finally comes on. What is wrong?


Hello,This type of fault can be repair, it could be a short circuit on the panel power board, remove the back cover of the television in this you have to resolder the panel where you can find dry soldering, but if otherwise a common probl ... GE D52GW12 52" Rear Projection HDTV-Ready Television

I have a Sony KF 50 WE 610 projection screen TV. It has worked perfectly since I bought it six or seven years ago. This morning I turned it on and the sound came on for a second, but then the sound went off and nothing else happened for about one minute. At the one minute mark it turned off by itself and the red indicator light blinked 5 times in a row... paused... blinked 5 times in a row... paused... and then blinked 5 times in a row again. When I powered it up again, the indicator light blink


Hello\015\012Five consicutive blinks at a time and the stops and again blinks five; is its self diagonosis procedure. All modern Sony sets has this function included in its circuits. If the system control IC inside it detect any fatal fault ... Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself. when turn it on again, I can hear the fan is working, the power light is green, but it shuts off after a while.


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended. ... Mitsubishi WD-52631 52" Projection HDTV

47LG50 screen light goes black after about 45 minutes of being on, sound still ok. Turn the tv off and back on and its fine for another 45 mins to an hour. The on/off light goes from red to blue-ish when screen goes black. As a note I took out the power board adn checked the capacitors and none where bulging or burst (someone said maybe they are drying out)...does that sound like the problem of is this an inverter board issue. I just want to change the what might be the most likely issue


Good day!That problem is commonly happens when the inverter board failed.But before you replaced that its better to check this out first.Just follow this simple and D.I.Y procedure on troubleshooting. ... Flat Panel Televisions

TV has power but it won't turn on. Amber colored Vizio is lit up. Press the power on button and nothing happens. Seems like a power supply issue. What do you think?


... Vizio E421vl 42 Inch Class Lcd Hdtv

Visio VP504 fhdtv10a - amber light & clicking sound when I plug it in. Nothing happens when I hit the power button.


... Flat Panel Televisions

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

We have a LG TV #42PG60UD-AA We moved house and our tv won't turn on the wen we tryed to turn it back on the light turns green and nothing else happens no picture no sound nothing please help me someone.


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2033 seconds