Having problems with your Standard (CRT) Televisions ?

My Lg Flatron was working good but suddenly i cannot see any picture on it nor any channel is getting tuned after changing to AV mode the DVD gets connected ,tried setting the cable channels by surfing but still the problems persist.There is no picture nor any sound on TV mode only a blue screen



Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My Lg Flatron was working good but suddenly i cannot see any picture on it nor any channel is getting tuned after changing to AV mode the DVD gets connected ,tried setting the cable channels by surfing but still the problems persist.There is no picture nor any sound on TV mode only a blue screen


... LG Standard (CRT) Televisions

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

The t.v. was running fine until the usb orange button on the remote got pushed and now it's saying to run channel auto scan which I did. It did not correct problem. Still no picture. I went to set up Wizard and tried both the air and cable settings to see if I ran auto scan that way and still no luck


What happens when u hit the usb button again? ... Sceptre X405BV-FHD3 40 in. LCD HDTV

Rechannel tv GVA PDP3208- stuck on 1 channel only. I tried to follow solution: menu>picture>mode(enhanced setting only)>power up(max)>exit and then go back and use auto install, but still one channel coming out even if I switch to other channels.


... Flat Panel Televisions

The original tv setting have been changed ,now there is no picture prior to them changing the settings ,we had lost the local channels but had cable now there is no picture at all at first is was a cable problem,we had a good picture, until they start playing technician


Its very simple try to cleck the restore or go to the menu setting or make sure its not in video mode.god bless ... LG 42PJ350 42 in. TV

I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?


... Samsung LN-S2651D 26 in. LCD Television

I have a Sony Bravia kdl 32w5500 and it periodically switches itself off whilst watching programmes on one particular channel (WIN TV AUSTRALIA). It goes into a kind of sleep mode or something and sometimes also switches off completely. When it first loses picture, and sound, the green light is on and you can change channel and the picture and sound comes back but when you go back to WIN TV it again switches of picture and sound and eventually the whole set, if left on WIN TV. The remote channel


... Sony BRAVIA KDL32V5500 32 in. TV

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

UN55D8000 fuzzy I bought a Samsung UN55D8000 about 2 months ago and I am not happy with the picture at all! I am only watching HD chanels and the pictures are not clear enough. I even switched from ATT UVerse to Time Warner, the installer checked all my cables and I bought the most expensive HDMI Monster cable and the picture is still not good, not crisp, fuzzy, edges of people are jagged, etc...I have checked every adjustment possible on the settings...any suggestions?


... Samsung 55 UN55D8000 55 3D LCD TV

Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c


... Sharp LC19DV28UT 19 in LCD TVDVD Combo

Colour settings Tv screen flashed, went blank, came back in setup mode- retuned tv but now on all the picture modes i get a blue or green tint throughout the screen, the only setting that i get a desent pic on is in intelligent sensor mode but even this takes up to 20 secs to righten itself each time i change channel?


Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally c ... LG 37LC7D 37 in. LCD HDTV

Lg 42Lc5D LCD Tv has no HDMi input from al 3 ports. we have sound but no picture. Tv works in antenna and cable mode, just not HDMI. i have powered down and reinstalled the cable but still no picture. any ideas tv is 3 years sold. [email protected]


... LG 42LC2D 42 in. LCD HDTV

TXL32LXD700 when watching tv on cable occasionally (approx every 7 to 10 days) picture breaks up going multi coloured, then screen goes blank before switching on again but onto a freeview channel and not the original cable channel. This all happens in the space of about 1 minute. I have had a loan set in from the shop where I purchased my tv from for 6 weeks now and have not had any problems at all. I spoke to the panasonic repair shop who have my tv on test and they have not experienced the pr


Have you tried different cables and different input sockets? (you probably have) the tv switching to a different input could be a sign that there is a problem with the cable or socket and the tv is trying to protect itself. Good luck. ... Panasonic Flat Panel Televisions

Input settings We hooked up a Wii and changed the input settings to play. Now we cannot get it set back to TV Setting, We have a fuzzy picture coming in from Dish. I have it set on Cable, Input is set on Channel 3


... Panasonic PT-47WX49 47" Rear Projection Television

Element TV Model FLX-1511B does not scan for channels when hooked to a live cable jack. Checked "input" and followed set up procedure and it is still not picking up channels when scanning.


... Element Electronics Flat Panel Televisions

I have a new audiosonic hd set top box. I have managed to auto scan all the channels in and its working great except last night I noticed for some reason channel 9 and gem have sound and full signal but no picture!! Very strange as all other 20 channels work perfectly!! I've tried tuning them in vhf but still no luck. Any ideas??? Thankyou.


... Flat Panel Televisions

I have onida xaria lcd 22. After 14 months a new option automatically comes that was factory setting and hotel setting . I pressed factory setting but after this my source button (tv to pc or hdmi ) is not working. One more thing i am unable to change channel, sound type or picture mode. Please help :me i am feeling worst to be onida customer and his customer is also worst. When i talk to repair executive he smiled and no i will not give the process how to enter security. Plz plz help me guys w


... Standard (CRT) Televisions

LCD television starts normal, but after 2-3 secs, the screen turns black and remains black, no picture, but sound is still there. All cables have been checked - all possible input channels have also been tested to see if they produced any images onto the screen. When i look in a dark room to the black screen (with a flashlight), you can see (but very hard to see) some grey images (tv pictures) moving over the screen. I've read onto this very interesting website that on some models, one c


... Samsung Flat Panel Televisions

Panasonic viera TX-32LXD85 used to connect fine to HumaxT2hdr and Lenovo laptop via hdmi cables. Now when you switch on either units the tv switches to hdmi signal/port but no picture appears on screen. tried switching cables turning on/off in different order and resetting tv to shipping setting. Still no change.


... Flat Panel Televisions

LD-3237 The TV was connected to the cable box and worked fine. We then accidently tried to change channels with the TV remote rather than the cable remote and we have not gotten any picture since. Tried everything but still get the No Signal message. What do I need to do?


... Westinghouse 32in LED HDTV - Black LD-3237

My Sony KDL-40XBR7 has developed two problems. 1) Sometimes when changing channels the screen turns green. I can solve this by turning off the set then back on, but what's causing the problem? 2) In the past few days whenever I turn the TV on there are horizontal bands from top to bottom. They are faint and the picture can still be seen. Additionally the picture is ghosted; a second ghost image appears larger and below the original. This lasts for a few minutes then goes away. Of course, the TV


... Flat Panel Televisions

I moved my samsung SPP4251AX/XAA flat screen tv to a new location. I had the cable un hooked and the power off for 2 days. When I hooked the cable back up to the tv the picture will not come on. I have tried everything I can think of from the set up menu and the screen is still fuzz.


... Samsung Flat Panel Televisions

Tv has no picture. I was connecting RCA cable from my computer to tv and put the wrong connections on to the tv, now the picture is gone but the sound still works and also does the on-screen settings


I would suspect the backlight inverter is faulty:I would try to look on the power supply first for popped capacitors that supply the 24v rail for the backlight inverter.Having sound is a positive when it comes to repair. ... Flat Panel Televisions

My thanks to Guest however as mentioned I have no problems using the SET-TOP BOX remote with my TV! I want to use my NEC remote as a stand alone; as I still have ANALOG reception? So disconnecting my SET-TOP and using my coax cable direct from wall socket to my TV I should be able to receive the ANALOG channels? and that's not happening; so when I use my NEC remote and go to menue the AUTO TUNE BOX DOES NOT DISPLAY! and that is the problem!


... NEC Flat Panel Televisions

Set: RZ-17LZ40 it is not possible to display a full 16/9 picture when i use the ARC button i have only the choice 4:3 wide 14:9 In the wide mode i still have in the upper and lower part of the picture black video (input is a 16/9 videosignal) is there something wrong with this TV or can it adjusted? Thanks for any replay


... LG RZ-17LZ40 17 in. LCD Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1665 seconds