Having problems with your Flat Panel Televisions ?

TV wont turn on sometimes. push the on button, light turns from red to blue but no display or sound. If I disconnect the power cord for 15-20 min and plug it back in to the tv it will turn on and stay


\015 Power light is on and turns from red to blue when pushed. no picture or sound not even input screen comes up. screen stays black does not turn blue like it does when it does work.\012If I disconnect power cord from TV for 15-20 mins, then plug it back in. The TV will then turn on. If you plug it back in sooner then 15min it will not work.\015

Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

TV wont turn on sometimes. push the on button, light turns from red to blue but no display or sound. If I disconnect the power cord for 15-20 min and plug it back in to the tv it will turn on and stay


... LG 42LG30 42 in. LCD HDTV

My Toshiba powers off every few mins and will not turn back on until i unplug the tv and plug it back in. Will only stay on for another few mins. The long its unplugged the longer it will stay on up to ten mins now. Previously only did this when I turned the tv off then back on immedietely. Removed front panel and placed a fan there in hopes the the heat syncs are now being over worked. Still shuts down every two mins.


It sounds like you have a bad capacitor. When one is faulty, they will demonstrate this type of behavior. The issue is finding out which one. If you are not a skilled technician, this is a difficult task. I would recommend that you take it to a TV re ... Flat Panel Televisions

Our Hitachi 42HDT51 monitor has been shutting off, however the lights on the panel and AVC box have remained green. There is no picture or sound, the screen is black. If I unplug the power cord from the back of the panel for 5-10 min. It will turn back on. Sometimes this lasts a few minutes, other times it will remain on for hours until we decide to turn it off. Once we turn it off, we go through this when we try to restart it. We have eliminated the Satellite receiver to rule that out as


Hi,\015\012\015\012The symptom has no issue on the input (channel reception) because the problem is internal and caused by leaky/dried electrolytic capacitor in the power supply section of your tv. It will prod ... Hitachi 42HDT51 42 in. Plasma SLC1551AW

Hi. I have a problem with my 42 inch plasma tv,when tv is turned on green L.E.D appears on bottom right and tv works as normal.After 40 minutes to an hour tv makes click sound and screen goes blank the green L.E.D changes to red on the bottom right there is still power going to the tv hence the red L.E.D.Then when i plug it out and plug it back in red L.E.D appears but screen remains off it stays like this for 3 to 4 hours before tv comes back on and the same is repeated again after 40 minute


Hello,\012\012A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.\012\012You will see roughly around 9 x capacitors that are bulged / domed shaped on ... Projection Televisions

When I turn my TV on it will turn off by itself in about a minute and the red power light on the front of the TV will blink. The remote control nor the power button on the front of the TV will turn it back on. I have to unplug the TV for a few seconds and plug it back in to make it come on. It usually takes two or more of these unplug and plug back in sessions to get it to stay on. Some times it takes up to fifteen before it will stay on. Please help.


This is what 's happening: you give the command to start the tv so the power source is initiated and starts to deliver power to the rest of the components of the tv; one of these components has aged and it requires much more current than normal to st ... Toshiba TN55V71 55" Rear Projection Television

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

I have a lg 32lc5dc that powered off by itself and now when i unplug it or turn it on with the remote the remote no longer works and i have a snowy screen. It will not power off when i plug it back in it just comes right back on, every once in a while it will stay powered off when i plug it back in and the remote will turn it on but then the remote will not do anything else. i have changed the batteries and used the reset button on the back of the tv i dont know what else to do


Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes fro ... LG 32LC5DC 32 in. LCD HDTV

I have a Proview rx-326 LCD tv that gets no picture or sound. If i unplug the power cord then plug back in, tv will start normally. After if has been turned off for a while, then the problem reoccurs and I have to unplug it again. Now, i sometimes have to unplug and plug it in a coupld of time for this to work.


... Flat Panel Televisions

Sanyo DP46849 my Sanyo DP46849 47" television wont stay on or power up all the way just keeps turning its self off and on I've tried unplugging it, changed wall plugs, and even disconnected all cords and wires still wont stay on and wont let me do anything how can I fix the problem with out giving up my left arm for the repair


The power supply is failing ... Sanyo Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

Sanyo dp50747 TV turned itself on and will not turn on. The green power light located on the front panel lights up and the side panel off/on works but no sound or picture is shown. The front panel green light stays lit. The TV did this again about one month ago but I just turned it back on. Yesterday, it turned itself on and now does not turn on with the sound or picture shown. There is no sounds or odors from the TV. The power outlet works fine and the TV appears to be getting some power


Sounds like a mainboard problem ... Sanyo DP50747 50 in. Plasma TV

I have a Vizio VP42 HDTV (inside says LG PDP42X3U400). One day I turned on the TV and heard a pop. I took off the back of the TV and inspected the main power supply board (P/N 6709900019A). Capictor C802 had totally blown up. The tv would not power on at all. I removed U801 and when plugging in the AC cord I heard two relays turn on and then back off after 1 to 2 seconds. I gave up troubleshooting that board and bought a new power supply board. When I installed this board and plug in the


If Va and Vs are missing even when the Y-sus board is disconnected from power board then the new board is defective - return it. On the original one the board is shut down (the relays are disconnected) because there is still a short on one of its out ... Flat Panel Televisions

Vizio VP322. Replaced 3 bulging capacitors on power supply. TV worked great for about 2 days. Now it wont turn on. The Vizio is lit up orange on the bottom but thats it. If I unplug the wiring harness going to the input board the screen will light up black but goes back out as soon as plugged back in. If I unplug all but the AC power cord I get 5V off power supply on one and 200 on both VS and VA. I'm not detecting power at those when all harness are plugged back in.


... Vizio VP322 32 in. Plasma TV

Sanyo DP42746 TV - I get the black screen and no sound (like many others). What I've tried so far, 1)checked all the fuses, 2) Checked PWB input and out (118 vac), unplugged the power cord waited a few minutes and plugged it back in. I get the click when I turned it on and a few seconds later another click. Then, the error led blips 12 times (Time Out error). Any ideas Matt?


... Sanyo DP42746 42 in. Plasma Television

Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.


... Sony FWD50PX2/S 50 in. Plasma Television

My television just went off! We tried to turn it back on but it wouldnn't come back oh. Finally the button flashed red like it was trying to come on and we heard 2 or 3 words then that was it.then the blue power button just kept flashing. we like to never got it to turn off. Its a 50" hitachi flat screen plasma model # 50H401A. Someone told us it may be the power supply the power cord plugs into on the back of the TV? TV is 2 years and 5 months old.


For more info on this set please check out http://www.hometheatershack.com/forums/hitachi/38229-hitachi-p50h401-le ... Hitachi P50H401 50 in. Plasma HDTV

50pfp5332d got this tv not working. found no power when conected and decided to remove back cover. found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking. pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again. what do you think?bad PCB or ba


Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ... Philips 50PFP5332D 50 in. Plasma Television

TV turns itself off after about 5 minutes (green light remains on). I can turn off the TV and turn it back on immediately, however, the TV turns itself back off after a few minutes. It started turning off itself off after displaying harizontal shock waves like lines on the screen that got progressively worst. Now there is no line, just powers off. Once turn back on shows great for about 5 minutes then clicks off (no picture or sound) with green light still on.


Check and make sure your fans are working and there is sufficiant cooling to the back of the set. Sounds like it is overheating and going into protection mode. ... Mitsubishi WS-65513 65" Rear Projection HDTV

Viore PD42VH80, had the power go out and come back on quickly, 3 times. since then, there is just a clicking sound from the tv when it is plugged in, will not turn on though.


... Flat Panel Televisions

My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously


Try checking the standby mode. . . ... Flat Panel Televisions

I picked up a Sony KF-60WE610 rear projection tv and when I got it home and plugged it in it would not turn on. I later noticed that the power cord was badly damaged in an area with exposed wires. I cut the cord and spliced it back together bypassing the damaged section but it will still not turn on. The power standby light blinks red 3 timesaver first and then 4 times there after. Any ideas on how to fix it?


These blinks indicates a fault inside the circuit of your TV. These are known as blinking codes, technically. Form the number of blinks occur at one time switch ON you can get an idea about the faulty circuit section inside it. If you wish to ... Projection Televisions

I have a Vizio Plasma TV model VP50HDTV10A (3 years old) that just shuts off. The only solution to restore power/visual viewing is I pull the power cord, let it stand for 2-to-3 minutes, plug power cord back in and turn it back on. Sometimes that works but most recently even that hasn't been working. Any suggestions?


... Vizio P50HDTV10A 50 in. Plasma HDTV

Our BenQ tv was given to us by a friend because he was having issues with it and didn't want it anymore, so we don't have a user manual. Approximately 10 min after I put the tv on, the screen will go black but the sound remains on. No picture but sound remains. The only way I can get the picture back is to turn the tv off then on again. This will sometimes happen up to 7 times within a 15 min time period and will eventually stay on again after I've been turning the tv on and off, on and off,


... BenQ DV2680 26 in. HDTV-Ready LCD Television

Hi, I have a 27 inch Dynex LCD TV model: DX-L26-10A manufactured (June 09) I've been using it for tv as well as an external display for my mac with an HDMI cord. The tv was working fine yesterday, then when i came to turn it back on there was sound from the TV, but no visual but my direct tv's 'please wait' then black. nothing and a high pitched frequency sound everytime i turn the tv on. Does anyone know what the problem could be? I've tried unhooking/rehooking the cords. still i get that so


... Dynex DX-L26-10A 26 in. HD-Ready LCD TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2071 seconds