Having problems with your Flat Panel Televisions ?

Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her. It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow. Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing. Brought in my old tv and hooked to Dish thou



Answers :

If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if this doesn't work and we can look into some other possibilities.
Daniel Busa
DISH Network
Customer Service

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her. It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow. Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing. Brought in my old tv and hooked to Dish thou


If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if t ... LG 47LD520 47 in. HD-Ready LCD TV

I have a LG 32LH30 TV. When I power on the TV I get a picture in the top half of the screen and vertical lines in the bottom half. Also I get a thin white dashed line across the middle of the screen. After about 10 minutes I get full screen picture. However the top third of the screen is lighter than the bottom two thirds. I still have the thin white line across the middle of the screen. I am using HDMI cables from my cable box. I also tried Audio/Video and Component cables. I took the back


... LG 32LH30 32 in. LCD HDTV

I have an LG 32LC2R TV. I was watching a DVD via that HDMI cable input and the screen just went black. There was power to the unit but no picture. Not sure about sound because I use sound from the DVD unit. I have looked on-line about help, but none really help. Can you give me some advise please? My TV is apart on my desk and I don't see anything out of the ordinary, no burned components etc.


Try the solution I posted (click HERE) and see if that helps!If not, post a note back here.If the link doesn't work, paste this into your browser navigation address barhttp://www.fixya.com/PostComment.aspx?thid=8624692&prdid=920509& ... LG 32LC7D Television

I have a VSX-920-K Pioneer receiver, a DV-220KV-K Pioneer DVD player, and a Sony CRT TV with no HDMI input but only a video component input. I connected the dvd player to the receiver using an HDMI cable (for audio) and a video component cable (for video) as shown in the receiver's manual. I connected the TV to the receiver using a video component cable. I have set the HDMI Control option of the receiver to "OFF" to enable the selection of the HDMI input in the Input Setup Menu of the receiver b


... Pioneer Flat Panel Televisions

My tv powers on and stays on as long as nothing is hooked up to it.as soon as you hook it up to a cable box or a dvd player(on any connection...hdmi,component,side...)it turns off.its very strange.again, it stays on as long as its not hooked up to anything


Dont know if this will help but it may be your main a/v board. I have a Sammy LCD and recently experienced similar issues. Tv wouldn't hold a picture or stay on. Once my tv would finally come on, any time I had something pluged in, in any input/wi ... Philips 42PFL5332D 42 in. LCD Television

I have a ws 48311 mitsubishi. it is stuck on 480, how to switch to 1080p? We got a new DVD player, and have a converter box HDMI to component, with component and hdmi cables. we cannot get a visual, no signal from the player. the old dvd player works. the new DVD player is a samsung model # 80-em59c


... Mitsubishi Projection Televisions

Have connected cable (white, yellow, red) from Conia DVD player to TV as component 1 and connected Sony VHS cable (white, yellow, red) to TV as component 2. What other steps need to be taken for the players to be recognised by the TV and how to move from watching TV to watching DVD or VHS? Thank you


Component video needs Red, Green, Blue to be connected on the DVD end and to the TV for video to display, also the Red and White audio out needs to be connected to the TV for audio to work . VHS has Red, White an yellow for Right Audio, Left A ... Flat Panel Televisions

I presume we had a power surge of some kind. The TV will not power up. All the components (TV, DVD player, VHS/DVD Player) that were linked to cable went out other components (stereo) are still fine even though the were plugged into the same AC power source. Is there any way to trouble shoot the issue without taking the unit in for repair.


You can only find out, if you can remove the back cover of the components not working. The best thing to look for, is to locate the fuses located in the power supplies of each component. If the glass fuses are open, and they are still clear, replacem ... Emerson LC320EM8 32 in. LCD TV

I have a insignia 26inch lcd flat screen tvmodel number ns-ltdvd26-09 dvd combo and i turn it on with no other hookups just power cord ..and it powers up goes to blue dvd screen if i dont touch it it will stay on 20 60 seconds then powes off it does it every time ..and some times wont even come on ...and for the few seconds it does the screen is white with fat lines in it ...i look for a blinking diognostics light but have never seen it blink when tv is on stand bye the power light dont blink ..


... Insignia LCDTV26 26 in. Television

Sharp power My son has Sharp LCD TV model LC_32SH130K, we are trying to connect his HD PVR but it needs 5 component slots, red, blue, green, another red and white but at the back of the tv I can only see 3 component slots, red, white and yellow. Can you please advise me on how I can connect it? I am not very technical, so please keep it simple, thanks.


... Flat Panel Televisions

I have Philips satelite receiver DSR8121 with output scart (CVBS or RGB); HDMI/HDCP and composite. will connect to Yahama RXV367 amp. with HDMI in/output; component in/output and composite in/output. will connect to Samsung PS42P2ST plasma screen with pc input; scart video or RGB; s-video and composite input. I like to have optimum resolution (HDMI or component). How do I connect with or without converter(s)? I like to switch DVD with similar output on the Yahama Thanks in advance. Regards


... Samsung PS42P2ST 42 in. Plasma Television

I have an LG LCD TV...model #52LD550-UB.AUSMLFR. Was working fine last night, turned on this morning to a massive white screen. It still has sound, just on a white screen. I turned on the surround system and have picture on that using the AV1 component, but nothing when using the HDMI1 component. Tried changing the cable, thinking it was the HDMI cable that went bad, with no change. This TV is only one month old. Help!


... Flat Panel Televisions

27" flatscreen apex tv. No power. Try to turn on & nothing happens. No lights on tv to show if on or off. Is connected to dish TV, a DVD player & Vhs player. I connected it directly to wall, s


Other than the fuse that is inside the set---replace the set if not real expensive---Every Apex set I have seen no parts were available. ... Apex Digital LD4088 LCD TV

Have isolated problem to vhf/uhf connection point. white lines flash in pic. w/a popping sound & if they stay for very long there is a buzzing as in over white or over modulation. problem shows when cable signal is fed direct to tv or thru vcr to tv. other tvs do not exhibit same problem so it's not the cable. have tried other ac outlets & same problem. other inputs; dvd, vcr work fine. cable signal thru vcr tuner fed to ht processor is fine but that is fed via component inputs to tv. sony has b


Hi,Problem seems with main tuner in this tv as other AV inputs working fine so please replace main tuner (TU2) to solve this issue.There are two tuners mounted on A board TU1 and TU2, please replace TU2 and part number would be written on ... Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

The coax input on my tv is broken off how can I connect the cable to it other than the red white and yellow cords which don't have a good connection either I have my dvd player hooked up to hdmi is there a way to hook the cable up using the hdmi cord without a cable box just the line.


Hi, unfortunately the only ways to get the signal to the tv is with either coaxial, the red white and yellow rca cords, or hdmi and also the " RGB " inputs, also called "component video input ". some dvd players have component video outs-that could ... Samsung Flat Panel Televisions

I bought a Phillips DVD and am trying to connect it to the tx32lxd70. I have sound and no picture. The DVD has no HDMI so I am using component video jacks and audio cables. Everything is plugged in properly.....


Hi,Component video will work if you turn On Progressive Scan function in dvd player. Usually P-Scan function can be turn On through Menu or some dvd players has push button on front panel.If your dvd player does not have push button for P ... Panasonic TX-32LXD70 32 in. HD-Ready LCD TV

My LG 60PZ550 Plasma HDTV turns on sporadically when connected to my U-Verse STB via HDMI cable. This does NOT occur when the STB is either disconnected from the panel, or when connected to the panel with component video cables. No other HDMI device (ie: Blu-Ray player, DVD player, HTiB) seems to exhibit this issue with the panel, only the U-Verse STB. Any suggestions?


Reset the uverse box. try resolution output settings from box. reseat the hdmi with tv and box. ... Flat Panel Televisions

My Samsung tv won't recognize the hdmi connections for my phone or DVD player. it used too but stopped first the DVD player and now my mobile phone. I can't check to see if it recognizes my lap top anymore as the laptop is being repaired at the mo . it's q Samsung tv. model UE40D5500. it's telling me check connected devices power, cable connection, and source selection. help its driving me nuts.


... Flat Panel Televisions

Suddenly my HMDI connection soes not work? Tested cables and they are fine. Component signal from DVD is fine. Imputs are fine- Tested other DVD player and it also no signal- I have two HDMI ports and neither worked. What is up? What can I do?


... Panasonic TCP42C1 Plasma TV

Only 1 hdmi outlet on TV . I have a high def cable box and a sony blue ray dvd player. How do I connect 2 hdmi cables fron the components to the tv?


The proper solution is to connect both devices to the television using an HDMI switch. Go to amazon dot com, search for "hdmi switch", filter the search to keep only 4-5 star rated devices, and then select one with more than 100 ratings (to keep them ... Sony BRAVIA KDL-40S2400 40 in. LCD HDTV

My 50' Vizio flat screen, VP50 HDTV10A, powers on, but I get "no signal" in a blue box, and all buttons except power button on TV are unresponsive(volume, channel, input). I have no remote, and couldnt successfully set up a universal. I tried hooking up different inputs(HDMI, DVD) but nothing. I just want TV to watch cable. What's wrong and how can I get it on?


... Vizio Flat Panel Televisions

Have a Samsung LCD. Beautiful picture thru HDMI. Any component playing thru AV1 rolls like an old TV with vertical hold problems. Wii, PS2, and DVD player all connect thru switch box and roll. on


Format or color system incompatibility, loose contacts in cable, RC jacks or sockets. Connect a DVD player in that input and try. ... Samsung Flat Panel Televisions

I have a mitsubishi ws-55315. Only the Composite 1 inout and monlink input with an hdmi adapter work, and only with certain components. the monlink works with my Dish reciever, and my xbox 360 work on the comp 1 input, but my ps3 doesn't work with either. I have picture with it, but the upper right hand corner is completely out of whack with a serious distortion and convergence issue. What is this?


Normally I would provide you with the 4 digit code to reset the entire set and restore all inputsI am away from home and do not have the information here===these sets have three hidden service menus==one for adjust, one for convergence and th ... Mitsubishi WS-55315 55" Rear Projection HDTV-Ready Television

My tv shows pink hues where there should be white and people's faces have odd glow to them. I can correct this mostly by adjusting the color temps. I've tried both HDMI and component cables


... Vizio L37 Television

I plug the white, yellow and red cables from the dvd player into the back of the tv but it says "no signal". I changed the input to Component 1 then I tried the other plugs too but still get the same thing.


Please check DVD output pin TV input pin ---red to red,white to white,yellow to yellow ... Apex Digital LD4088 LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1519 seconds