Suggested Questions/Answers :
It is recommended you read all this kind of situations
Lg 42Lc5D LCD Tv has no HDMi input from al 3 ports. we have sound but no picture. Tv works in antenna and cable mode, just not HDMI. i have powered down and reinstalled the cable but still no picture. any ideas tv is 3 years sold.
LG 42LC2D 42 in. LCD HDTV
My Panasonic 1080p TC-5-ps14 TV will not on when I turned power on. What I did was unplugged the power cable. Pushed on the power button for two minutes. Then plugged the power cable back anh turned on the TV. TV still won't turn on. What is the problem? Please, help!
Panasonic TC50PS14 Plasma TV
I presume we had a power surge of some kind. The TV will not power up. All the components (TV, DVD player, VHS/DVD Player) that were linked to cable went out other components (stereo) are still fine even though the were plugged into the same AC power source. Is there any way to trouble shoot the issue without taking the unit in for repair.
You can only find out, if you can remove the back cover of the components not working. The best thing to look for, is to locate the fuses located in the power supplies of each component. If the glass fuses are open, and they are still clear, replacem ...
Emerson LC320EM8 32 in. LCD TV
I have a LG 32LH30 TV. When I power on the TV I get a picture in the top half of the screen and vertical lines in the bottom half. Also I get a thin white dashed line across the middle of the screen. After about 10 minutes I get full screen picture. However the top third of the screen is lighter than the bottom two thirds. I still have the thin white line across the middle of the screen. I am using HDMI cables from my cable box. I also tried Audio/Video and Component cables. I took the back
LG 32LH30 32 in. LCD HDTV
TV powers on but none of the controls work, either from the TV or the remote, no volume, no input selection or anything else. The TV was connected to a cable tuner so it still has a great picture. I now use the cable tuner to control the volume.
CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start ...
Mintek DTV-263 26 in. LCD Television
Today, while watching tv on the Dish, tv suddenly started powercycling. I unplugged it, waited, and then tried a DVD -- worked fine. Tried Dish again, power cycled again -- on off on off, 1/2 second of picture, no sound, struggles until I unplug her.
It's an LG 47LD520 5 months old. Dish network through HDMI, DVD through red / white / yellow.
Tried Dish though component cable, still power cycles. Tried all HDMI ports, too, same thing.
Brought in my old tv and hooked to Dish thou
If you are using a powerstrip may not be supplying enough power to run the LG HDTV and your HD receiver. If you are using a powerstrip make sure the receiver is plugged directly into the wall. Otherwise this may be a grounding issue please reply if t ...
LG 47LD520 47 in. HD-Ready LCD TV
I moved my samsung SPP4251AX/XAA flat screen tv to a new location. I had the cable un hooked and the power off for 2 days. When I hooked the cable back up to the tv the picture will not come on. I have tried everything I can think of from the set up menu and the screen is still fuzz.
Samsung Flat Panel Televisions
LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and
LG 32LB9D TV
I have a Bravia model KDL-52v4100 all hdmi ports stop working. Tried all of the power reset suggestions with no solution.Replaced all cables and removed all surge protectors...still no resolution.Any more suggestions?????
Sony BRAVIA KDL-52S4100 52 in. HDTV LCD
Sanyo DP50741 has no audio. It started after multiple power surges. I have checked all my other components connected to the TV and still no audio. There is no static sound when I turn to an analog station but when I turn on my cable box it makes a strange sound like it is a jet engine spooling up. What do I need to do?
Flat Panel Televisions
My tv philips lcd model 42pfl3605/12 has no red light. I have checked the power cable, but still nothing. What can I do to fix it?
Look if it has a master power switch on the back it did not get turned to off which will kill all power to the set---failing that someone has to get inside (carefully) and look for the main fuse the power cord goes almost directly to and see if its g ...
Flat Panel Televisions
I have a Vizio VA370M. My problem is that the vizio's logo stays on screen and none button of the tv or the remote control responde, it seems to be a problem with the lcd controller because at first i noticed that the cable that goes to the screen was a little loose and then it works ok but now it does the same thing again. I also tried disconnect the power cord and wait for some time to reset the tv but it not seems to work.
The image looks great but again...the logo is still on screen and t
Vizio VA370M 37 in. TV
I have a Mitsubishi WD-73737 and when I turn on the tv the power light flashes very fast for a minute then stays a steady green and the screen is a solid blue. There is no sound as well. I have tried the system reset and it didn't do anything.
I was given this tv, so I don't know how old it is. The tv will occasionally work but that is very random. The only item I have plugged in is an Xbox 360 with the component cables. The menu button does work so I know the screen still works.
Do you have the input turned on that you use the xbox for? Try different inputs as well. If you are getting the menu to come up, the blue screen is telling you that you don't have a signal being run through that particular input. ...
While watching my LNs4051Dx TV the screen goes black but sound is still on. I power off and on the cable box and TV and picture comes back but only for 30 minutes or so. Three years ago I repaired the capacitors on this TV with great success. Anyone have a fix for this problem?
Replace CM807 and CM808 1000uf 25V in the power supply section. ...
Samsung LN-S4051D 40 in. LCD Television
My Samsung LA40R71BD is giving sound but picture in not displayed? i have plugged off the power cable and switch on/off several times but still its not picture is not displayed?
Sometimes in the afternoon times picture displays but almost it doesn't.
Samsung LN-S4051D 40 in. LCD Television
The screen shows a no signal and the remote does not function. How do you reboot the system? We tried to diconnet power and cable for 12 hours and it still shows no signal. The english has switched also to spanish.
What is the model number of the TV? ...
Vizio VP322 32 in. Plasma TV
Samsung LE46M5 lost picture can not even get menue on screen still have sound. disconnected and reconected all wires cables and power no joy. is this expensive? purchased 06
T con board fuse may have blown very cheap to replace on the t con board there is a letter P on the board near to the cable end check this with a meter if blown replace with a nintendo fuse they are the same rating and cheap and easy to get hold off, ...
Samsung LE46M51B 46 in. LCD Television
I have a kde-50xs955 sony plasma tv and now hdmi port stopped working. tried with new hdmi cables but no luck. cut power to reboot still not working. tried different devices and wont show it is even connected to hdmi
HI:\015\012You need to replace the analog board assembly, this is the board that you plug connections into, seems the HDMI port has malfunctioned, there may also be a problem with the main board assembly that the analog board connects to. ...
Flat Panel Televisions
I have a problem using a VGA cable to connect a laptop to my Insignia 32 LCD TV (model NS-32E570A11).
I have found that the TV will power-on but "freeze" if I have a VGA cable connected to the back of the TV (regardless of whether the other end is connected to the PC laptop or not. The laptop is an Acer Aspire One D255.
By freeze I mean power light is blue, but no display, no response on remote or side buttons and this requires the power cable to be disconnected, the VGA cable disconne
There might be some garbage in the monitor processor, so unplug it from the wall for 40 min. and that should reset it back to normal. ...
Insignia IS-LCDTV32 32 in. Television
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
Polaroid 37 in lcd....was installing power board and left out the plastic shield.Went to hook up cable wire and spark!! two capacitors bubbled and replaced them.Now tha red power light blinks continuo
Likely got other things on the board---maybe try another board and with more care this time? ...
Polaroid FLM-3734B 37 in. LCD HDTV
NEC PXT42SPKR Hi, I am trying to find a power cord for an NEC tv model number PXT42SPKR. I don't know how old the tv is, my husband moved house before we were married and now can't find the power cable for it. Is it possible to buy a generic cable of the right voltage if you can no longer get an original cable, and if so what voltage cable and what type of pin would it be?
Flat Panel Televisions
I bought this N2635W it wasnt turning on. (So I thought it was the power supply)
I bought a new power supply, and still didnt turn on.( So I thought it is the main control board)
I bought a usded controler board, then it just turned by itself and there was only a white screen. No sound no controls responding. ( So i thought it needs a new one).
I bought a new controller board from viewsonic,. Now it responds to the power button, I can turn it on and off., but still theres only a white screen
The tv Tuner signal board is the cause and the problems.That the board,where the incomming broadcasting signal cable wire plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement. ...
ViewSonic N2635w 26 in. LCD Television
In the process of my move, lost my Niko power cord to my OTP-2011-R flat screen. When the cable man tried to hook up my cable connection he used a universal power cord. Although we were able to get sound, there was absolutely no picture. The day before my move, the TV was working perfectly. Is the problem in the universal cord connection or in the TV? Niko seems to be out of business as all of the phone numbers for that company have been disconnected. Is there someplace I can buy a power
Using a different AC cord did not hurt your TV. Something more than likely happened internally during your move. ...
Niko Flat Panel Televisions