Having problems with your Projection Televisions ?

The picture flashed green to black several times and the image went askew. Then everything went black and stayed that way. Sound remained on. After a few minutes, I tried to turn the unit back on and it did the white up and down lights ending with the two top lights on (now red). I have changed bulbs twice before when this happened and that fixed it. This time it didn't. One new thing that happens now (I know this is weird) is that when I turn it on the set chirps in the vicinity of the bu



Answers :

Hi lc99527,\015\012
\015\012This is an indication of faulty ballast board and or its power supply(gone to out-of-regulation) and once sense by the feedback circuitry it will automatically shuts off the power supply. First check for bad solder joints (crack/cold/dry joints) in that section. This is hard to spot, I would advice you use table/portable lamp or work in the brightest area to locate it. Once found, resolder it. Also check for leaky/dried electrolytic capacitor. Sometimes it has a bulged at the top but not all, you must have a capacitor checker to determine its condition. Shorted driver transistor in the ballast board will do the same symptom as well as faulty ballast transformer.\015\012
\015\012Isolating the symptom is technical and if you don't have necessary tools and test instrument and can't do the job yourself, I would advice you to look for a qualified technician to troubleshoot the problem.\015\012
\015\012Hope I helped you.\015\012
\015\012Have a nice day!\015\012
\015\012Thanks for using Fixya.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

The picture flashed green to black several times and the image went askew. Then everything went black and stayed that way. Sound remained on. After a few minutes, I tried to turn the unit back on and it did the white up and down lights ending with the two top lights on (now red). I have changed bulbs twice before when this happened and that fixed it. This time it didn't. One new thing that happens now (I know this is weird) is that when I turn it on the set chirps in the vicinity of the bu


Hi lc99527,\015\012\015\012This is an indication of faulty ballast board and or its power supply(gone to out-of-regulation) and once sense by the feedback circuitry it will automatically shuts off the power supply. First check for bad solder jo ... LG 62SX4D 62" Television

My Philips 26PFL5302D/37 will being working great then it will go black. For a few minutes it allows you to go to the menu but it will not allow you to turn the channel. Then it eventually just be black, blue power light is still on, and nothing will happen. I trying turning the tv off and unplugging it but I get the same power on but nothing on the screen. I wait half an hour or so and it turns on and works again. What do I do to fix this???


Hi,what makes the TV malfunctioning this way is because the TV is overheating....Overheating might be from capacitors or IC inside the TV set...To fix it, you will need to check the capacitors or IC if the dry joint soldering of th ... Flat Panel Televisions

I have a Mitsubishi DLP WD-73737. Two days ago it worked great. Today I went to turn it on and the green power light flashes but the screen stays black like it is still turned off. Eventually the green light stays on but then a little bit later the tv just turns off. I'm not sure if it is the bulb. Holly


It's not the bulb. Google Mitsubishi WD-73737 blink codes. The blinking light is a self diagnostic tool and each blink code represents a certain problem. ... Mitsubishi WD-73737 73 in. HD-Ready TV

Our Sony picture came on one day & after a few minutes the screen went black, the sound was still there & the stand by light was blinking away. After waiting awhile we can still turn the t.v on, the picture will apear, but after about 3-4 minutes the screen goes black with the sound still going as well as the blinking of the stand by light. It this something that easily be fix, or time to get rid of the tube & on to the flat screen. I really hate to see it go cuz we really - really love this t.


Often it is cold solder in c-board. have you tried to re-solder it..in few years of using your t.v it is normally electronics parts heats-up..then it will loose it contact from the base board or the PCB.if you have a basic electronics knowledge ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Vc3207 v7 tv/combo dvd player, turn on tv, worked, changed channels, worked, when back to orginal channel, stayed on for a couple of minutes then the screen went black, the little red light came on. tried turning tv on manually , nothing happens. unplugged tv from wall, after 5 miutes repluged , still the same, nothing works except the little red light in front. regards brian


... Combination Televisions

42LW6500 It's happened once before but it happened at turning on. Today while watching TV the screen went black, no audio but power light stayed on. Last time when I turned in on the next day worked fine and has done so until today. Any suggestions?


... Flat Panel Televisions

I have an old Toshiba CF27E50 chassis no. TAC 9515 that has had no problems until last week. I went to turn on the power and the red light flashes continuously, but the set does not turn on. I have unpluged the set for an hour and tried to turn it on again, but the same thing happens. I have tried to turn it on using a universal remote and using the power switch on the front of the set. Can this be fixed or not?


This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 2 ... Toshiba 27A44 27" TV

Rca l42wd22yx5 Turned it on green light came on but no picture it flashed like it was trying to come on then the green light went out then red light started flashing what happened and can it be fixed


... Flat Panel Televisions

I have a Runco RS 900 projector that will run for a few minutes and then the bulb light turns red and the video goes dark. It does not do this every time, but most of the time. It will sometimes go a couple of weeks functioning properly and then do it again. We have replaced the bulb twice and it still happens. Does anyone know what this might be?


... Flat Panel Televisions

While watching tv the entire screen went black and there is no power. I try turning it on and turning it off but nothing happens no light nothing, what could be wrong?


This will be 6 capacitors that are 3300uF 10v that need replaced with 3300uF 35v to avoid them popping again. They will be located in the upper right of the power supply if you are looking down on it! Because of the short you may also need to replace ... Sanyo DP50747 50 in. Plasma TV

I have a 42lg2000 , and all has bin good for 2 an a half years , went to switch on today and standby light now flashes twice before turning blue and have no picture or sound , blue light flashes when buttons are pressed on remote but nothing happens , please help :-)


... Flat Panel Televisions

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

My screen won't come on, however the blue light does come on to show it has power. Sometimes the screen just stays black, other times it seems like it's going to turn on but doesn't, meaning the screen lightens a little but it never fully comes on. This happens intermittently; when I unplug the power source for a small amount of time it sometimes fixes the problem and the screen comes on, however it often takes several tries. Periodically it just comes on right away. Also the remote frequently s


Mi tv no tiene imagen ni aparese el menud esta blanca sonido tiene y se escucha bien. ... Element Electronics FLX-2610 26 in. LCD HDTV

OUR TV WILL COME ON FOR APPROX. A MINUTE...THEN THE PICTURE WILL TURN BLACK, BUT THE SOUND WILL CONTINUE FOR A FEW MORE SECONDS BEFORE SHUTTING OFF AND THERE ARE 3 LIGHTS BLINKING ON THE FRONT OF THE TELEVISION. WHAT COULD BE THE PROBLEM. WE RECENTLY HAD A BAD STORM AND THIS ALL HAPPENED AFTER THE ELECTRICITY WENT OUT.


A power supply section problem is what your experiencing which is a part of your television set. A defective MOSFET or switching transistor could be a problem that holds the power of your television. This is a very fast switching component which is v ... Flat Panel Televisions

Screen went black. replaced with a new bulb. will not come on. the power flashes twice with a red light then nothing


After lamp replacement, you must reset the lamptime. Refer to the instructions enclosed with thelamp unit (Part No.: TY-LA1000). ... Panasonic PT-44LCX65 Television

The TV was turned off; and when it was turn on later, the green light blinked (while with only black screen w/no sound, or bulb illumination front/back of unit); and shortly afterwards the status ligh


Lamp is possible----\015\012Mitsubishi TV troubleshootingHere's somet ... Projection Televisions

I have a WD 60735 replaced the bulb as the light was red but now my timer light flashes green when you turn the tv on than goes to solid green you can hear the sound, turn that up and down but the screen is all black and you can not change the inputs. The bulb light did come on red once. I have pushed the reset button but still no picture. Any suggestions


... Mitsubishi WD-62525 62" Rear Projection HDTV

I just replaced the bulb about two months ago, it worked for a month and then stopped working again the lamp light flashes and the blue light stays on, it turns on and off about 8 times, then says I am not working when i try to turn the power on. this is what it did the first time the bulb went out.


Faulty socket... ... Flat Panel Televisions

Light bulb I have a Toshiba DLP TV and cahnged the light bulb after white dots (about 4-9) started to Appear on the screen. After the light bulb was replaced i turned the TV on and there more dots on the screen about 100 of them. Is there anythng i could do to fix this?


White dot for DLP Projector TV is not because of the light buy. It is caused by aging DLP chip ( DMD Chip.) Your TV DLP Part should be the following image: ... Projection Televisions

We bought this tv an Olevia 542- b11 Syntax brillian lcd hdtv, back in 2009 and have not had any issues with it other then every now and then the volume would go out. we would just have to turn the tv on then off again and we would have volume.But last night b4 we went to bed we turned off the tv and now the standby light is not on. So we un plugged it put it back in flipped the switch in the back of the tv and the blue light turns on for half a second then turns back off.So what has happened to


... Olevia LT42HVi 42 in. LCD Television

Lg 52sx4d turned tv on-picture but no sound. shut tv off, unplugged for a few minutes, plugged back in and turned on-nothing. white lights scrolled bottom to top for a minute then top light went red and second light blinked red a few times. replaced bulb, nothing changed. no fan sound or clicking noises, just the light sequence.


Hello\015\012Power supply switching regulator board inside your LG TV is faulty. There are more than 8 regulated supply rails emerges from that board, after switching regulation, which will enter to different sections of circuits in your Tv. ... LG 52SX4D 52" HDTV

No blinking lights, screen goes black, sound is still on, standby light flashes tv turns off lamp light flashed tv turns on and it happens every 2 minutes what's up


Need new lamp ... Samsung DLP HL-P5663W 56" TV

Hello - i have an LG Rear projection television model: RT-56NZ23RB we purchased the tv around 2004.. The red light on the tv comes on but there is absolutley no picture or sound coming from the tv (wont come on !). Usually when the red light on the tv is on - we use the remote to turn it on - so the light turns green but this is not happening at all , cahnged batteries in remote etc... what could be the problem and how much would it cost to fix ??? many thanks sue


Replace the Power supply/Deflection Board .\015\012Zenith Exchange Moduels 1-800-844-7871\015\012I use this company ,to change out zenith boards . Its cheaper in the Long run.\015\012The board I am talking about is the one with the ... LG Projection Televisions

Sony KDS-R50XBR1 /(2005) Red stand-by light blinks 4 times.Tried new bulb (Philips) 1 week ago ,same problem as before .Whole new light engine replaced two yrs ago by sony.What happens is it will turn off on its own the odd time or not turn on sometimes.Red light will blink 4 times.So far after waiting or pushing the TV power it does still works.Is there a more frequent failure part that will cause this?Short of the whole engine? I still love it ,my wife says buy new ?


The error code of 4 blinks indicate a fan problem.the fan is slowing or internitantly stoping. the fan is stallling. or the fans not getting power. Always rember anything that moves will eventally stop. this fan is on all the time. also there mor ... Sony KDS-R50XBR1 50" HDTV

TV screen went black then turned on stand by. We tried turning it on then is shuts off. Now, we turn it on and the screen is black then goes to stand by with the red light blinking.


... Sony KDL52V5100 52 in. LCD HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2402 seconds