Having problems with your Projection Televisions ?

TV was working fine. Plays DVD's fine. Can't find HDMI from the cable, hence to TV reception. TV set works fine however on DVD's so it is not the set itself. Can't find the HDMI 1 hook up only the HDMI 2 for the DVD.



Answers :

Tries tv and cable or satalite boxes unplug,replug it back for like about an hour later.By letting tv resetting itself back to the factory setting and those pay boxes upgrading it softwares.The tv HDMI signal for the tv incomming broadcasting signal should be back,if not, tv might have a dead HDMI cable or that the HDMI 1 hub it plug in is shorted and dead.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TV was working fine. Plays DVD's fine. Can't find HDMI from the cable, hence to TV reception. TV set works fine however on DVD's so it is not the set itself. Can't find the HDMI 1 hook up only the HDMI 2 for the DVD.


Tries tv and cable or satalite boxes unplug,replug it back for like about an hour later.By letting tv resetting itself back to the factory setting and those pay boxes upgrading it softwares.The tv HDMI signal for the tv incomming broadcasting signal ... Mitsubishi WD-57733 57" HDTV

I have a Fischer DVD player which now gives a NO PLAY message when I insert any DVD. It will, however, play an audio CD. This includes DVDs that at one time played just fine. It seems to me that there must be a configuration setting that has been set wrong, but I can't find what it could be.


Hi,\012\012how long have you been using this player? I suspect the laser (lens) of \012the player. I think the laser (lens) is weak that's why it cannot read \012data/files on DVD discs.\012\012To confirm if ... Flat Panel Televisions

Just bought an rca 3210 tv. All hooked, was working fine, however now I have the following problems. -can no longer get a dvd picture playing-wont allow me to set up the tv (antenna, etc), only allows sound/picture/and set up-does not allow me to get into the tv or pc modes.


... RCA Flat Panel Televisions

I have had this model for over three years without any trouble. I recently added an LG Blu-ray player via HDMI connection. AlI seemed well for a couple of weeks, then one evening while watching a DVD the screen displayed multi colour narrow vertical pinstripes. I turned the television off and on and all seemed well. The next day when I turned the television on the same problem occured, now the set just just starts with this problem and the screen fades to a dark colour. The audio is fine


Hi William,\015\012\015\012Vertical colored lines is very common problem in plasma tv. Plasma is the most hard working type of tv nowadays and most of them encountered problem after 3 years of service which is caused by overheating of the board ... Flat Panel Televisions

When I view the tv over the cable the picture has a green tint, I can't get any true reds or proper flesh tones; however when I play a dvd the picture is fine. I've tried to correct the problem using the picture settings but can't get the color right when watching cable. What can I do?


Check the connection of your cable wire and the plug. It seems that you have a loose/bad connection either on the cable box or from the cable wire itself. First you have to confirm a good signal from your cable provider.\012Thanks for using fixya. ... Sony KDF46E2000 46" Projection HDTV

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b


... Pioneer Flat Panel Televisions

I have a JVC model AV - 48P776 and i cant find the HDMI channel. i try to connect my PS3 to the HDMI but cant find the channel. the only channels are: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, and DIGITAL OUT. and believe me i have checked every channel. (VCR, DVD, GAME, etc) and still no HDMI. please help i really want HDMI


... JVC AV48P776 48" CRT TV

Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.


Check the connection wire for any internal conductor break. Check it with a multimeter. ... Sceptre X400BV-FHD 40 in. LCD TV

Suddenly my HMDI connection soes not work? Tested cables and they are fine. Component signal from DVD is fine. Imputs are fine- Tested other DVD player and it also no signal- I have two HDMI ports and neither worked. What is up? What can I do?


... Panasonic TCP42C1 Plasma TV

Panasonic Viera 1080P Plasma TC-P50S2 - Error Message: DIAGNOSTIC, HDCP Authorization Failure HDMI Port Disabled - All HDMI ports not functioning, tried different HDMI cables with no luck. Set works fine using jacks from cable box to set.


... Panasonic TCP50S2 50 in. TV

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

Up until yesterday our dvd player was fine, today I put in a dvd and there is no sound. I have put a couple of dvds in and there is no sound except for one dvd I put in this works fine?


The dvds you put in are not compatible to your dvd player.but you can clean the lens and see what it does.good luck.dvds work with region.check the region of your dvd player and dvd you are attempting to play. ... Flat Panel Televisions

Connected a laptop to my TV with an HDMI cable. Everything works fine except I'm limited to listening through the TV speakers. I'd like to find a way to listen to multimedia from my laptop thr


Without an hdmi compatible external sound system that's all you can do. ... Panasonic TH-42PX75U 42 in. Plasma Television

My WD-60735 doesn't recognize my xbox 360 in HDMI or AV. DVD player works fine in AV, Xbox works fine in HDMI and AV on another tv. Just goes to blue screen on this tv.


Have you set your settings for 720p on your xbox then turn the tv on to the right input then turn the xbox on? i had that issue with a previous tv? does the lights on your xbox just spin around? ... Mitsubishi WD-60735 Projection Television

Philips dvd player dzp3962; when certain dvds are put in, dipslays 'enter password' - in settings, parental controls are set all the way to adult, and option for 'dvd lock' is not able to be clicked


Here's what I found for you--a user on Yahoo 'answers' seems to have 'yours':\012\012http://answers.yahoo.com/question/index?qid=2010041410592 ... Flat Panel Televisions

Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her. It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow. Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing. Brought in my old tv and hooked to Dish thou


If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if t ... LG 47LD520 47 in. HD-Ready LCD TV

I tried connecting my samsung dvd it has ntsc settings when i set it that it work very fine but when the dvd to pal it show black & white why


If you don't know what PAL and NTSC signals are I would do some reading. It will explain what is happening. You can't use a ntsc device and set it to PAL. It doesn't work like that. ... Philips 27PS55S 27" TV

HDMI #2 flickers with PC connected to. Switched to HDMI 3 and works fine. I connected my DVD to #2 and still flickers


... Sony Flat Panel Televisions

Issues with LG 26LE5300 26 in HDTV LCD TV Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3. I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,


I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ... LG 26LE5300 26 in. LCD HDTV

The set plays dvds fine but not satelite signal.


... Sony KDS-R50XBR1 50" HDTV

I have a thomson dti 6300-16 set top recorder box. i live in derby and have experienced the digital switch over. my tv after rescanning is perfectly fine, with no loss of service or channels. however my set top box has failed for the last 48hrs. i have rebboted several times and completed auto scans. everything works and i can watch all the channels through my set top box on my tv, my pre recorded programmes are still successfully there and working. but no information on the channels appear now


... Thomson Flat Panel Televisions

Rca truflat guide plus gold gemstar tv problems with built in dvd player tv works perfect but dosent play dvds or rad any dvds i have region 1 and the tv is set to read region dvds what do i do ?


Visit the site named 'Electro-help' for\012more details. Check this ... RCA TruFlat 27F520T 27" TV

After 5 yrs.of excellent performance, my Toshiba 27AF45 no longer receives a signal through the Comcast Motorola DVR when I use the TV/Video button on the Toshiba remote control (CT-847) to switch between Video1, Video2 and Video3. However, it plays DVD's on the ColorStream setting and shows up to 81 channels on the TV (non-cable antenna) setting. This problem started several days ago after some power outages in my home. At first, the three cable settings (Video1, 2, and 3) started going out int


Hi,Do you get sound in Video-1, 2 and 3 while tv does not show picture in these inputs?Does tv show input display on its screen and it gets change when you select next input?I do have service manual/ schematics of this tv that has a ... Toshiba 27AF45 27" TV

Problem with DVD Players i have connected my dvd player to my tv correctly, but when i press play there is no picture on tv i have tried searching all the set up buttons but i am unable to find a channel which is playing the dvd


If it is connected to the side AV jacks it will not be on a "channel" but on the input it is connected to. ... Flat Panel Televisions

How can I change the subtitle settings on the TV? They set fine through the DVD settings but then don't appear on the TV screen. Thanks for your help.


Hi Wendy,\015\012\015\012May I know what cord are you using to connect your DVD player to the TV, is it through the HDMI or RCA? Let me know to assist you further.\015\012\015\012Jdvillanueva ... Sharp LC19DV27UT 18.5 in. LCD TV/DVD Combo

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1119 seconds