Having problems with your Flat Panel Televisions ?

Hi, I have the following LG Plasma set: Model: 50PS8000 - ZA.BEKLLJP The engineer said the Z sus board was faulty, but I have to replace them as a pair 1) Do you need to replace them both ? 2) If not, do you sell Z Sus boards for my model ? Thanks for your help Regards Garry

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi, I have the following LG Plasma set: Model: 50PS8000 - ZA.BEKLLJP The engineer said the Z sus board was faulty, but I have to replace them as a pair 1) Do you need to replace them both ? 2) If not, do you sell Z Sus boards for my model ? Thanks for your help Regards Garry

... LG Flat Panel Televisions

Hello, I have a Hitachi Plasma Mod.#P50H401, tv didn't turn it on, We replace Y-SUS module and lower buffer and the tv. respond, but now appears thin black horizontal lines in the bottom (middle to down), we replace again the lower buffer, but the problem persist. What I need to do?

The power supply board has been known to cause the problem you describe, available at ... Flat Panel Televisions

I need to replace a 6870QZC004B z-sus board on my HP pl5060n plasma. Will part number 6870QZC004C work as a substitute?

... HP PL5060N 50 in. Plasma HDTV

Have a Vue eye TV - VUE42PDP, the remote has died and need to replace but WOW sells Vue universal remotes although they are not compatable with TV. Any ideas where I can purchase a new remote?

HI:\015\012First thing is to make sure the remote is bad, using ur cell phone in camera mode point the remote at the camers of your cell phone while pushing a button, it you see the infred light from the remote then the remote is functional. Yo ... Flat Panel Televisions

I have START TO FINISH, STEP BY STEP INSTRUCTIONS FOR REPLACING THE STK-393-110 CHIP IN SETS THAT USE IT--available here for free if you need them. please let me have the info for my mitsubi. ws-7390

They are available but meant for the models that have that part on the middle board. There are a few models where chip is on a side board--instructions would still apply but you would have to do some things differently.SD TECH ... Mitsubishi WS-73909 73" Rear Projection Television

Ok here you go, I needed to replace my lamp on my Sony KDF-50E3000, lamp XL-2500. Easy replacement, however now only the picture is HD and any words, at the bottom of the screen are blurry. The blurr comes in and out at times. Originally I took off the whole fron of the screen as I thought this was how to replace the buld as I could not find my manual. Do I need to clean the mirrors inside the TV? Thank you

Only getting HD has nothing to do with a lamp change. I would start by seeing if your antenna settings got changed. For example from cable to over the air antenna. As far as the blurry words on the bottom of the display, I think you didn't get the sc ... Sony Standard (CRT) Televisions

Mitsubishi MS-65315 Deflection Failure Error, which capacitors need to be replaced?

... Mitsubishi WS-65315 65" Rear Projection HDTV-Ready Television

I have a sony wega 42', I know i need to replace the lamp because I can not turn on my TV and a light is flashing above Lamp. So i would like to know what is the model name of lamp that needs to be replaced so I can purchase it and where? thank you

Hi, the lamp description is XL2100. You can purchase online at http://www.amazon.com/Sony-KDF-42WE655-Projection-Television-Integrated/dp/B00061ZNVE.Refer to user manual for lamp replacement.. ... Sony Grand WEGA KDF-42WE655 42" Rear Projection HDTV

Need instruction for replacing caps on DM module of mitsubshi 65 inch projection TV. Basically need procedure for removing the board containing the caps. Replaced the caps about three years ago but dont recall the entire procedure. Have doubling the capacity of the caps will last longer

Hi,It isn't hard to replace. The complete illustration is explained below :-http://www.jyerdon.com/tv/index.htmlLet me know,if needed further assistance.Hope i helped you.Thanks for us ... Mitsubishi Flat Panel Televisions

I have an Evesham Alqemi 32 SX LCD, the power board was replaced as an engineer informed that it needed replacing. this has been carried out. However the TV now seems to not want to come out of standby. The red LED on the front panel lights, but no matter what i do the TV will not come on from the standby mode. I am in mauritius and very little time left (days) before returning to the UK. do i need to trash this thing, i've been trying to fix it for two years.

... Flat Panel Televisions

Replaced Bulb but light is still blinking. Do I need to replace the Lamp Timer or is it another problem?

... RCA HD44LPW62 44 in. HDTV TV

Need to replace my jkp61g0j2bg, with what model can be replace

... Projection Televisions

Message on screen says lamp needs to be replaced then timer reset. Need lamp and instructions to reset timer

The lamp time reset will be or should be in the owner manual---Google the model number with keywords "lamp install" with the model number and the "manual" with the model number---Google can be a great help. ... JVC Lamp W/ Housing For Hd-52g786 / Hd52g786 Tv

I need a replacement stand for my VIZIO E320VA i dont want to ***** anymore where can i find a stand or replacement for that

Try , vizparts, or ebay ... Vizio E320VA - 32in Class 31.51in viewable LCD TV

Need a replacement pedestal stand for a Sony Bravia kdl60ex700 but can not seem to find one anywhere.

... Sony KDL60EX700 60 in. TV

Replaced the lamp in my Optoma Rd50 and the screen still reads that I need to replace lamp also T.v still having the same picture problem as before replacement lamp? what else could be wrong?

... Optoma RD50 Television

Cooling Fan My lights are blinking and according to Samsung's codes, it means a cooling fan is not operating and needs to be replaced. How do I know which fan? How many fans are there? If I'm going to replace one should I replace them all?

... Samsung HL-R4266W 42" HDTV-Ready Projection Television

Tv capacitor i need to find a replacement capacitor for my tv control board. i have the smaller capacitors but i need the large one that rarely goes bad but lucky me i need it. here is a full description. its made by CapXon 150uf 450volt GL105c temp. rateing. other markings are C628 VENT. the measurements are as follows. length is 1.625 inches or 41.27 MM. X diameter is 0.75 inches or 19.05MM. standard measurements are length1.5/8 inch X diameter 3/4 inches. i used online conversion tabl

... Flat Panel Televisions

Replacing light fan on Mitsubishi WD-Y65 after getting error code 42. I had gotten the good old "TV will shut down in a few seconds. Please check if the air flow is blocked," message a few weeks back and the TV shut down. Called Mitsubishi and they sent out a replacement thermal sensor under the recall. A week later a tech showed up, replaced the part, and the TV would not fire back up. The tech left saying he needed to check some things back at the office and would get back with us. He could n

... Mitsubishi WD-Y65 65" HDTV

Toshiba model 42hp66 Plasma flat screen Problem No picture or sound. Pushing on button 2 clicks are heard A slight hum is heard at the Z SUS board. Green power light is on (power light is red when unit is off) Slight clicking sound from Y SUS board. Now that I replaced the open Fuse. (Fuse 4AH250VP Found open on Y SUS board as looking at rear the Fuse on the left). Still no operation?

Do you still have the clicking noise? The tv turns on but no response issue is associated with the main A/V board 99% of the times if there is no clicking sound ... Toshiba 42HP66 42 in. LCD Television

Started out as no pic but still had sound - expert told me to replace z sus board which i purchased and did! now there is no pic and it makes a popping sound when turning it on to test it! Took tv to repair shop and now they are saying y sus board no good and poss z sus no good also! This unit has maybe been used a total of two years since purchase. Can you help clarify which board? Or verify if it would be 2 boards?

The y and z sustainer are always suggested to be replaced at the sametime as they work together to power the frontlight to the screen. sounds like the z board you got my be faulty with the popping noises, try to distriguish where the popping is comin ... Flat Panel Televisions

I have a devant t.v then i went to a service center d said it was the chips to be replace but i need to buy the whole ip board is it possible that i have to replace the whole ip board

... Flat Panel Televisions

Need to replace Vizio LCD HDTV model 370VA control board/t-con board but need to install! How do I install the part I do not even know where the part is?

... Samsung LN-S4692D 46 in. LCD HDTV

Power supply needs to be replaced

... Flat Panel Televisions

Lost remote for crt tv are hitachi remotes bespoke for the model or generic. Special need son is causing upset over the problem. He does not like universal remotes and is saying it will cost 40 pounds to replace. No money for this, hope some one can help as replacement prices apear to vary greatly. I am not sure of the model as he is 180 miles away but can find out if it is necessary.

Have a look on ebay for a replacement remote controller for your model number. ... Hitachi Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0892 seconds