Having problems with your Flat Panel Televisions ?

Our LG 42" plasma tv screen went black after a popping noise but still had sound. Tried to reboot by unplugging power, holding power button for 60 seconds and re-plugging power. Still have sound, but completely black picture



Answers :

Most probably the capacitors in the power supply have burst. Might need attention by a qualified service technician.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Our LG 42" plasma tv screen went black after a popping noise but still had sound. Tried to reboot by unplugging power, holding power button for 60 seconds and re-plugging power. Still have sound, but completely black picture


Most probably the capacitors in the power supply have burst. Might need attention by a qualified service technician. ... LG Flat Panel Televisions

Hi, I have a lg 37lc2d. I turn on the tv, the green power blinks for about 5 seconds. Then all I get is a black screen and no sound. I unpluged the tv from the bluray player and the directv box, and plugged in again, and still the same issue. Why did I unplug everything? To see if i could get the "blue screen" or at least the menu, but no, that did not happen, still black screen, and no sound. Any suggestions? This product has been discontinued, and I have done searches to find that I am not the


Wow I have the same problem! Just happened today same model & everything.This stinks! ... LG 37LC2D Television

My akai lct37z6ta will not turn on. i tried holding the button on the tv for ten seconds or so but still nothing. i also tried different outlets and different power cord. at the bottom middle the red light blinks while it is plugged in. any ideas?


Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.Th ... Akai LCT37Z6TA TV

LG 42PQ30 plasma tv wont turn on anymore, when you plug the tv in it makes a click noise and when you hit the power button the blue light comes on then changes to red after couple seconds. Note the screen isnt coming on and no sound. What do you have to fix/replace to have tv work again, I opened back of tv up, I dont see any of those compactors thats look bubbled or leaking. I see some have like hot glue on them some have white glue. What do you think is wrong with the tv, i want to tr


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... LG 42PQ30 42 in. Plasma TV

I have a 13 inch Craig LCD TV. I turned off my tv, at first it would not go off when I pushed the power button. I pushed the button again and I no longer had sound, but I still had a picture. I pulled the plug on the tv to turn it off. Now sometime later I have pushed the power button to turn on the TV. I have a picture, but no sound. Can you help me?


Your problem has been caused by the cables getting displaced when you were pulling out the power cord.\015\012The simple and easiest solution to your audio problem is to switch off the TV. Disconnect all the cables. Wait for sometime. Reconnect the c ... Flat Panel Televisions

TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help


Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

Westinghouse 26 in. flat screen TV/DVD combo power is on with remote black screen no picture no sound dvd stuck inside. I tried to get dvd out by holding dvd release button on remote nothing happens.


... Westinghouse SK-26H590D Television

I have a sharp aquos lc-c5277un. Both the power and OPC lights together blink twice. I tried unplugging it, holding down the volume up and channel down buttons while plugging it in. That left me with a solid power light on. I pushed the power button to turn it off and it turned off. Pushed it again to turn it on. It turned on and worked. 10 minutes or so later I heard a pop sound and the lights started blinking as before. This loop has played out three times. Is this the power board or


... Flat Panel Televisions

My Sharp Aquos turned off by itself and doesn't want to turn on. Both power and OPC lights blink green.I tried to reset my tv by holding power button and also down volume and up channel buttons. I only got the power light on but the screen was still black. I read that screen with letter 'k' should come out, but didn't. How to fix it?


That procedure was for a full reboot, not the case here. The blinking signals a hardware defect - if it's continuous it signals that the power source has been shut down in emergency mode because another part inside the tv has failed and now it acts a ... Sharp AQUOS LC-42D85U 42 in. LCD TV

Received this TV from a friend, was working when it left his house, I have place on tv stand, plugged it in, hit the power button, it came on for a breif second. Now the on-timer light is blinking, I can hear the (possible) tube kicking (a clicking sound) but can not get the tv on, nor can i get the tv to stop blinking the on-timer / power light. At times it is a fast blinking (once a second), other times it is blinking slower, (once every 3-5 seconds). I do not have the original remote, but hav


Did u ever find a solution? ... JVC AV-32150 32" TV

50pfp5332d got this tv not working. found no power when conected and decided to remove back cover. found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking. pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again. what do you think?bad PCB or ba


Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ... Philips 50PFP5332D 50 in. Plasma Television

Screen comes on for 20 to 30 seconds then goes black. the power light is blue (on). when i hold the power button on tv it comes on again then goes off after 20 to 30 seconds. i have tried all the differant inputs, except for the pc input and i get the same results. i opened up the back of the set to see if it could be a bad cap but everything looks good,no burnt smell, nothing melted or poped, could this be a bad input board? This tv is not used much (less than 1000 hrs) it is clean and looks ju


... RCA 32la30rq 32 Tv Black 720p Lcd - - RCA

Toshiba model 42hp66 Plasma flat screen Problem No picture or sound. Pushing on button 2 clicks are heard A slight hum is heard at the Z SUS board. Green power light is on (power light is red when unit is off) Slight clicking sound from Y SUS board. Now that I replaced the open Fuse. (Fuse 4AH250VP Found open on Y SUS board as looking at rear the Fuse on the left). Still no operation?


Do you still have the clicking noise? The tv turns on but no response issue is associated with the main A/V board 99% of the times if there is no clicking sound ... Toshiba 42HP66 42 in. LCD Television

We push the power button on the tv, it blinks blue then red, as if its loading up, and yet nothing happens.We have a black screen -no picture, it was okay the night before, turned it on the next day, black screen, no picture. We have unplugged it, just plugged the power chord into it a few days later, still no picture. Could it be the bulb, what is this cost going to be? Could it be the pannel? what would the cost be? Our issue is, we have had it for 4 years, warrenty completed, is the co


Parts for LCD TV's are quite cheap its just the labor that is the issue.\015\012\015\012It could be either the PSU or the Main board that is the issue.\015\012\015\012Try a mains reset. Unplug from the wall, press and hold the ... LG Flat Panel Televisions

I have a sharp LCD tv 2years old it I will press the power button to turn it on and it will stay on for approx. 10 seconds and then turn itself off. I have even tried holding the down the pwer button for a few seconds to reset the tv but it still does the same thing


Hope it will help you, you may have problem with power supply and inverter area. low rated and leak capacitors can cause low output voltage on the power supply the tendency is the power to reset or turn off itself. just also considered bad component ... Flat Panel Televisions

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

I have a Samsung HP-5064 plasma TV. Over the last month, it occasionally would have sound but no picture when you turned it on but the picture popped on after 2-3 minute. I now have no sound or picture. I unplugged power for a while and than plugged it back in but still no picture or sound. What are my possible problems? Doug


This is typical with many sets as there is a high possibility that the components over a period of heating and cooling , tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints that have pla ... Flat Panel Televisions

Hello, i have a samsung 42' plasma tv model #pn42c450b1d. the tv doesn't want to turn on. i plug it in and you hear a clicking noise se a red power light. also when you press the power button on the tv in the back u see a green light come on for a second on one of the circuit bords( the one under the power board) and simutanously you see a red light come on and and off at the same time on the circiut board with the av, hdmi, inputs. i looked and thier doesn't seem to be any bulging capaciters. a


Hi.As you know the TV is in protect mode because an internal fault has been detected. I think that you already tried leaving power cable disconnected for ten minutes. After connecting back restart the TV with no device attache ... Flat Panel Televisions

I have a Insignia NS-LCD26A and all of a sudden it has no display or sound. The green power light comes on and I have to hold the power button for 5 second to turn it off?


Probably yes!!!! it will fix the issue. ... Flat Panel Televisions

Panasonic TC-P42S30 plasma power light on black screen no sound?


... Panasonic Viera Tc-p42s30 42" Plasma Tv - Hdtv - 1080p - 600 Hz - PC

Panasonic TC-P42S30 plasma power light on black screen no sound?


Main digital board should be troubleshooted. If\012you are not familiar with electronics, do not attempt to repair. Whether you suffer fatal electrical shock!\012Instead, contact any ... Panasonic Viera Tc-p42s30 42" Plasma Tv - Hdtv - 1080p - 600 Hz - PC

I have a sharp LC-37D40U that will not power on. The power light blinks 1 time every second. I held the input and volume - button while plugging the TV on and the TV cuts on and then cuts right back off, no buzzing sound is heard at all. I believe it is either the lamp or the inverter board by researching this site. How can I test which component is bad or just continue troubleshooting from this point?


OK if you have blinking red light.Try to open the cover then disconnect the inverter board after that try to power it on again..If the light stays in blue (LIT) and of course you don't have picture or backlight you have faulty inverte ... Sharp AQUOS LC-37D40U BACKLIGHT INVERTER BOARD PN: IM3826-1

My hitachi plasma tv model P50S601 only flashes a picture for a second before going black. Once it goes black, the blue power button flashes and can't be turn off by the remote or by manually pressing it on the tv. The only way to stop it is to unplug the electric cord. Thanking you in advance for any help you might be able to give me


These tv's are know for this. I have a topic about it telling you how to test and repair these at http://www.homet ... Flat Panel Televisions

My TN61X81 cannot start. When plugs in, there is a "click" sound like relay action, but nothing else happens, screen is black, the front red LED flashes (not in a constant pulse), front "power" button doesn't work. This kind of problem happened before, but it could be solved by re-connecting the power. This time it didn't work anymore!


We have the same problem with ours, not sure what exactly is wrong with it, but what we do is unplug the tv, take the back bottom panel off, and press down on all the circuit boards. After we do this the tv comes on and works fine, but we have to do ... Toshiba TN61X81 61" Rear Projection Television

LG 32LC2D-UE, when tv is turned on for the first time of the day, power light blinks about 11 times, black light comes on, no picture and a high pitch squeal. I have to hold the power button in for about 10 seconds to turn it back off. It does it about 2-3 times before tv functions normally.


... LG 32LC2D Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2094 seconds