Having problems with your Flat Panel Televisions ?

I have a LG LCD TV - None of the HDMI ports work - get a NO Signal - I know the cable is good - I use it on my other TV set



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a LG LCD TV - None of the HDMI ports work - get a NO Signal - I know the cable is good - I use it on my other TV set


... LG Flat Panel Televisions

I have an LG 26LZ5RV TV. I have connected it from the RF output of my Sky+ box (using a coaxial cable) to the "Ant In" socket at the back of the TV. The RF output on the Sky box is set to Channel 35 and the power is on. I know that the output is working, as I have tested it on an old portable TV with manual tuning. My problem is that I cannot get my LG TV to tune in to the signal, using either auto or manual tuning. I have used System "I" and tried setting the Channel to 35 then searching b


... LG Flat Panel Televisions

Why do i not get a signal form my Technicika STBHDIS2010 set-top box to my Bush LCD32TV022HD TV using the HDMI cable?


... Flat Panel Televisions

I have a toshiba 46XV550A flat screen. I have previous been able to watch video from my laptop via HDMI, however now when I plug it in all I get is the TV going from blue to black screen. The laptop LCD screen also used to turn off and you could toggle between using it and the TV screen using Fn F8, however the laptop doesn't seem to recognise the TV anymore... it keeps the visual on the laptop even when I plug in the HDMI cable to to the TV and Fn F8 doen't seem to work any more - do you know


... Flat Panel Televisions

None of my component inputs are working i have hdmi hooked in for cable, a computer hooked in to the computer jack, and they all work fine. i tried my xbox 360 in every available input with the component cables and get no picture or sound i have used multiple sets of cables


Did you switch the Xbox HD switch to the off position? ... Sharp LC-C4654U 46 in. LCD TV

I get a weak or no signal message on my new Samsung plasma. I'm using coaxial to my cable box. The cable works fine because I can see the vcr when it plays. I have it set to cable on the right channel for my area (4).


In this case, your VCR becomes the cable channels tuning device for your TV, the better connection should be from your cable box output to your antenna/cable TV input with the coaxial cable, surely, your TV has a better cable tuner than your VCR, to ... Flat Panel Televisions

The TV works however I cannot get the set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none were read. My other TV's work, so it's not the cable company. I even plugged the plug for about 30 minutes.


Check you cable or air settings. I would try cable setting first then scan channels, if that doesn't work I would try air and scan.I am not sure cable setup.\015\012also check tv input settings. the lcd's have an input selection button. it will ... Flat Panel Televisions

Hello, I have a sharp lcd tv model-LC 32AF10N, and have the problem of not able to get the sound, since I am using the HDMI cable. but I can get the picture .. Can anyone help me to know why? please.


... Flat Panel Televisions

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

Sharp/autocontrolsignal When using a hdmi cable on my new Sharp Aquos LC60c6400u I get a black screen no sound and a signal saying recieving auto control signal now about every minute does any one have a idea sharp says they have never heard of this well I now know this is BS


... Sharp Flat Panel Televisions

This tv was used outdoors under a covered patio in south Louisiana, which means high heat and humidity. When not in use it stayed covered with a large trash bag. The problem is I get no response (lights, sound) when powered on with the remote or locally from the set. I've since had it inside for app. 2 weeks and still nothing. I have verified my power sources to be good. I don't know if there is an internal breaker or fuse or anything like that. This tv is a couple years old. Thanks for any he


The internal power supply has failed, possibly due to bad capacitors. Get it repaired. ... Toshiba 26AV500U 26 in. LCD HDTV

I purchased a used LG 2006 32lx4dc flat screen TV from a hotel. When I turn it on it says no signal and I cannot access the installer menu it was set to be run on lodgenet cable system what can i do t


... Flat Panel Televisions

Hi all! I desperately need help in finding a Ribbon cable for my Samsung LN40B350 I have been on the phone and on the computer for 4hrs trying to locate this cable! It goes from the LCD T-con board to the LCD panel! I know... they don't sell the cable alone... It comes with the LCD panel as far as I know. The cable is 80-85 pins, about 2" long by 1.5" wide. Made by Sumitumo. Any ideas of where to get this? I Will pay TOP DOLLAR for it! My old one has a frayed wire or two. it seems so simple but


Http://cgi.ebay.ph/Samsung-Internal-Cables-LN40B530-/270600454414 ... Samsung LN40B530 40 in. LCD HDTV

I have a Sony48 in. digital TV with an outdoor antenna; 30 ft leadin;no converter asnd get 24 channels of great reception.I have aZenith 23 in.TV; Mod # B19A23DC ,mfg. Jul 1999 erich I would like to install 35 ft. disatance from the Sony. What added parts do I need to boost the signal to the Zernith? Can I use existing cable wiring [behind wall] to connect the added set?


Hello\015\012There is no need to boost the signal. You can connect both the sets with one antenna. Just buy one two away splitter. This connector can be bought from most of the electronic spare part shops at your town. With that, you can con ... Flat Panel Televisions

Using NSX-46GT1 in Europe (Switzerland). I get an unsupported HDMI signal when i connect it to my cable set top box.


Check the format of video you try to feed. ... Sony Google TV NSX-46GT1 46 in. HDTV LCD TV

I have a Panasonic TC-L22X2 LCD TV, sony google tv, a u-verse tv box, and a small JVC compact stereo. I have the sound from the uverse tv box coming out of the JVC stereo using red and white audio cables, but I also want the sound from my google tv to come out of the JVC stereo. The only way I've been able to get sound from the sony is out of Panasonic TV internal speakers. These speakers are low power and so the sound isn't very good. Thanks for your help.


Feed the audio from the google tv to your panasonic tv then the audio from your tv to your amp ... Panasonic TCL22X2 22 in LCD TV

I am having problems setting up my dvd/vcr to my tv. I am useing prntout that came with my dvd/vcr combo, however I cannot get a picture on my tv. I realy don,t know what system to plug the audio/video cables in the back of mt tv.I have tryed them all.Your imput would br greatly appreceted. thank you.


Hello -\015\012\015\012Please can you let me know the following details:\015\012\015\0121. Model number of the DVD/VCR player \015\0122. Model number of the TV\015\0123. Type of cable used to c ... Philips Flat Panel Televisions

HI , i have just purchased a lcd sony bravia KDL32EX301 from amazon uk as i live in france.all the reviews are pretty good about this product but i don't seem to get the best image.i am connected to a french dish (canal sat) .is there something to do with the fact i live in france.??or is there any special settings i need to know??i have tried all the different options but the image is still not very clear. thanks for your reply


The tv you have , does has an exceptional picture i know as i have one, are you sure that it isnt the picture coming from the canal sat box thats the problem. Easiest way of telling is to hook up a good dvd player, blu ray if you have it and play tha ... Sony KDL32EX301 32 in. HD-Ready LCD TV

I have a Sylvania TV Model 6520FDF and I am trying to change it back to use a antenna from cable. I need to know how to get it set back up to do this please


... Sylvania 6520FDF 20" TV/DVD

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

All 3 HDMI ports aren't working showing "no signal" (my main problem), but only port(input/source) on whole tv that works is RCA input/source(A-V,Y-R-W cords)


... Curtis LCD3227A 32-inch LCD TV

I purchased a Toshiba LCD TV/DVD 22 DV500B for our great grand daughter in setting it up, I went through the auto set up, then it asked annolog yes or no I pressed yes thinking I would get a few extra annolog channels for her, all I ended up with was 4 good annolog channels and one not so good. To retune the manual states. Press MENU on the remote. Select SETUP and then INSTALLATION. I press menu but only get picture/sound quality changes. 6 different areas of change but no SETUP


Hey, i had this exact problem, made the same mistake with selecting yes. Worked out the solution is to press the source button, then scroll down one to DTV/USB, and this will be the free view. Hope it helps, Ben ... Toshiba Flat Panel Televisions

Trying to connect lg 32lk330 to my computer using vga cable, getting no signal


... LG 32LK330 TV

I have a 37 inch lcd hd tv made by Curtis model 3717A. I bought the set about 18 months ago. When I attempt to turn the set on either manually or by remote, the on/off light begins flashing but there is no picture. After leaving the set unplugged for several hours I was able to turn the set back on. Since that time I stopped using the tv's on/off, instead just using the cable box. My cat stepped on the power strip yeserday and now the tv will not power back up. Help.


... Flat Panel Televisions

SanyOur house was struck by lightening and now I can only get sound from my TV when connected by the coaxial cable or the RCA (red/white/yellow) cables. If I connect the TV using the componant (red/blue/green) jacks then I get full sound and picture so I know the TV picture does work. Trouble is I do not have an extra cable box or VCR to connect the TV by componant cable. Is there any way to fix the TV so that the coax or RCA hookup will provide picture too aside from taking it to a TV repair


If your aerial is OK then your tuner has been damaged. A replacement tuner is going to be required. ... Sanyo Vizon LCD-15A2 Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2213 seconds