Having problems with your Projection Televisions ?

Can not get it to add any channels to memory.Someone started playing with the buttons and I haven't been able to get tv channels for over a month. Don't know what the original settings were.



Answers :

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Can not get it to add any channels to memory.Someone started playing with the buttons and I haven't been able to get tv channels for over a month. Don't know what the original settings were.


... Mitsubishi VS-60703 60" Rear Projection Television

Hisense HL81V88 Have just disconnected my Austar Box and plugged in for normal TV. Have auto tuned the Tv several times however channels not being picked up. Have checked to ensure antenna coax connections are correctly installed. Have now reset to factory settings. have auto tuned again and still no result. Thought it maybe related to the system setting needing to be set for Australia BG however dont know how to bring this screen up to check this. Cannot bring the TV back to original first time


... Flat Panel Televisions

Memorex mt2024 bought used w/o remote. Need to reset back to original settings. There is a parental control on a couple of channels and I don't know the password. Here's the BIG ISSUE, though: I have hooked up 3 different DVD players and EACH time get VIDEO/DVD CHANNEL LOCK message. Is there a way to bypass this w/o a remote?


To unlock all its locked functions, you must have its original remote control A universal remote control won't go. Try to get its original one. Don't waste more money by buying a universal remote control. ... Standard (CRT) Televisions

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

I recently moved and had my jvc big screen tv hooked up to direct tv through a hdmi cable i get picture but no sound I had this problem before when i had it hooked up the first time the direct tv guy messed with th tv settings and got it to work but i dont know how he did it and now ive moved and am having the sound issue again how can i get the sound to work on hdmi it works on everyother input channel


... JVC HD-52Z575 52" Rear Projection HDTV-Ready Television

Some of the channels are in spanish now like disney channel. There is also a voice on every channel that says everything that everyone is doing and I dont know how to get rid of that. It all started w


... GE 32GT740 32" TV

Some of the channels are in spanish now like disney channel. There is also a voice on every channel that says everything that everyone is doing and I dont know how to get rid of that. It all started w


Check with your provider 'cable' to see if they made a change in your service. ... GE 32GT740 32" TV

WILL A RCA UNIVERSAL REMOTE PROGRAM MY PHILIPS HDTV CAUSE I'VE TRIED AND IT WILL ONLY GET ONE CHANNEL, WILL I NEED TO GET AN ORIGINAL GUEST REMOTE RC2888/01 WHICH IS THE ORIGINAL! I HOPE SOMEONE WILL LET ME KNOW,AND IF YOU KNOW WHERE I CAN PURCHASE THE ORIGINAL PLEASE DO LET ME KNOW, I WOULD GREATLY APPRECIATE IT SO MUCH! THANKS


Http://cgi.ebay.com.sg/Philips-LCD-TV-Remote-Control-Model-RC2888-01-HDTV-/220487879208\012\012 ... Quasar SP-2723 27" TV

Hello, I have an old Sony Trinitron KV25XS DC. It is without remoter now and I don't know how to tune the channels. I was able to scan the bandwidth and select the channel I wanted, I can even change the number of the channel on which I want it to be but then I don't know how to set it. How can I set a channel on a specific number?? What is the button for this? A combination of buttons? Thanks. Fra


... Flat Panel Televisions

I do not have cable or anything. I need to know what I need to get to get my local channels on my Vizio flat screen. I tried hooking up an antenna but I do a scan and get nothing. I dont know hat to do, Im tired of watching netflix.


... Vizio M220VA 22 in. LCD HDTV

Im trying to set up tv.when i run channel set up it says no channels found.im using rabbit ears.i was given this tv so i know nothing abt it.when i type in a channel, i only get snow


Are you in the US? If so, you'll need a digital converter between the Television and the rabbit ears/antenna ... RCA G35831AT 35" TV

I have had this TV 6 months. Got it from a friend. The set worked perfectly in my house for 3 months. The color seems to have suddenly changed giving a gold tint to all cable channels, dvd's etc. I have reset the colors factory setting, adjusted the 6 tints, auto color balance, and everything having to do with color. Can't seem to get a true or close to RED color and facial tones have a yellowish tint at all settings. I have the owners manual and the service manual (but have not opened the box)


I don't want to seem condescending in anyway but i would try checking all your cables to see if they are plugged in properly and if that doesn't help id suggest buying new cables and testing those to see if your old ones have died out. If it isn't th ... Mitsubishi WS-55411 55" Rear Projection Television

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

Hello, my mother has an old Orion TV set (model P2135MT) and we lost the user manual. I'm trying to do a manual channel search, because the automated one does not get all channels (there are over 100 channels provided by the cable company and the auto search gives me the first 100). However, I seem not to be able to do manual search. Is this the truth? Many thanks.


Hello\015\012Hello\015\012Search in Google for:\015\012\015\012www.eserviceinfo.com/index.php?what=search2...orion+p21 ... Standard (CRT) Televisions

I have a Curtis Mathes Tronics TV model CM 19022s and my volume is set to very loud. I do not know how to fix this. I was flipping through the channels last night and it the tv switched to ant stereo in french. The setting was originally set for English. The volume scroll line will appear on the screen going up and down, but the volume never changes. It is stuck on loud. Please help.


... Flat Panel Televisions

LG 42PQ3000 Having problem with the key lock, cant get it off, how do i get it off ? ive have sky plus hd and i have been useing the the remote to change the channel on my tv a dont know if that has trigged the lock key on or not ? Can you help me get the key lock off. And ever since the key lock has went on my television screen has split in to 2 1side is XD On and XD Off what do i do please help me


... LG 42PQ3000 42" HDTV Plasma TV

Need to know how to set the channels on tv to a 13 inch memorex I only get channel 1 thru 13


... Memorex Portable Televisions

We dont have a manual and we dont know how to change the channel or set the time


To set the clock on the unit, have the TV connected to power but not on. Then press and hold Mem/Clck Adj on the TV (it's the third button from the right in the top row of controls). Use the adjacent Tune/Clk (up/down arrows) to set the clock for 12 ... GPX KL858S 8.1 in. Under Cabinet TV

My Zenith tv rarely turns on clicks and goes to standby and im not sure what its call but a yellow transformer on the power board make a squealing nose for like 5 seconds after it goes to standby. No Capacitors are swollen and after i used the auto convergence it turned its self off and i haven't been able to get it to turn on since even if i can get a new power board i dont know where to look?


To find a new power supply board all you need to do is search on Ebay or Google etc with your model number. Also try shopjimmy.com ... Zenith Projection Televisions

Friend gave me a tv can only get one channel went to run channels and it shows its lock dont know codes they forgot


... JVC AV-32F476 32 in. Television

I have a sony trinitron KD26FS130 do i need a digital converter box or is it built in..i can not figure out how to get the digital channels set on my tv


... Sony FD Trinitron WEGA KV-32FS120 32" TV

Blue screen need to know how to scan channels to get input to come back up


Will need to know what tv you have, but you are right it is probably your input button. if you pushed it on your remote then there should be an input button on remote. otherwise you will have to go into the tv menu and setup it up there.if you re ... Polaroid Flat Panel Televisions

My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur


... Philips 50PF7320A 50 in. Plasma HDTV

Hello, I have a Panasonic DMP BD 601 Bluray player with Viera Cast. I can't get it to connect to the internet although the cables seem to be set up correctly. I also want to know if, once connected, it will be able to connect and stream movies from Netflix (which is the reason I want to connect the player to the internet); I have read elsewhere that this particular player doesn't support streaming movies on Netflix. Thank you very much in advance for any help you can give me, Marc


... Panasonic Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2220 seconds