Having problems with your Projection Televisions ?

My WD 73927 73 in. HDTV has flickering lights of color, mostly blue and green, on the screen. We have changed the bulb twice and the second time, the bulb did not solve the flickering lights.

Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My WD 73927 73 in. HDTV has flickering lights of color, mostly blue and green, on the screen. We have changed the bulb twice and the second time, the bulb did not solve the flickering lights.

... Mitsubishi WD-73927 73" HDTV

Panasonic hdtv 1080i viva bbe hd3d sound. I plug in powercord red light on standby botton I push power stew green light blink an changes to yellow while still blinking no light color for six seconds then blink red ten times changing to yellowblinking twice then repeat ten reds two yellow blinks over an over

... Projection Televisions

Panasonic hdtv 1080i viva bbe hd3d sound. I plug in powercord red light on standby botton I push power stew green light blink an changes to yellow while still blinking no light color for six seconds then blink red ten times changing to yellowblinking twice then repeat ten reds two yellow blinks over an over

... Projection Televisions

The picture flashed green to black several times and the image went askew. Then everything went black and stayed that way. Sound remained on. After a few minutes, I tried to turn the unit back on and it did the white up and down lights ending with the two top lights on (now red). I have changed bulbs twice before when this happened and that fixed it. This time it didn't. One new thing that happens now (I know this is weird) is that when I turn it on the set chirps in the vicinity of the bu

Hi lc99527,\015\012\015\012This is an indication of faulty ballast board and or its power supply(gone to out-of-regulation) and once sense by the feedback circuitry it will automatically shuts off the power supply. First check for bad solder jo ... LG 62SX4D 62" Television

Lg 52sx4d turned tv on-picture but no sound. shut tv off, unplugged for a few minutes, plugged back in and turned on-nothing. white lights scrolled bottom to top for a minute then top light went red and second light blinked red a few times. replaced bulb, nothing changed. no fan sound or clicking noises, just the light sequence.

Hello\015\012Power supply switching regulator board inside your LG TV is faulty. There are more than 8 regulated supply rails emerges from that board, after switching regulation, which will enter to different sections of circuits in your Tv. ... LG 52SX4D 52" HDTV

I have Philips 42pfl7409/98, When I connect power, white light goes on about 3 seconds change to red light, than 3 seconds goes off,about 3 seconds red light flash 4 times,what is wrong? Please help me!

... Flat Panel Televisions

My TV turns on shows picture but shortly later cuts off. During the time while its on I can change channel, inputs but I get no sound. I took panel apart and found a blown bulb. I changed the bulb and still the same issue. First I was getting 13 blinks and after replacing 1 bad bulb it only gives me 8 blinks. Please help me solve this issue and fix my TV.

Please tell me whats the make and model of the tv so that I can tell you what the 8 blinks error code means ... Flat Panel Televisions

Changed my bulb on my lcd tv like i did 3x before; and now the new bulb lights up; but shuts down after about 6 seconds and my green and red led light starts to blink. Defective bulb? please help

This definitely sounds like the bulb is defective. You may want to go back to the manufacturer or supplier. ... Samsung LE32R73BD 32 in. HD-Ready LCD Television

Replaced bulb in kdf-50e2000- when powered on green light flash 3 times & fan engages, 2 seconds later fan quits and i get a 3 red light blinks

Impossible to actually see if lever is Fully engaged---with door off try to engage with a match stick or something not metal--see if set comes on that way. ... Projection Televisions

TV will not turn on. There are two lights in front at the bottom of the screen - One is the power light, one is the OPC light. When the power cord is plugged in, both lights flash twice, then the OPC light flashes 3 times - Some sort of error code? The power light then comes on for about 20 seconds, and then cycles back to the flashing light routine.

Sounds like your screen is broken or has been impacted. Force the television on by doing this: Unplug it and on the side of the television where the panel buttons are hold down the ch- and vol+ buttons. Then plug in the television while still holding ... Sharp LC46SB54U 46 in. LCD TV

My Sharp Aquos TV went off whilst we were watching it and won't come back on. The red power light flashes twice per second and the green OCD light flashes three times every second. Is there a re

Tries tv unplug replug the tv back about an hour later,might resetting the tv back factory setting and should work again.Still have the problems,the main board it is shorted and dead require changing.The main board that board were the incoming broa ... Sharp Aquos Flat Panel Televisions

LC-45GD4U Hi, my tv powers on showing the blue light which flashes for 4 seconds then turns off its followed by the red light which starts blinking for 2 seconds pauses and then repeats. I already changed the t-con board, what other options should I try to solve this issue??

I'm believe the 2 flashing code specifies a problem with the power supply. It is possible that one or more of your supply voltages is out of wack. Have the power supply tested. ... Sharp AQUOS LC-45D40U 45 in. LCD Television

I have a Runco RS 900 projector that will run for a few minutes and then the bulb light turns red and the video goes dark. It does not do this every time, but most of the time. It will sometimes go a couple of weeks functioning properly and then do it again. We have replaced the bulb twice and it still happens. Does anyone know what this might be?

... Flat Panel Televisions

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.

Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

TV: Aquos SHARP LC-42BT10U When you plug the unit in, the power light comes on. After a few seconds, you then hear a click. Next, the power and the OCR lights blink simultaneously twice and then the OCR light blinks 3 times. When I put the TV in service mode, The screen gives me a small multi colored band from left to right that will fade after a few minutes. If I turn off the TV and put it back into service mode again, the color band moves to a different place. I am trying to fi

... Sharp LC-42D72U Television

I have a LG 42PG6010 that will not let me change inputs, also when swithed on the green power light flashes 5 times before set comes on to digital tv. It will not change to Sky when box switched on and as stated I can not change through the AV input button although the graphic comes on screen allowing me to select AV1 (sky input) but on presing OK it freezes on screen, I then have to switch off and back on again. the other thing is it takes 20/25 seconds to switch off.

... LG 42PG60 42 in. HD-Ready Plasma TV

RCA HD50LPW Projection DLP TV. Replaced bulb, still no picture. Has sound and after startup, the green light on the on/off button will blink 5 times every 15 seconds or so.

... Projection Televisions

Good afternoon, Sirs! I bought an LCD TV Sony KLV-32S200A four years ago. Yesterday the TV didn't turn on. The standby light blinks 5 times and pauses for 2-3 seconds, then blinks 5 times again. Could you please let me know what the problem is and whether it is possible to solve the problem without fixing. Thanks for your help in advance!!!

Hello\015\012Blinking of standby light is Sony TVs are fault indication. Five blinks denotes \015\012AKB circuit (AKB), the timer/standby indicator blinks for about\015\01230 seconds then goes to the self-diagnosis function. ... Sony KLV32S200 Television

Have bright white spots starting to appear on a 3 year old RCA DLP. Model M50WH92S. Made by TTE. It's not the bulb, as I just changed that (for a second time) about 3 months ago. I have no idea if it could be dust on the mirrors of something like that? I spent time with both "Level 1" and "Level 2" support with TTE, and got nowhere fast (other than a lesson in never buying an RCA product again!). Any advice?

... RCA Projection Televisions

Good afternoon, I have a Sony TV KDF-LSD E50A11E overhead projector, a few months now I've changed the bulb and turn on the TV and some time it turns itself off and the red light blinks 2 times, after a few minutes and switch back on when the image appears again off and only last one hour it is back to work, have already taken a technician and continues in the same Someone help me please My email is [email protected] Thank you very much Lurdes

It could be a cooling fan or power supply problem or a switch on the saftey inter;lock on the lamp door \015\012it will require some trouble shooting if your having problems finding some one in your area contact sony for a referal to a ... Sony KDF-E50A11E TV

I have a Sony Bravia KDF-50E2010 and after changing the lamp the TV stopped working. As i turn the power on the green light comes up for 2 or 3 seconds and changes to the stand by red light. Flashes t

... Projection Televisions

My samsung hl56a650c1fxza does try to turn on and just recently changed the lamp bulb it is flashing one red and two green lights at the same time

It sounds that the lamp inverter board has damaged. Replace it. ... Samsung HL56A650 56 in. TV

I have a samsung hlp5085w with a light bulb symbol, my question is what else i have to change, i already replace the light bulb which was blown, i replace a color wheel too and still got the light bul

... Samsung HLP5085W 50" Rear Projection HDTV-Ready Television

I have an LG tv/monitor which i use as my pc monitor for some reason the blue on light will flicker then the screen goes black for roughly 6 seconds why does this happen? and how can i solve my problem?

I'm not ENTIRELY sure, but it could be simply a problem with your display drivers. Since it is a TV, some older drivers won't recognize it properly; and for that matter some TVs simply aren't made to work with computers. I'd suggest updating your dri ... Flat Panel Televisions

My vizio internet apps tv .When turned on it blinks the VIZIO light word for about then shows internet apps logo then turns off after a bit. I have tried unpluging it for 30 seconds like the mauall says but no change. It will not respond when the input or power buttons are pressed on the side of the TV. During this time. It will then power off, and power back on, on its own, but continues with the same issue. Is there a solution for this?

I Am having the same issue did u find a fix ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1995 seconds