Having problems with your Flat Panel Televisions ?

I connected my laptop to my LG 50PQ1000, and then my Blu-ray player didn't work - no mater what I did, the problem was "invalid format". I tried everything, including putting it on another TV - there it worked just perfect, but on LG no. I changed the HDMI cables, I tried all possible resolutions, no way. I updated the player - the problem remained the same. Now in order to watch DVD and BRD I put back the old cables, not HDMI cable.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I connected my laptop to my LG 50PQ1000, and then my Blu-ray player didn't work - no mater what I did, the problem was "invalid format". I tried everything, including putting it on another TV - there it worked just perfect, but on LG no. I changed the HDMI cables, I tried all possible resolutions, no way. I updated the player - the problem remained the same. Now in order to watch DVD and BRD I put back the old cables, not HDMI cable.


... LG 42LC2D 42 in. LCD HDTV

Hello, I just bought the KDL55EX720 LCD TV a few days ago. I originally hooked a DVD player up to it with the standard AV cords & it worked great. Lastnight I purchased a Blue Ray player and hooked it up with an HDMI cable. When I go to input it shows the HDMI connection, but when I select that connection the screen goes dark as if the TV is off so that I cannot go through the setup process with the Blue Ray player. I reset to the factory settings, but having the same problem. I have also tried


... Sony 55 KDL55EX720 3D LCD TV

When I turn on the T.V. the Sounds works for about thirty seconds then stops but the picture remains the same. Also My DVD Player never has sound, I have tried both HDMI Hookup and AV Cables. I Have


Check and replace its audio output circuit board. ... Flat Panel Televisions

I connected a computer to my Sharp Aquos LC26D40U via an HDMI cable but the Aquos does not report the native screen resolution of 1366x768 to the computer. Is there a firmware update for the Aquos available or is there any other way to force the correct resolution to get a better picture?


... Sharp LC-26D40U 26 in. LCD HDTV

My LG scarlet goes dark on 1080p60. Its hooked to my cable box, the picture goes black for a sec or two with no sound. No problems on 1080p30 or any resolution. I've tried two different HDMI cables bu


Sounds like a HDMI handshake is being lost. try a brand new cable. ... Flat Panel Televisions

Sharp model LC-32SH12U - 2 hdmi ports - whenever anything is plugged into them - ps3, apple (MBP, via cable, blu-ray player) they just show a green screen. We checked other hdtv's and it is just this tv. Trying to figure out what the problem is considering it can't just be that 2 separate hdmi ports are bad.


I don't have a solution but starting 2 weeks ago I have the exact same problem. Test different devices and cables and it points back to the TV. Anybody have a solution? ... Sharp LC-32SH12U TV

We just bought the BD-D8900A, and we have the plasma S/PS42PS2 which we bought 8 years ago. I have tried all different ways to connect the BD but we still get a split picture(two pictures side by side) and no sound. The TV has no HDMI socket so we are using the Y, Pr, Pb cable, what can I do to correct this problem. Thank you Teresa


You are getting two images split in the middle because you have enabled 3D on your Bluray player or are trying to play a 3D disc and your TV is not 3D ready.If the TV is 3D ready both the images with super impose on top of each other giving you a sli ... Samsung Flat Panel Televisions

My Denon receiver, mounted in another room, has HDMI inputs from my DVD player and cable TV. Signal goes from receiver through HDMI into a signal transmitter and then to the TV via Cat 5 data cable and signal receiver. The signal frequently drops out, and especially if any light switches are turned on/off. Is it likely the problem is the result of an electrical wiring problem, or could it be a problem with the Denon receiver itself?


It would seem that the transmitter and/or the receiver may be causing all the fuss...or the cat 5 is having issues...the cat5 cable may have some defect...try using another cat 5(even if it's 6ft long,move receiver closer to tv/dvd and use transmitte ... Flat Panel Televisions

Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable


... Haier HLH32ATBB 32 in. LCD HDTV

Hdmi connection i have PS3 and try to connect with HDMI cable but it still want work. I tried another cable but i keep the problem. No picture no sound. Anny suggestion?


Sounds like your TV is not compatible to ps3..or you can try to adjust your resolution ... Sharp AQUOS LC-32D44U 32 in. LCD TV

Foxsat-HDR 100GB, 2Yrs. old. Problem--HDMI Feed to LG32LC2RR Television---Audio OK but NO Video--OSD--"No Signal" message. Check-- HDMI Feed from DVD Player-- Audio and Video--NO Problem. Check-- SCART Feed to Television NO Problem. Check-- Changed HDMI Cable--- NO Cure. Regards, Ray Parnell.


... Humax Flat Panel Televisions

Hdcp compliant vizio 55" - now recieves message stating set op hdmi port requires hdcp compatible tv input. switch to a compatible input or do not use set top hdmi port. If TV input supports HDCP then the hdmi cable may be at fault. Purchased new HDMI cable tried on all 3 hdmi input ports. No success. How do i correct this problem?


... Vizio Flat Panel Televisions

Issues with LG 26LE5300 26 in HDTV LCD TV Both audio & video flicker off & on when connected to PC via an HDMI cable. No problem when in TV or AV (DVD) modes. PS. worked fine on Day 1, did not use HDMI on Day 2; problem arose morning of Day 3. I've tried the other two HDMI ports to no avail. I've disconnected and reconnected HDMI at PC. I've rebooted both TV and PC.,


I tried this.. and it works perfect for the video.. but there is no audio.Is there any specific setting to be made in TV or my laptop?I have Dell laptop with Win7, because I dont see any option to enable audio.. ... LG 26LE5300 26 in. LCD HDTV

Problem: Signal de-resolution with HDMI hooked up. Olevia 232-S12. I know this is a long shot with the Olevia being 4+ years old and now defunct.... but anyone familiar with pixelation with the HDMI port? It is very intermittent, but occasionally will cut out with white and colored pixels, with sound degradation. Thought it was my HDMI extension cable, but it happens now with my BluRay hooked up with a 4ft high quality cable. Anyway to just replace the HDMI port? Or do I need to replace t


... Syntax Olevia LT32HV 32 in. HD-Ready LCD Television

I have a hitachi 42hds52, Two of hdmi outlets stop working . I try different hdmi cables and still nothink, do anyone know what is the problem cables


... Hitachi UltraVision 42HDS52 42 in. HD-Ready Plasma Television

The coax input on my tv is broken off how can I connect the cable to it other than the red white and yellow cords which don't have a good connection either I have my dvd player hooked up to hdmi is there a way to hook the cable up using the hdmi cord without a cable box just the line.


Hi, unfortunately the only ways to get the signal to the tv is with either coaxial, the red white and yellow rca cords, or hdmi and also the " RGB " inputs, also called "component video input ". some dvd players have component video outs-that could ... Samsung Flat Panel Televisions

I have a vizio model GV47L FHDTV 20A LCD TV. We purchased it 4 years ago, this morning it began making a hissing sound while we were watching it. The picture also got dark and distorted. I've tried troubleshooting the problem and have realized that the sound remains constant regardless of the volume level, or input( even muted). I'm sure it's not an issue with the cable, because the problem persists with the cable box off. I've disconnected all inputs and and the sound bar, but the problem is th


... Flat Panel Televisions

Phillips 32 inch lcd model 32pfl3504d/f7 when i hook up my phillips dvp3982 dvd player with a hdmi cable, ports 1 and 3 do nothing. port 2 gives an screen message that says "format not supported" the composite video cables work fine, but the picture quality sucks. i have tried 2 different hdmi cables, so i do not think that is the issue. please, HELP ! ! !


... Philips 32PFL3504D 32 in. LCD TV

Sansui(Model HDLCD4650) will not detect phillips or toshiba blu-ray player connected via HDMI. I connected a laptop through same HDMI 2 port, same cable, and HDMI 2 input selected & it worked fine but when i try the bluray players, they don't get detected. No bluray home screen is seen. Help!


... Flat Panel Televisions

I have a Toshiba 44NHM84 DLP TV. I just bought a Panasonic Blu-ray player. I hooked it up with HDMI to DVI cable and I get no sound. With component cables the sound works but the picture is severely degraded. Is this a problem with the cables, the Blu-ray player or the TV? I'd appreciate any help. Thanks


Check the conection properly ... Toshiba 44NHM84 TV

I have a Samsung PN50B650S1FXZA and the HDMI inputs do not work.The component video and RF coax inputs work. Tried different HDMI cables and different devices Blu Ray player and Cable Box.


... Samsung FPT5084 50 in. Plasma HDTV

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

I have bought a HDMI cable and I cant seem to get my Prosonic to work with my pc. It works on other TV's The cable works fine with dvd player. Is there somewhere on the TV I shall activate first? I am choosing HDMI on the TV by the way


How many HDMI Inputs are available on the TV?\012Also, are you trying to project your computer to the TV or get TV on your PC?\012\012I will assume the first scenario. The only thing I can suggest is that if there are multiple HDMI inputs then ... Prosonic Flat Panel Televisions

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

Sir, I have a Toshiba CT-90159 home theater> Since yesterday I am getting a ping color on the screen.I put it under the HDMI mode (06). I am using a Philips DVD player. Till yesterday I have been able to watch DVD player on this home theater. I have changed a new HDMI cable. Please mail me how to resolve this problem. Thanks Sridhar


... Toshiba Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5336 seconds