Having problems with your Flat Panel Televisions ?

I'm not sure of the model # but I have a 42" lg flat screen hdtv. Just recently the screen went blank. By blank I mean the tv is on, the power light says so, but the screen is a cloudy blue and the remote control will not function. I cannot shut off or turn it on with the remote and the channel do not work with the remote or directly on the console. It's like it just froze. Is this common? is there anything I am missing( reset button? a restart sequence?) Please help. This tv is only 4 yrs old



Answers :

Well first 4 yaers old is sadly quite old these days.

The first thing to do is to contact the LG support service. It might be difficult to find someone really competent on the phone, but if you do find one, they are usually helpfull.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I'm not sure of the model # but I have a 42" lg flat screen hdtv. Just recently the screen went blank. By blank I mean the tv is on, the power light says so, but the screen is a cloudy blue and the remote control will not function. I cannot shut off or turn it on with the remote and the channel do not work with the remote or directly on the console. It's like it just froze. Is this common? is there anything I am missing( reset button? a restart sequence?) Please help. This tv is only 4 yrs old


Well first 4 yaers old is sadly quite old these days.The first thing to do is to contact the LG support service. It might be difficult to find someone really competent on the phone, but if you do find one, they are usually helpfull. ... LG Flat Panel Televisions

Blank Screen I can turn the tv on and off using the power button or the remote. Other than that, the screen is completely blank. When the tv is on, the lights at the bottom light up but the screen is blank, and therefore, nothing works. When the tv is off, only the power button is lit up and the tv screen is still blank. Any suggestions?


... Vizio vm190xvt 19 in. TV

I have a Sharp Aquos 40E67UN. We came home yesterday and although the TV turns on and our directv box turns on, the tv just has a blank screen where you can go to different inputs, but none of the hdmi inputs work. I also tried hooking in my DVD player via 2 different hdmi cords to make sure that it was the direct tv box that was the issue, but the DVD wouldn't work either....just a blank tv screen (but its on). Any ideas on what could be wrong? I can change the channels, the remote is still


It's possible that you have a faulty component on one of the circuit boards inside your tv.\015\012\015\012It sounds like your backlight is working OK since the screen is lit up despite having no video so the fault is either with the MAIN ... Sharp Aquos LC-46D62U 46 in. LCD HDTV

Blank screen Hi! I have a problem with my sony bravia lcd tv model:kdl-40V4150. The only working buttons on a tv and a remote controller are power buttons. After turning on a tv you can only see a black screen with a "26.1" number appearing in top right corner. Nothing works


The fault is with its main power supply regulator section itself. One or more voltage rail is missing. Your TV need a through checkup. Seek tech assistance. ... Sony Bravia KDL-40V4150 40 in. LCD HDTV

NO CONNECTION WITH REMOTE- THOUGH THE BATTERYS STILL WORK- THE TV GOES ON FOR A FLASH AND THEN RETURNS TO DARG GRAY SCREEN -THOUGH THE TV IS ON -- SCREEN STAYS blank-absolutely no connection with th


... Hisense Flat Panel Televisions

Hi there. my teco tv is now working. the red standby light is on and when operated either by remote or manual the green led light comes on and the TECO sign but nothing else works after and im left with a blank screen. Teco lcd tv Model: TA4296RV Serial no: MZ083C040165


... Flat Panel Televisions

Hi there. my teco tv is not working. the red standby light is on and when operated by remote or manual the green led light comes on and the TECO sign but nothing else works after and im left with a blank screen. Teco lcd tv Model: TA4296RV Serial no: MZ083C040165


... Flat Panel Televisions

HELP! Olevia lt37hvs screen went blank. No Sound, panel buttons wont work. Backlight is only on on half of screen.


If you had audio i wold say its most likely the Tconn or its upper two connections to the Panel itself. But since you dont have any sound either I would assume its either the LVDS cable from the main board to the Tconn or the Main board itself as aud ... Olevia LT37HVS 37 in. LCD HDTV

Hello I have a bush 22 inch led full hd tv/DVD combi and I was watching a DVD when it froze I turning it off and managed to get out the disk however now the DVD screen is in black and white all the time and the DVD buttons on the remote won't work is there anything I can do ?


... Flat Panel Televisions

My lg LCD model 42lc2d-aa has a faint blank screen,no sound,the backlight works you can switch it on with the side control but not off,the remote switches the tv on &off ok.All PSU rails are correct leaving the PSU to the processing board


... LG 42LC2D 42 in. LCD HDTV

Our JVC DV3 television has been working fine and now we have a blank screen. There is still sound and you can change channels using the sky remote but no picture is shown


... JVC AV-65WP84 65" Rear Projection Television

I got a dell W3202MH LCD TV from a hotel, the tv was working but when i took it home, as soon as I turn it on only see the dell logo and after that nothing just a blank screen, also can select other input either with the remote or the buttons on the tv, any idea


The TV was programed to the Hotel Is in a lock mode you may need a code.Go and get IT. ... Dell W3202MH 32 in. LCD Television

My TV went blank. The screen is black. The green power lifgt comes on but nothing works. I tried changing the source but nothing shows up,nor when you push menu or any other button. The batteries in the remote are good.


Try unplugging the power. With it unplugged, attempt to power it on and hold the power button for 30 seconds. Repeat this 30 second hold.Plug it back in and turn it on.Where did you buy it? How long ago.We had an issue with ... Envision Flat Panel Televisions

Greetings - I have a Coby TF-TV1700 that in the past has worked very well. I had it disconnect for about 6 months and recently attempted to use it again for television and dvd viewing. When I switch between the video and tv modes, I get about 1 second of audio, and then the audio blanks out. The audio bar on the screen shows the speaker figure highlighted in red in the mute, non-mute, volume up/down modes. I went through the manual and the common trouble shooting issues supplement, but ca


... Coby TF-TV1700 Television

Vizio VP50 HDTV: I connected an HD antenna for first time on the TV and when I switch to DTV the screen goes blank, remote inoperable. Only controls on side of TV work, but there is no way to do a scan for DTV channels. So, without cable or satellite, this TV is just a giant computer monitor.


I have the exact same problem. It may be the tuner board is bad. I did some research and it seems like this tv is junk. I saw a link that said call Vizio and they are aware of all it's problems and are willing to give a new tv free of charge. I cal ... Vizio P50HDTV10A 50 in. Plasma HDTV

Frozen screen The remote will not turn the tv on, change channels or work the volumne. This is a brand new remote, because i thought the remote was broken. In manual mode, you can't change the channel or work the volumne by hand. The screen stays the same, with no volumne.


... GE 35GT740 35" TV

Coby tft dvd 1973 - multiple problems. dvd player stopped playing disks soon after purchase. remote control stopped working soon after purchase. some buttons work on remote while most do not. station information stays up on screen with previous station id even though switched channels. bought a universal remote (rca) to replace remote but not all functions work and can't find code to make all functions work.


... Coby TF-DVD1540 15 in. TV/DVD Combo

I have a Toshiba model 36A42 TV. I do not have the original remote. It has been working fine with the universal cable tv remote, I can turn it on/off with that remote, I can hear sound, but can not change channels. The TV screen somehow got stuck on one of the menu screens. It is a blue screen and says System Information at the top. It lists some information: Model, region, s/w ver, sdk ver, etc. At the bottom of the screen, it says System Reset Done. At the bottom left it says checksum: 14


... Toshiba 36A42 36" TV

My UNIVERSAL REMOTE (from shaw cable company) won't respond to my TV: LG 32LG30 . Got another universal remote, same problem. Can't use power button or volume on the UNIVERSAL remote but it will change channels through the digital box but nothing else will work. Have sought help from shaw to program remote to no avail. Is this a common problem with remotes? The remote that came with the TV doesn't work either. According to the shaw service this TV remote should turn the TV on &


... LG 32LG30 32 in. LCD HDTV

Top portion of the screen doesn't work. It's blank. 32" lcd Emerson


... Flat Panel Televisions

I have a Vizio TV that is stuck on RGB mode. This TV has been terrible since the first day. I can't reset it because the power button and the input button on the side have never worked properly and the remote we use to change to AV and HDMI isn't working for some reason and never turns on te TV. We usually have to turn on our TV with the DirecTV remote. The RGB mode has a blue screen that says "no signal" in yellow text at the top of the screen and turns off after five seconds. It's impossible t


... Flat Panel Televisions

Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.


... Pioneer PDP-5010FD 50 in. Plasma HDTV

Samsung TV Have a Samsung LN32A450 TV that the other night switched from component 1 to channel 3. Channel 3 has snow and the message "weak or no signal" in the middle of screen. Tried resetting cable box which didn't work. Called cable provider and was told it was the TV not cable. Have 2 other TVs in house that are unaffected. Tried unplugging TV for 5 mins which corrects problem but for only 30 mins or so. Last night volume on remote stopped working,all other buttons on remote work,and vo


Based on the information you described you may have a tuner circuit problem or power intermitent faikure fron the power supply module. ... Samsung Flat Panel Televisions

I have Samsug LN-S2651D TV. Recently the screen turned green (no picture). Sound works fine. Cable remote will cycle through channel changes OK. Cable 'TIVO' appears to work OK. TV Menu's seem to work OK. Picture menu: Mode=Custom; Size=19:9; Digital NR=On; DNle Demo=Off; Film Mode=Off; Blue Screen=Off. How can I get the picture back?


... Samsung LN-S2651D 26 in. LCD Television

I need a replacement for the lost remote control for model #VIZIO E320V 100-240V, 1.5A 50160 Hz A universal remote I bought from Wal-Mart did not work for the TV functions, such as navigating from one icon to another (Input, picture, screen width, etc.) The remote that came with the set worked perfectly, and would like to have another one like it that was made for this particular TV. I really like my new TV set. a


Here's the LINK. ... Vizio L32 32 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1668 seconds