The problem may be with the color oscillator of the circuit. Check first for swollen or leaking capacitors. Capacitors are cylindrical in shape and is black in color (color may vary) and has two legs soldered to the board. It may also be a faulty board based on the number of items damaged. You would have to need special tools to have this fixed or replace the board depending on the practicality.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
HDMI Inputs don't work (and I've tested my components with another TV). When viewing on Component 1 input, the picture has blotchy color, like water colors. Adjusting color and brightness doesn't help. The tint control has no effect, and in fact, the tint slide looks funny on screen. The audio control no longer allows selection of the A/V external. The only setting it allows now is TV. Reset does not change the symptoms.
Hi,\015\012\015\012First lets re-initialize the AV Memories by following the steps below.\015\012\015\012Press the front panel "Guide" and "Format" key at the same time.\015\012\015\012Wait until the unit reboot and then try if the ...
Mitsubishi WD-57733 57" HDTV
Screen looks green and there is no possibility to adjust color with the manual control. Tried changing Iris but to no avail . The screen was showing a blue " stain " but still the colors were acceptable before it went green screen. Screen flickers and red color tries to enter but it flickers again and goes green
Hello docstove!\015\012looks like it has some cooling liquid problem, please contact service for repair.\015\012regards ...
Sony KDFE50A10 50" HDTV
Color changing The colors on my screen keep rotating. It started faintly at first, and has slowly gotten worse. It's like the tint is going haywire, red, green, and blue all rotating and becoming more noticeable. What could the problem be? I'm looking for solutions before I blow money unnecessarily.
Youve most likely got an issue with the CRTs one most likely which cuts out and back in randomly. Try removing the rear cover and look in at the three crts while its doing that and see if you can see one or more keep turning off and on. ...
JVC AV-56P575 56" Rear Projection HDTV-Ready Television
I have had this TV 6 months. Got it from a friend. The set worked perfectly in my house for 3 months. The color seems to have suddenly changed giving a gold tint to all cable channels, dvd's etc. I have reset the colors factory setting, adjusted the 6 tints, auto color balance, and everything having to do with color. Can't seem to get a true or close to RED color and facial tones have a yellowish tint at all settings. I have the owners manual and the service manual (but have not opened the box)
I don't want to seem condescending in anyway but i would try checking all your cables to see if they are plugged in properly and if that doesn't help id suggest buying new cables and testing those to see if your old ones have died out. If it isn't th ...
Mitsubishi WS-55411 55" Rear Projection Television
Have a hl61a750a1fxzc(model) tv, tv is about 5 years old. Tv has a greenish picture tint... Looking at http://ww2.justanswer.com/uploads/TVTech1/2010-07-02_101408_SMPTE_Color_bar.jpg top 7 colors on my tv appear as follow from left to right... grey, light grey?, blue, same color blue, red, same red and black. Am I missing a color or 2? I am also getting a red tint flicker on and off
Please do this test: God bless you\012\012Reset component settings.\012 Usually, the problems you encounter with a projection TV may be resolved\012 through the resetting to its factory settings. If y ...
Samsung Hl61a750 61" LED Powered DLP HDTV
Input Control Button at Main Power control Panel(near bottom right edge of Unit) has "fallen" into the exterior mounting plate, making it impossible to change Input choice. One Phillips head screw is directly right of this control module.with screw removed, the control module is still immoveable. Is there a "pop-lock" or process that would allow for access to this control module and the possible repair of this problem?
Hitachi UltraVision 55HDS52 Television
I own a Sony Plasma model KDL-40SL140. Yesterday, without any apparent cause, the colors went wierd. Image looks almost like a negative with very bright colors. I turned the TV off and on and played with the color control. It did not work. Please help.
Sony FWD-50PX1 50 in. HD-Ready Plasma Television
I cannot access the "Tint" on the menu screen and therefore the colour is not working - I have looked at the set with color off to zero and still cannot cursor to the tint screen - what can I do - TV is only 2 years old
Seiki SC221FS 22 Class LCD HDTV
I did not receive a remote control with my NS-LCD32. Problem is we cannot turn off closed captioning. I realize their is a menu I can access on the side of the TV, however there is no option to turn OFF closed captioning. I have option to change how closed captioning looks with the menu and I have tried to do that but it always just looks the same. I really just want to turn CC off completely. Also the HDMI ports don't work at all... but I think we may have to live with that. Thanks in
Well you have several options.\015\012\015\012You can order a new factory replacement remote control for your set as shown at the following link:\015\012\015\012 ...
Insignia IS-LCDTV32 32 in. Television
I have problems with my picture. It looks zoomed in and is very poor. The picture looks like it changes colors and has shadows throughout the picture. Whats wrong with it. Is it a DMD board, DMD chip or is it the main input board. Please help..
Before I can suggest anything its best if you can get me an image of the screen with the tv on so that I can see for myself. ...
Samsung HL-S5679W 56" HDTV
I have a Mitsubishi WD65638, the lamp went out and I replaced it. Now, after about 5 minutes the colors start changing and the picture looks a bit digital. I cleaned the colors wheel, and all the fans
Is there something that I can do to stop the color on my tv channels from turning red. everything on the screen is starting to look red. I went in the settings to brighten the channel but It seems like the color is still changing.
Sanyo HT32546A 32 in. Television
Green tint I turned my tv on today and it has a greenish tint to it. All channels and on the PS3 so its definitely the tv. I tried magic focus and messing with color adjustments but it doesn't change. any ideas? Thank you
Go to a channel that is in black and white and turn color all the way off.Screen should be a black and white or gray color.If green there is a fairly easy way to adjust--let me know what you find and I will tell you how to attempt the ...
Hitachi 57S700 57" Rear Projection HDTV
I have just replaced the lamp on my hitachi 50V715 rear projection tv. Now there is very little color. I have made adjustments to the color, tint, brightness, etc... With no change. What should I try
It may be the Lamp engine. ...
Hitachi 50V715 50" Rear Projection HDTV-Ready Television
I have an old zenith tv set that i bought from a local motel(model # H27C35DT). I want to change the default channel that the tv comes on whenever I turn the tv on. Currently, it is set to come on channel 54 everytime i turn the tv on.
I have looked at all the available options in the menu using the master remote but I can not find anyoption that will allow me to change the defaul channel number when the tv is turned on.
Flat Panel Televisions
We have a vizio hdtv vp42 plasma screen all of a sudden last night entire screen became dull colors are blurred picture is not sharp at all seems like all faded and we are looking through oil. we tried leaving off all day then reseting color settings but nothing has changed??? help
Vizio P2 42 in. HD-Ready Plasma Television
I have Aiwa TV MODEL No. TV-A209
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.
Its stuck randomly on a particular channel that I was watching at that point of time.
Along with that channel it now shows a message in flashing red color that reads :-
Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
000 001 1
Flat Panel Televisions
I have a JVC model AV27320 standard TV. The picture is dark and the tint is off. The colors you can see are blue and red. Tried adjusting tint and brightness from the menu and no significant change. Not sure what problem is, please advise>
It is one of two things the picture tube is bad and the green emission is very low or the green gun is open, the second possibility is the video driver or output is shorted on the video board "plugged in the back of the picture tube" ...
JVC Standard (CRT) Televisions
I just purchased a Sanyo Hdtv Lcd and the picture quality if off the picture seems to come out greyish or pale....i'm not getting a true color. Is there some adjustments that I should know about? I tried the color and tint adjustments and it's still greyish looking.
Check hookup connections. If you are using the component input (3 wire video green ,blue and red). Be sure both ends are in the correct colors. if switched or not all 3 connected color will be off. Composite video uses only 1 wire ,yellow. See own ...
Flat Panel Televisions
I have a brand new remote control, and new batteries! Still unable to get the remote control to operate tv. The tv is shows a small square box that contains the letters (LOCK)! My model of television is a Insignia Color TV; NS-20LCD! My satelite remote turns the tv on, but will not change the channels, or show picture! How can I fix this problem?
Press "0000" on remote ...
Insignia Flat Panel Televisions
Mitsubishi ck3560r manufactured 1988. color seems to be fine but there is an overall green malaze(tint) to the picture. this cannot be adjusted out with the tint control which functions properly.
Hi there. Your problem seems to be the lamp. Try replacing it and see if the picture improves. ...
Flat Panel Televisions
My screen is tinted red and the picture is very dim. The menu of colors says that it's balanced. I tried increasing and decreasing the color and brightness but it didn't change. Please tell me what to do. I did have the TV fixed last year due to the picture shrinking, disappearing and coming back and ended up with a great picture but now it's doing something else. What should I do?
A common problem on these sets you will need to have or do the liquid kits in each tube most commonly blue and green but while there do the red it will look better \012or contact a local servicer about a est for doing so average cost to do th ...
Philips Magnavox 9P6034C 60" Rear Projection Television
Ok!! I have a panasonic viera th42pa25 .when I turn it on it starts looking well for a few minutes and then it starts to blink and the image changes color .it looks kind of red .it tries to come back
Panasonic Viera TH-42PZ80U Plasma TV