Having problems with your Flat Panel Televisions ?

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The TV doesn't power up anymore - i've checked the cord connection, made sure the power switch is in the "on" position, etc. basically ran through all the possible troubleshooting solutions. the little amber power indicator doesn't even light up anymore so it seems there no power registering into the unit at all (i've checked the outlet too). any suggestions?


... Maxent MX-26X3 Television

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

LG 47'' LED. Model No. 47LE5310. Tv was working fine in the morning, was on for a couple of hours. went to turn it on later in the afternoon, but something is not right. there is power going to the tv. the power indicator light is on, but there is no picture or sound, just a black screen. tried using another power point, checked all cables and everything seems fine. Tv is about on month old. Any help will be greatly appreciated.


Just look to the picturebored sounding IC ... Flat Panel Televisions

Screen flickers The screen flickers kind of like a strobe light every once in a while then goes back to normal. I checked and all connections seem ok. Changing channels and powering off/on doesnt help. Any idea what it could be?


"once in a while" suggests its not going to be found until it gets more frequent. A number of possible reasons for this as it is a bit vague. ... Samsung LN55B650 55 in. LCD HDTV

I have the Philips 55PL9223 Projection TV. The TV is turning itself off intermittently. Checked airflow filters and dusted internal components. Red light comes on after a few minutes of play and TV then simply powers off. There are no blinking indicators during power off. Can restart TV, but will power off again after a few minutes.......Please help!!!!


Deffo sounds like its overheating, check the power supply capacitors for bulging etc ... Philips 55PL9223 55" Rear Projection HDTV-Ready Television

Sansui SV-3715LCD, I switch off the unit at the wall socket, when I plugged it in the next day there was no power, not even the LED indicator light on the front of the LCD activates. I checked the plug power and it has AC supply voltage right up onto the internal Switch-mode power supply board. Any suggestions


Continue to check--every set has a standby power supply that powers the remote circuit to turn set on and it runs 7/24 if set is plugged in.Never a good idea to turn set of by taking the AC away--it can cause micro problems(micro processor). ... Flat Panel Televisions

My 32lg20 television will not power up. No power indicator light comes on at all. I removed the back cover and checked the fuse on the power supply board, but it is OK. What should I do next?


... LG Flat Panel Televisions

My 42inch rca scenium tv cuts on and the little light at the bottom is green then it cuts right back off and the light at the bottom blinks five times ive already checked the power cord and thats not


... RCA Scenium HDLP61W151 61 in. HD-Ready Television

My LTV-32w6 westinghouse powers on & has sound but displays black screen with very faint colored vertical lines. It shows like this for about 1min before it goes into standby mode & the blue power indicator light turns yellow. Ive alread bought & replaced the inverter board. Still doing samething. Suggestions anyone please?


Depends on what is causing it...Vertical bands of faint black are generally caused by filtering capacitors and can be found in the power supply or the 5 volt supply or even the Video processing circuit...it is not an easy task to ... Westinghouse Flat Panel Televisions

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

Ive had this tv for a couple of years now and its worked fine up until now, the red light comes on to show there is power but when i try to turn it on, the green light doesnt come on and it shows no sign of actually turning on.


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Hitachi Flat Panel Televisions

I have a TH50PX60U with the red light flashing 10 times. I went through the diagnostic flow chart to where it said replace the PA and DG boards. I replaced both and still have the 10 flashing lights. SInce that flow chart didn't seem to work I started checking the feeds from the power supply. I noticed on the PA10 that as soon as I plugged in the AC, the voltage read 15V. Then the voltage started dropping fast and went down to zero. Is this normal or should the voltage remain at a cons


... Panasonic TH-50PX60U 50 in. Plasma HDTV

I have an onn tv (3yrs old) and it was Working fine until tonight I went to put it on and the light on the front is just flashing. I have checked all cables and the fuse and they all seem fine. No power is going through apart from the light flashing any ideas? Thanks


What is the Brand name and model number to your TV? Anyway For more details type in this site name "Electro-help"\012either to Google or Yahoo search box [not\012in the address bar ... Standard (CRT) Televisions

Ive just got home to find my lg 42pg6010-ze tv will not power on. there is no stand by light, I have checked power connections and tried changing fuse. any ideas? manufactured 2008


Try a different outlet. \015\012\015\012If that still isnt the case then it could be the power supply went on it.. ... LG 42PG60 42 in. HD-Ready Plasma TV

Plasma My tv will not turn on. When I push the power button the indicator light turns green and then back to red. It was going on if you pushed the power button a few times, it would eventually stay on but it's not even doing that anymore. Any ideas?


I would check for swollen capacitors on your power supply. If this is the case let me know. Can be a very easy and cheap fix. If you don't feel up to it, then just change the power supply, but that is pricey. ... Zenith Z50P3 50 in. Plasma TV

LG 42PX4MVH remote control does not operate the TV, it seems that it needs to be re-synchronised, how do I do it? The batteries was replaced yesterday and the lights on the remote control flashes and indicates that there is power, seems that the signal is not interpreted by the TV?


Hello\015\012If you are using its original remote control handset with this set, replacing batteries will poise no problem at all. If remote control does not works properly check the following.\015\012\015\012Check to see if ther ... LG 42PX5D 42 in. Plasma HDTV

TV powers on and the LAMP light blinks. There is no picture no sound. This problem arose randomly and out of the blue. Some sources as well as other answers here recommend to replace the lamp, but the lamp glows bright. As well, I removed the lamp from the housing and everything appears to be intact. The blink codes for this unit only indicate that the unit is powering on and will be ready in 15 seconds. Other sources I have read also suggest the digital main board is toast. Seems to be quite a


... Samsung HLR5667W 56" Rear Projection HDTV

Samsung LA46A750 - When we turn power on, it automatically goes off and on again. Screen stays black, only the red light power indicator goes on and off. also the red buttons on the right side of the screen, don't seem to work.


... Samsung Flat Panel Televisions

Apex ld4086 tv will not turn on. Checked power through switch. Indicating light is not on.


... Apex Digital LD4086 LCD TV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

This unit just stopped outputting. The indicator light is flashing red now and even the menu will not display. Power source and input source are check


L need both a model number and brand to offer real help or suggestions. ... Flat Panel Televisions

Panasonic power cut, i plugged in my digital box to the extension main whilst the tv was on. then my tv just blew. i just do not know what to do, and i have checked the fuse, and it seems fine. i tried turning it on ad connecting other sockets and extensions... yet nothing - not even a red light.


Powerboard should do the job.\012\012Found it here by searching the model :\012\012http://digipartsdirect.com/searchProduct.php?mainSearch=TC-P50XT50 ... Panasonic TC-P50XT50 50" Class Smart TV VIERA XT Series 3D Plasma HDTV

I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ... Flat Panel Televisions

My LG 50PC3D was manuf in June 2006. Just today the screen is black and flickering 1 wide band of dimlit grey slightly off to the left. The indicator light stays solid green. Any idea what may be causing this. I have checked all connections. The sound seems to be working fine but there is no picture.


I would first check for swollen capacitors on the power supply board. This model has about 9 under rated capacitors that usually go bad. The original caps are 3300 uF rated at 10 Vdc., and they should be replaced with 3300 uF capacitors rated at 16 ... LG 50PC3D 50 in. Plasma Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1282 seconds