Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have the lg 50ps3000 and have some wireless headphones AKG K912 that help me hear the sound much more clearly,how do I connect the headphones to the t.v.???? the same unaswered question as patrick392.
I have written above a 3.5mm socket AUDIO IN on back of TV but when I plug headphonescable from the transmitter unit nothing happens , they work perfectly connecting to the laptop headphones socket (which I always thought was audio out). Is there another socket or am I doing something wrong?
LG M227WD TV
I have just purchased a sharp HTSB 200 for my LG tv model 32LB75-ZB it has no audio out sockets and no headphone socket so i tried a scart to jack plug lead but this did not work either. If i purchased a sound bar with digital optical connections would this work.
LG 42LD450 42 in TV
TH-50PX77U inputs Only the coax and audio visual cable inputs work.
the composite and hdmi inputs do not produce an image.
the menu, and av cables are all in perfect picture, but nothing shows up when connected via hdmi or composite cables.
Many times a computer's post screens will not show up a TV set, and once the computer itself has loaded the drivers and settings, the set may need to be shut off and turned back on for the HDNI or PC signal to be detected.It is also possible ...
Panasonic Viera TH-42PZ80U Plasma TV
I am trying to connect a Advent notebook to a Phillips 42PF9641D/10 TV via the VGA socket and the Audio L/R socket from the headphone socket on notebook. I can get picture but no sound on TV but ok if headphones are fitted? have set up menus on tv as per manual and used new cables to tv, What am I doing wrong ????
User manual download: \012http://download.p4c.philips.com/files/4/42pf9641d_10/42pf9641d_10_dfu_eng.pdf\012\ ...
Philips Flat Panel Televisions
My TN61X81 cannot start. When plugs in, there is a "click" sound like relay action, but nothing else happens, screen is black, the front red LED flashes (not in a constant pulse), front "power" button doesn't work.
This kind of problem happened before, but it could be solved by re-connecting the power. This time it didn't work anymore!
We have the same problem with ours, not sure what exactly is wrong with it, but what we do is unplug the tv, take the back bottom panel off, and press down on all the circuit boards. After we do this the tv comes on and works fine, but we have to do ...
Toshiba TN61X81 61" Rear Projection Television
LG 37LC2D-EC My Tv has suddenly started to flick between a black screen and picture after it has been on for approx an hour. I have also had a message of "This display does not support HDCP". Does anyone have any idea whats happened? The HDMI cable port is connected to Sky+HD box and I have eliminated fault of HDMI cable as it works perfectly on another TV. I have eliminated Sky+HD box as it works perfectly on another TV. Could an over air/sky/playstation update have messed up the TV?
It sounds like the TV is having sync issues with your Sky+HD box. HDCP is the "High-bandwidth Digital Content Protection" that is used between components. It requires a sync between the devices to ensure that you are not trying to "steal" the video ...
LG 37LC2D Television
Trying to connect Sony wireless audio unit to tv using a jack lead,plugged into unit. And it began buzzing,connected to headphone socket on tv (as instructed)
Since it was covered with warranty just return the unit to the supplier or ask them for assistance.by the way what unit have you been hooked up in the tv. ...
Flat Panel Televisions
I have a hitachi plazma TV, I asked about it last week. It went completely green with sound then completely black with no sound. I was told it is shot but if I took the back off and took the boards apart and put back it may work. My question is after doing that nothing happened but I noticed that movies in the DVD player work perfect and video games work fine. If they both still work could it be something simple to repair, or is the TV still shot?
Sounds like a problem in the tuner if the inputs work fine. I assume all that isn't working is when you try watching cable? ...
Flat Panel Televisions
Philips Magnavox 9P6031C103 projection tv quit working 2 years ago (before, the picture began to shink and expand until it finally quit completely with no audio nor video -- turned it on two years later to double check the symptoms (whether there was any chirping sound) so we could order a repair kit and the tv worked perfectly fine for a couple of hours and then I turned it off, thinking the problem had worked itself out and no fixing was needed (must have been the bad Suddenlink connection th
Based on what you described I would say your TV has the "shrinking and expanding" fault. Its a common problem on that model and the symptoms can range from the video shrinking and expanding or no video or no audio....You can read more about this fix ...
Philips Magnavox 9P6034C 60" Rear Projection Television
I have an Samsung PS42C451 Plasma 42" TV. I have had it for approximately 10 months. I turned it on today and I have no picture but I still have sound. This has never happened before. I can't even see anything, not even menus or volume or channel info. I have checked the aerial and all connections are connected properly. Nothing is working
I have a samsung plasma tv ps42c451 bought xmas time about two months ago it decided that it was not going to give me a guide anymore all it does is says no information for everything . ...
Samsung PS42P2S 42 in. Plasma Television
Sony KD-34XBR960 has no power; working perfect, on next start up the usual pop when powered on with remote, but failed to come on.
No flashing lights, nothing. Unplugged, waited 24 hours, plugged into wall socket, nothing.
The problem is in the power supply, the most common cause is an open fuse and open capacitors, if the set is more than 10 years old consideration should given in replacing the tv especially if a professional gets involved. ...
Sony FD Trinitron KD-34XBR960 34" TV
Analog Audio Out signal has very high distortion. Signal wanes in and out, wanders from one channel to another, and develops high static. This happens when Audio Out is configured for Fixed Output. When configured for Variable Output, the signal is perfect.
Output is being used with Sennheiser RS120 wireless headphone set.
The problem is more likely to be with the wireless headphone set rather than the TV. It makes no sense that the signal changes channels. The only difference betweent he fixed and variable output is whether or not the volume changes the output signa ...
Flat Panel Televisions
I am trying to hook-up a PS2 to the DWT1304. I have the video (yellow) and audio (white/red) plugged into the front. I have tried to access the game system on channel 2, 3 and 4 with nothing but fuzz/static on the screen. The PS2 has been hooked up to this TV previously and worked. I have tested the PS2 connection on another TV and it works fine. I just don't know what else to try with the DWT1304 TV
Have you tried the AV Channel ...
Durabrand DWT1304 13" TV
Panasonic projection tv model tx 43p950x, there is power loss while I turn on the remote and there is no power when I pushed the button on front of the TV. Before it happen I connect an audio cable on the back right above mark monitor, and the other end to my amplifier audio. Then I hooked up a magic sing in front on the TV. I turn the TV and the Amplifier, both is on, then I turn on the magic sing and it works and I could hear the sound in my Amplifier speaker and so in the TV. Now I turn both
Panasonic Flat Panel Televisions
TV picture is breaking up. Used to work perfectly. Sometimes the fault clears when we switch on the attached DVD recorder. Then the update stations option shows on screen. No matter if we choose yes or no for the update, the picture then goes back to unwatchable. The loft aerial has a booster attached. I have checked all connections and all seem fine including the booster. It is the fact that the TV used to work OK but something must have changed to make this happen. None of our neighbours are e
Panasonic TX-32LXD70 32 in. HD-Ready LCD TV
I have a Vizio VO370M that I purchased in December of 2009. I have no audio, on any channel. My audio settings have not changed. It was working fine yesterday. I have checked all of the connections. Mute is not on, and no headphones.
Hello\015\012Just check its audio by connecting its audio output to any other input source like amplifier or so, and see whether there is sound coming through it or not. If there is sound from the amp, and not from the TV; make sure that the a ...
Vizio VO370MGB 37 in LCD TV
I have a TOSHIBA MODEL 36-A-40 YR 2000 (Tube Type) which works fine 98% of the time. It is connected to a Comcast cable box. It will occasionally go off for no apparent reason and then come back on in about 3-5 minutes. When it returns, it sometimes comes back on perfectly. Most other times it comes back on slowly with a large red strip across the tube and this will slowly but eventually blossom into a good video picture and the audio will return. If you hit the side of the console, tha
Bad solder connections do eventually happen for most sets from heat and expansion on the board--you have really solved this issue--you have a physical issue in the set and now you have to find where.If the picture were to dim out slowly and c ...
Toshiba Standard (CRT) Televisions
Sansui HDLCD185W 19" LCD HD Television with 1 HDMI, 1 PC, 1 Component, 1 Headphone, 1 Audio out. Month after opening the box the HDMI port stopped working. Feels like it's loose and company said it was not covered in warranty. How can I tighten up the connection so I can use it again?
Try to download the service manual to this set. It will have all details. ...
Sansui DTV2760 27" TV
I have a Sony KF 50 WE 610 projection screen TV. It has worked perfectly since I bought it six or seven years ago. This morning I turned it on and the sound came on for a second, but then the sound went off and nothing else happened for about one minute. At the one minute mark it turned off by itself and the red indicator light blinked 5 times in a row... paused... blinked 5 times in a row... paused... and then blinked 5 times in a row again. When I powered it up again, the indicator light blink
Hello\015\012Five consicutive blinks at a time and the stops and again blinks five; is its self diagonosis procedure. All modern Sony sets has this function included in its circuits. If the system control IC inside it detect any fatal fault ...
Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television
Phillips sond bar 2000 series (model# CSS2123B/F7): hooked up the sound bar to my Toshiba HDTV - LCD TV. Used the red/white audio in option. Followed directions in Quick start. Sound bar is ON. Remote working. The light selected for Aux.. I mute the TV - but nothing happens. No sound. What should I do?
Flat Panel Televisions
I have purchased a 50inch plasma tv which does not have a headphone socket. I wish to use headphones with this tv - can I use the composite audio red and white jacks on the back to plug into a headphone female socket? Is the audio red and white out socket live all the time or do I need to go through remote?
Hello smiths47 34:What you will need is a Stereo RCA to stereo 1/8" cable that will connect you to your TV. You can get it at any radio shack or electronics parts store.You might also like this which is a wireless headphone setup for your ...
LG 37LC2D Television
Audio line out does not work on Flat screen LCD TV
Is the external amplifier on 'mute' mode? Also check whether the audio out is available for this model, in the operation manual. ...
Hitachi Flat Panel Televisions
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of
Log in new account ...
Flat Panel Televisions
i have a lcd toshiba regza LV733N, and i get no audio when connected to pc on hdmi connection. but i do get audio on the same hdmi cable when is connected to my ps3. on a lcd panasonic, both the video and audio connection works fine.
i use win 7 x64, and the sound icons mutes when connected to regza.
You must use HDMI 1 port when conected to a PC (to have a picture). Also set the audio in to HDMI not to PC. Look at SOUND/ADVANCED AUDIO. You can use separate analog cable also... Please just read the F manual ...
Flat Panel Televisions