Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a LG 42PG6010 that will not let me change inputs, also when swithed on the green power light flashes 5 times before set comes on to digital tv. It will not change to Sky when box switched on and as stated I can not change through the AV input button although the graphic comes on screen allowing me to select AV1 (sky input) but on presing OK it freezes on screen, I then have to switch off and back on again. the other thing is it takes 20/25 seconds to switch off.
LG 42PG60 42 in. HD-Ready Plasma TV
I have no picture but have audio. Problem occurs AFTER playing games on a Sony Playstation. After you get done and switch from the Input from the Playstation to Digital TV you get a blank screen. If you do not change inputs and just watch TV the problem does not occur. When this first started happening if you hit the side of the TV the picture would come back. Now its gone for good. TV is only a few years old.
Hi jgslote,\015\012\015\012This is an indication of bad solder joints in the I/O board section where the DTV cable connected. You have to re-solder this cold/dry/crack solder to cure the symptom. This is hard to spot, I would advice you to work ...
Sony BRAVIA KDL-40V2500 40 in. LCD HDTV
Hi there I have recently bought a Panasonic Viera 32", I have installed the Sky Box and Bush VCR/DVD Recorder Combi correctly but when I turn onto AV2 and switch on the DVD player the screen comes on but is bright green! I have tried all suitable tuning methods and have been through the installtions time and again and checked all cabling but it will not change, it can't be the Bush Combi as it worked perfectly with my previous Samsung set, this is really frustrating, I can't see that it is a fau
Panasonic TH-37PX50U 37 in. HD-Ready Plasma Television
After watching for about 10 to 20 minutes the tv does something weird like your'e pressing the input button. It keeps switching from tv to vidio or whatever else happens when you press the input button. When the screen keeps switching like that it just goes back and forth so your picture keeps coming on for a second and then back off. If you try to press the input button to fix it nothing happens. You just have to turn off your tv. It has its own dvd player on the bottom. I'm wondering if that
Westinghouse 46W1HD 46 in. LCD TV
I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!
Flat Panel Televisions
My LG flat screen tv is losing HDMI signal then goes black. I've tried to change to a different input but it won't change. After a few minutes of black screen it starts to flash a few times then back ti black. A few minutes later it will start connecting again and picture will come back on. Is it the tv or maybe my direct tv reciever
I have the same trouble too any fix yet ?? ...
LG Flat Panel Televisions
I have LG LCD TV Model No: 22LF12R. The problem is the TV fell face down when it was still powered ON. Now when you switch it on the power LED comes on but there is nothing on the screen. When you press the remote control the LED responds or it blinks and when you power off on the remote it goes off and when you power on it comes on. The problem now is there is no display on the screen. There is no voltage in the display unit. Which components shoul I change. Hope u reply soon.
In my experience, there will be damage to the main pcboard, usually under the transformer.If you are lucky you can find all of the broken track and remake the track.Good luck. ...
LG Flat Panel Televisions
I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.
Gateway PLSM46TV 46 in. Television
My 23pf9966 doesn't recognize the HD cable input (no cable picture). I can change the channels & volume, but all channels are just snow and no sound. There is one channel that is blank, but no volume control comes on. Just a black screen. The channel seems to change, if it's the blank one and I count up 2 channels, then go back, it will be snow again. What is going on??
The tuner - the part that actually selects the channels from the signals on the cable - has failed and it will have to be replaced.\012\012\012This involves careful desoldering of the old part, the purchase of a compatible replacement and its v ...
Philips 23PF9966 23 in. HD-Ready LCD Television
My LG 42LM620T Led tv has sound but no picture, what could be wrong.?
One day, while watching TV suddenly the picture went off, but there was still sound. Thought I might have pressed some thing remote, tried all options but nothing worked. Switched off, removed the plug but still no change. When switched on I get LG log and picture for a second and then goes off, only sound stays. Tried with different inputs still the same. When flashed light on the screen I could see faint images. Opened up th
LG 42LM6200 42 in. 3D LCD HD Cinema Smart TV
Had this TV for a couple of years now. We bought it new.
It has started switching itself on and off standby.
When you press any button on the remote control the screen goes black then comes back on again a couple of seconds later
Cannot turn volume up or down for this reason
Cannot access the in-built programme information
We could switch to HDMI and watch things on the playstation last night, but now it has stopped allowing us to do this too.
Changed batteries on remote
With no make or model, it is a little difficult to try and decide what the problem might be but, I would disconnect the touch button panel on the TV, if it has one. That could be the fault. ...
Flat Panel Televisions
I have a samsung 320px monitor that will not switch from AV mode, the remote will not operate the monitor . The only buttons that work on the monitor are the power button & input , the input screen comes up but the arrow buttons on the monitor dont work either
Hello\015\012The remote may not function properly when you turn off the remote function or disconnect the RS-232 cable or exit the programme in an Irregular manner. Return the programme and turn the remote finction again to Restore normal func ...
Samsung Flat Panel Televisions
Pioneer PDP-5010FD 50-IN 1080P Plasma HDTV; The power comes on but the screen remains blank and no volume. Able to use MENU and DISPLAY buttons on remote control, as well as change the INPUT channel.
Pioneer PDP-5010FD 50 in. Plasma HDTV
When i turn on my sony bravia tv the green power light comes on but the screen stays black. no remote functions work, i can't change the input. do you know what this problem is and how to fix it?
Sony Bravia KDL-40S4100 40 in. LCD TV
Toshiba regza The menu to change the scart preference comes up on the screen and flicks through the scart options on its own, so we are unable to watch the tv. The only thing we have plugged in is the sky scart
Look for any jammed buttons on remote or on control panel. ...
Toshiba REGZA 42WLG66 42 in. HD-Ready LCD Television
I have a WD 60735 replaced the bulb as the light was red but now my timer light flashes green when you turn the tv on than goes to solid green you can hear the sound, turn that up and down but the screen is all black and you can not change the inputs. The bulb light did come on red once. I have pushed the reset button but still no picture. Any suggestions
Mitsubishi WD-62525 62" Rear Projection HDTV
I have a philips 50pl9220d/37 tv the sound works the screen is black but the bar at the top when you change the channels comes on, a tech told me it as the video processing board. my brother in law bought this same tv at the time we did and his bulb went out so he gave us his can you tell me which is the video processing board so we can switch it out?
Philips 50PL9126D/37B 50" DLP TV
Was watching tv. Distorted picture froze on screen. Unplugged, now picture won't come on at all, nor will the menus and I can hear the sound perfectly. Can tell the TV is changing inputs, but alas, no picture.
Hi bkevryday, \012The main reasons of your problem is the bulb which is\012already came to its end. But before you rep ...
LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television
My tv is about 2 years old, lately when I switch on the TV (it is in TV mode) no picture come out of the screen but the red light changed to blue & it stays there. Please assist. Thanks HH
The problem is picture tube so please change your television picture tube then it will work ...
Flat Panel Televisions
Hi i have a Humax Foxsat HDR 320 Gb
I've been having problems for a while with an error message coming on screen stating "Poor or no signal" this can be after i've been using it for a while or when i change a channel.
If i switch off at the plug and it reboots it will normally be ok.
Hope you can help
Hello\015\012If your Foxsat does not receive any signals, do the following.\015\012\015\012Unplug the Foxsat-HDR from the mains and unplug the cable from your dish which is connected to the LNB IN\015\012connection. ...
Humax Flat Panel Televisions
I have a SOYO Atlas Series DYLTO32C. The power light goes on and I did have sound until I pressed the button on the remote that would change the input. The screen is black. The menu does not come up.The tv was purchased in August 2006
Soyo DYLTO32C 32 in. LCD HDTV
My LG- LCD TV has stopped working , This started almost a week ago when i switched on the tv the full screen showed a dull light with several vertical bars and one of the bars is moving slowly from left to right continously .i decided to switch it off .
I stopped switching it on BUT yesterday i tried to switch it on and realised some changes as the audio was clear but half of the screen was was white in colour and with few bars - these changes
LG Flat Panel Televisions
Remote sensor on tv not responding
I,have to turn on tv manually. change input manually,tv reception is ok. Volume cannot be controlled,it will lock in at full volume or drift back & forth,mostley full volume. If I use volume buttons on tv , it changes input (video 1 pc hdmi & so on) Once in a while setup screen will appear then disappear. I have changed batteries in the remote, I don't believe this is the problem.When tv is first turned on the volume icon at bottom off screen will go from 0-60
Have you checked your remote to see if its working? If you have a digital camera or camera phone, point the remote at the lense and see if it shows up on camera screen. If it is working then the IR sensor on the tv could be bad. ...
Sylvania LC420SS8 LCD TV
AT NIGHT, TV SWITCHES ON AUTOMATICALLY AND CHANGES FROM SIDE AV TO OTHER OPTIONS, I.E. PC / HD 1 ETC. LAST NIGHT TV SWITCHES ON, CHANGED TO HD1 AND TURN VOLUME AUTOMATICALLY TO 0. CAN'T GET VOLUME UP. WHEN I TOUCH VOLUME BUTTON ON REMOTE AND/OR TV, TV CHANGES FROM SIDE AV TO HD1 OR OTHER. HAVE PROBLEMS FOR 2 WEEKS THEN STOP, THEN STARTED AGAIN. SOMETIMES WHEN WATCHING TV, VOLUME SCREEN APPEARS ON TV SCREEN AND TURNS DOWN AUTOMATICALLY.
What you describe is almost impossible ..the only explaining is someone with a compatible remote control messing around with you ..so ...pay attention ..and after that if you are completely sure that this is out of case...Leave a comment and I will ...
Philips 42PFL5332D 42 in. LCD Television