Suggested Questions/Answers :
It is recommended you read all this kind of situations
When switching from tv to fox my tv displays, hdcp support not being detected from your tv, this disappears and the sound and picture are fine but then without warning the warning comes up again and we lose the picture and are left with a no signal warning on the screen, this can last for hours or sometimes a few seconds and the connection seems to to made again. this happens all the time, ive checked all the connections on the back of the tv, the reciever and the fox box which by the way i got
LG 50PK550 50 HDTV Plasma TV
Produtools.com my diboss tv has sound but no picture only black screen after warm up it starts to show a skipping picture image I just recently got hooked up to the internet and had a cable connection installed it was from this time that my trouble seemed to start peter model no l t 261 HMF 24 v there seems to be a small image on the left hand lower side of the screen with 3 tiny green lights on it
Flat Panel Televisions
Mitsubishi WS-65809. Yesterday, plugged into the wall in the first outlet, I powered off my modem and computer (trying to get Cox to fix my internet connection) that were attached to a power bar in the second outlet. TV was turned on. Once I got my internet connection working, realized that the TV was no longer turned on, and would not turn on. Made sure plug was seated right, but no dice. Checked the outlet to make sure it was working, and sure enough it was. Plugged the TV to another outlet, n
Hi mikalkintner,\015\012\015\012Is your tv haven't a led light in the front panel? I need to know to assist you further.\015\012\015\012Jdvillanueva ...
Mitsubishi WS-65809 65" Rear Projection Television
I have just got sky + hd, the problems is since connecting it to my philips hd tv every so often the picture goes black, the sound is still there, the picture goes off for between 1 & 5 seconds, it can happen every 2 minutes or not happen for a couple of hours, i have had a new hdmi cable and a new skybox and neither has fixed the problem. it is the tv?
Philips 32PFL5403D/27 32 in. LCD TV
My sceptre tv picture comes on when I turn the tv on then within 15 seconds it goes black , I still have sound. I have checked all the connections and they seem to be good, I also unplugged the TV for 10 minutes anything think else you can think of is much appreciated
The power supply is failing ...
Flat Panel Televisions
Why does my Bush LED24970 DVDFHD television seem to seize up for a few seconds soon after being switched on. The picture goes pixellated and the sound disappears and then it all comes back on again. It has always done this since I purchased it in 2012. I have recently re-tuned it but that has made no difference.
Bush Combination Televisions
Hey guys i got the NEC PlasmaSync 50MP2 as a hand me down and hung it on my wall but cant seem to connect my dvd player to it ive tried multiple ways but still no picture. is there a way to change the channel?
You most likely need to change which input the TV is displaying. There should be a source or input button (on the TV and/or remote) which you should be able to use to do this. Just go through the options while the DVDlayer is on. ...
NEC PlasmaSync 50MP2 50 in. Television
Hi. my philips tv screen is allways green. at first when i turn my tv on it has got all colors and it seems normal. but after 5 seconds the whole screen goes green. it shows the pictures right but in green color. what might be wrong? the tv's model number is 26pf9956.
i have checked all capasitators and most of the resistors and cabels and cabels contacts and have not seen any broblems with them.
thanks for your answer!
Philips 26PF9956 26 in. Television
got this tv not working.
found no power when conected and decided to remove back cover.
found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking.
pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again.
what do you think?bad PCB or ba
Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ...
Philips 50PFP5332D 50 in. Plasma Television
I am having problem setting up my hdmi connection with my panasonic viera model TH-L32C10X2. i cant get it connected to my sony ps3. all cable connections are connected. set the tv to either hdmi1 or hdmi2. then tried setting it up on the ps3 console. but when i tried to change the ps3 setting to hdmi setting, the picture goes blank. and after 30 seconds goes back to its original picture. please advice what to do. thanks
I do not own a PS/3, but I will try to help just in case you dont get another expert at this late hour....\015\012\015\012It sounds like you need to save the changes on your PS/3. It is timing out and going back to default because the cha ...
Flat Panel Televisions
Hi-rn Thank you for being here- We were watching our Sharp Flat Screened TV, beautiful nice picture. We noticed when we hooked the cable up for Direct TV in our new home, the input connection point was bent and slightly loose. We attached the cable and everything seemed fine. Tried to move it back to the wall and the picture became distored w/ snow and it's saying 'analog' on the screen. Is there another way to connect it to the cable other than that particular connection point until we ca
With Direct TV, you should use the video input (composite video- yellow/picture, red/right stereo, white/left stereo)ORcomponent video- (green/video, blue/video,red/video white/left channel stereo, red/right channel stereo)t ...
Sharp Flat Panel Televisions
My LG 42 px11 plasma Tv made a craking sound and the picture got dark and fasy black and white with sound. by trouble shooting I found out the 6871QZH033A zsus board is blowen, so I replaced it and got all the voltages back agin ,but when truned it on, I got the same not sharp black and white picture and sound. what else may be bad?
LG RU-42PX11 42 in. EDTV-Ready Plasma Television
I have a Vizio VL320M. Have had long standing problem with TV picture & sound going off for 5 to 10 seconds. Have unplugged TV and held power switch for 30 seconds then plugged it back in. Does not do any good. Lately, I have had a problem with the HDMI input. The picture shrinks top and bottom. I have to go through HDMI inputs back to the original to fix it. Have checked connections. OK. Any suggestions?
Vizio VL320M 32 in. HDTV LCD TV
KDL-32S3000 Problem. We broke remote, so got a new one coming. However, The screen will be normal for 15 seconds or so and then a black bar will appear at top. On the left top of the black bar it will display the input in use "HDMI 1". To the right just under the bar #In the picture# it displays the picture mode "16:9 1080i HD". On the left 3/4 of the way down the screen it displays "Power Saving: Low". After about 15 seconds the screen will refresh and go back to its regular full screen. This k
Its asking you to adjust power on the main power box it sould be under power saver adjust level it to low it should be in your menue and then your main power setings. ...
Sony Flat Panel Televisions
Hi, I have a Sharp Aquos LC-19DV28UT given to me as a gift. I connect the cable from the cable box to the TV, give the remote the proper code, and the TV turns on OK. But then the picture flashes for a brief second, then the picture goes away. The sound is still there. Whenever I try to display any type of menu, it does not display. I tried the TV on 2 different cable connections that work with the current TV, and same problem. I have a feeling there's some setting I need to adjust, but c
Sharp LC19DV28UT 19 in LCD TVDVD Combo
I got sony TV model: KV-XJ29M50 PICTURE PROBLEM WHELL ON AT 10 SECOND THE PICTURE PROBLE M IN SCREEN LEFT AND RIGHT GOT BLACK IMAGES. CAN HELP?
Sony KV-XJ29M50 29" TV
Hitachi 55PMA550 I have a Hitachi 55PMA550 monitor linked to a skybox. The Hitachi goes on into standby mode on power up, I then use remote to start the Hitachi, the standby light goes green (start mode) & picture comes on in 3-4 seconds mormally. But now after 1 second (without picture) Hitachi goes back into standby mode of red light. I can hear sky tv sound (Hitachi linked thru sky to sound) and checked all cable connections, they are ok. Any advice would be most appreciated, thanks.
Hitachi 55PMA550 55 in. HD-Ready Plasma Television
Hi there i've got an lg50ps3000 plasma tv and when i switch it on by the power button i get a white screen at first for about 3 or 4 seconds followed by a fuzzy picture for about 2 seconds then it turnes itself off have you got any idea what the problem is thanks ....Dave...
How old is the set? It sounds like it may be a panel, Tcon or main board issue. The light you see is the backlight so we know the fluorescent tubes in the panel are getting the AC voltage. It is just not getting the video signal generated by the main ...
Flat Panel Televisions
I HAVE AN LG 42 PJ 350 R TV ... I HAVE MY PC CONNECTED WITH IT. YESTERDAY I BOUGHT NEW GRAPHIC CARD WITH HDMI PORT. I CONNECTED THE PC AND TV WITH HDMI ... IT DISPLAY WAS FINE THAN SUDDENLY AFTER FEW MINUTES THE TV GOT OFF BY ITSELF. THERE WASN'T EVEN STANDBY POWER. I UNPLUGED THE MAIN POWER AND TURNED IT ON AGAIN .... THE TV WENT IN DEMO MODE WITH A PURPLE BACKGROUND IN THE PICTURE... I TURNED IT BACK TO HOME USER MODE BUT ITS GIVING BACKGROUND SOUND IN TV MODE BUT THE PICTURE IS PURPLE... I A
I think from your mobile virus had entered in tv reset the tv ...
LG Flat Panel Televisions
Samsung 940N , picture OK, backlight goes of after 1-2 seconds.
Opened the monitor ,all capacitors seem to be OK, (no blowouts).
This part (AP4525GEH) - N AND P-CHANNEL ENHANCEMENT MODE POWER MOSFET , seemd to neated the board on the other side since the board is darkened(not a lot).Found it on www.alldatasheet.com , measured it and seems to be ok.
Surfing the web for a the problem found ot a "solution" for this "2second" backlight problem and they said if you have this "2 second" backlight i
Flat Panel Televisions
I am having problems with my Sony Bravia LCD tv model KDL-32L4010. When first turned on the picture looks good for about 30 seconds, then develops white vertical lines. After about 3 minutes, the lines fade slightly and the picture becomes more washed out. There is about 1/2 inch of good picture at the top. After, about 12 minutes the picture is no longer washed out but seem to have low definition. After about 20 minutes the picture begins to jitter vertically creating a double image. The menu
Flat Panel Televisions
Tv is lg 50PC5D. plasma 50" 2007 model
I've read lots of help and answer forums and this one seems to have good answers. I got the black screen with sound problem.
I was watching the tv when the picture stopped working. I did not hear a pop. I did see the picture "roll up" from the bottom to the top like somone pulled the release cord on a roll up blind.
From that point it happily turns on and off, and i can see the backlight coming on, but I have no picture.
I'm hoping the extra detai
LG 42PX5D 42 in. Plasma HDTV
Philips 37PFL5603D/10 tv, connected to Humax HDR-Fox T2 recorder.
We do not have the HD signal yet, but due in June this year.
Problem is with the HDMI connection, mostly does not work, sometimes green picture, no sound. Also does not switch automaticaly When box is switched on or off.
Will only switch properly when a scart lead is also connected.
You should not have to use a scart, when you have HDMI.
We need the HDMI to cope with the new digital signal when it comes.
Have switched Humax
Philips Flat Panel Televisions
I have a panasonic Viera television and it seems as though the picture is zoomed in, which cuts off the bottom of the picture and the tops of peoples heads. no adjustments were made to the tv, i turned on the tv the other night and the picture was zoomed in. i would love some help, thanks a lot.
If the picture only cuts of att the top and bottom, then use the V-size feature . Lower the V-size value to adjust it. You can also try changing the aspect ratio which can often be accidentally changed with the press of a button ...
Panasonic Viera TH-42PX80U Plasma TV
I have an RCA DLP tv model HP50LPW52. the sound was there with no picture. since it is 5 years old I replaced the lamp for the first time. got it all hooked up, turned it on and the tv slowly came on. shortly after that it started to squeal like a dry bearing sound.rnI thought cooling fan and pulled them out to check, they seem fine. got online started to read about the color engine or color wheel? I just paid $106 to replace the lamp. Now what should I do? I feel like its gonna cost as much
That is your Color Wheel that is bad. I wish you would have posted the problem before buying a lamp. I would have told you to treat yourself to a new set instead of putting good money into a DLP set that is 5 years old. ...
RCA Projection Televisions