Having problems with your Flat Panel Televisions ?

Have an old Super Nintendo that I am trying to hook up to an LG 32 LCD television. I hooked up the RF Switch to the back of the LCD TV where it indicates Cable In changed the TV to analog and placed it on channel 4 as indicated on the box and I have no picture of the game on the LCD TV



Answers :

Not 100% sure on the problem you are having but i will give a rundown on how it should be set up,

1.) there is usually a TV ariel style 'T' Junction just put this inbetween the signal from your tv arial and the tv itself or if you dont have an arial just plug it straight into the TV.

2.) make sure your tv is set to its analogue tv mode, NOT the digital tv mode as this will not work

3.) Once on this mode it should be good to go, if you still cant see the signal change the tv channel, it could be up to channel 9, if i remember rightly thats where mine used to sit,

Hope this helped :)
\012\012

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Have an old Super Nintendo that I am trying to hook up to an LG 32 LCD television. I hooked up the RF Switch to the back of the LCD TV where it indicates Cable In changed the TV to analog and placed it on channel 4 as indicated on the box and I have no picture of the game on the LCD TV


Not 100% sure on the problem you are having but i will give a rundown on how it should be set up, 1.) there is usually a TV ariel style 'T' Junction just put this inbetween the signal from your tv arial and the tv itself or if you d ... LG 26LG30 26 in. LCD TV

Put up a digital HD antenna outside on a 20 " ft pole. Used it on an older TV with the assistance of a SDTV Digital to Analog converter box. Recieved upwards of 30 channels very clear. Decided to hook the same antenna minus the converter box assuming this 2 year old HD LCD Flat Screen is Digital ready and have no need to convert anything to analog. I hooked the antenna lead into the ANT 1 (air) IN connection. Activated the Auto Program and it indicates that it searched for all available cha


Hello\015\012Although your Samsung has HDTV comailant tuner inside, it must get sufficiant signas strength to memorize all the HDTV channels. Normally HDTV signals are weak compare to analogue transnsmission signals, and contain more details. ... Samsung LN-T4061F 40 in. LCD HDTV

I have a Sharp AQUOS LC-26DV22U 26 in. LCD TV with a built in DVD. When I turn the TV on it will come on as it usually does (the please wait appears in the lower left corner and moments later in the right hand corner the channel box appears and then the picture comes on) and after about 30 - 45 seconds the screen goes blank, the audio stays on and I can change the channels with no picture. When I turn the TV off and wait a couple seconds and turn it back on the "please wait" that appears in the


... Sharp AQUOS LC-26DV22U 26" LCD TV

We recently purchased a vizio 47 in lcd tv. sound goes out , returned that tv, now the replacement is doing the exact same thing. we have a great picture, just no sound. if we change the channel we get sound, then it goes out. cannot figure out why this is ocurring, we have rebooted cable box,


The cable box have problems,tries replacing the incomming broadcasting connecting wires,that goes to the tv Tuner signal board.If u still have the same problems,call ur cable company for a cable box replacement. ... Vizio VO47L 47 in. LCD TV

I have a Sanyo LCD-32E3 using analog, not digital. I have two remotes. The Sanyo remote turns the TV on and off. The Rogers remote changes the channels. If the Rogers is used to turn off, when the Sanyo is later used to turn on, nothing happens. This has happened before and somehow by pressing every key on both remotes, I have managed to get a picture. Not so this time. What should I do? I would be very grateful for your help. Thank you.


... Flat Panel Televisions

My wt-46809 Still has a good picture. It receives its signal from an HD converter box from Time Warner Cable. The other inputs on the tv however don't seem to work. I can't use my DVD or hook up any game systems through the various inputs. In addition, while the HD channels (1000 and up) work, channels 1-999 don't project a picture (only audio). I've never added any HD retrofit to the set, so I'm not sure if true HD is being projected or if the picture is just very good digitally clear SD.


\012TV needs servicing PLEASE TRY THE BELOW FIRST THEN DO A FULL SYSTEM RESET\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets try your ... Mitsubishi WT-46809 46" Rear Projection Television

How do you change pixel? i have dish network. HD channel is perfect but when i see regular channel, picture is cut off from the bottom and top. its very irritating when you see game. i tried changing the aspect ratio but it only have 3 options: 6:9 standard and extended and zoom. can anyone help me?


You will want to keep your aspect ratio on 16x9. On your DISH Network remote press the format button on your remote it will have an asterisk (*) on it. Also, try the page up and page down buttons right of the volume. If that fails take the factory re ... Hitachi 50V500 50 in. HD-Ready LCD Television

I'm using LCD tv tuner box , to switch on TV mode in My LCD Monitor ,Since recently not able to change the channel it's displaying one channel only.


I think perhaps we have a language barrier here as I really to be honest do not see what your question is? ... Flat Panel Televisions

PICTURE STUCK ON ONE CHANNEL, GHOST CHANNEL OVER THE TOP OF THAT AS YOU CHANGE CHANNELS...STILL SEEING THE CHANNEL THAT IS STUCK IN ONE PLACE... 55 INCH HATACHI ULTRA VISION....


This is called image burn, or image retention. There is no cure for this. The image has been burned into your picture tubes from having the same image tuned in for too long. ... Hitachi 57S715 57" Rear Projection HDTV

Hi. We have an old analog TV (Sony) which has a new digibox running through it (since the switch over). Was fine, but over the last few weeks, intermittently, the screen goes black with EXT 1 in the top corner, but perfect sound. Change channel, no picture, perfect sound. If we fiddle with the aerial cable, the picture jumps back. This happens sometimes after 30 mins of perfect picture, and sometimes after 3 hours.. sometimes not at all!Have replaced cable, no joy - same problem - and to be fair


Your picture tube is on the (Verge) Of going. ... Flat Panel Televisions

Magnavox LCD tv model 39MF412B/F7 when we change channel the picture goes black but we have sound. We have to turn the tv off and then back on to get picture.


... Magnavox 39MF412B 39" Class LCD 1080p HDTV with Dynamic Contrast

Acoustic Solutions 32in LCD32761HDF TV Headphone socket entry in the audio menu not hightlighted so cannot use my headphones!! Also aspect ratio settings in HD channels are not right. i.e. 720 on the V box leaves black lines on the tv display and 1080 wide makes objects look too tall! What are the settings for Virgin V Box (HDMI) and your TV? andd how do I change them in the picture menu? Carole


... Flat Panel Televisions

I'm getting a black rectangular box in the middle of my LG LCD TV 42" bought about a year ago. This box doesnot disappear with changing channels. Appreciate your help in this matter


Sounds like you have a cluster of dead pixels.If you're still within warranty, contact LG directly. If you purchased extended warranty, then contact the store you purchased it from.This is generally not economically feasible t ... LG Flat Panel Televisions

Have Protron PLTV-3250 TV and I was told the power supply board was bad. All indications concluded this was the problem. Replaced the power supply board (FSP194-3F01 power supply) and turned the TV on. It has power, but I have no picture. I can hear the sound from each channel, but that is it. I can change the different sources using the remote control and when I come back to TV, the picture (white fuzz or blue screen) will flash for a moment, then it goes black. If I select a source that


... Spectroniq PLTV3250 32 in. LCD TV

Picture I was litening to music threw direct box,vacumming,different outlet then tv. turned it off,& used converter box buttons to change channel. got no pic no sound. pushed more buttons,turned it off, then on hit reset, pulled card out put it back,then turned around to get remote, and saw my 82 yr. old dad holding remote as far out as he could,as if he was trying to get around me! I asked him what button he pushed & he said none. now we have sound no pic. it turns on deep blue screen no menu


I assumes that there is a confused memory IC inside, due to improper data inputs. Try a hard reset to this set. Unplug it from AC mains wall socket, and re-plug it back after 10 minutes of so. This must make it a hard reset. If it do not help you ... Samsung 50 in. Plasma TV

I have a pds4250 plasma I have connected the scarf lead to my sky box and plunged in the speakers .,I can change channel use volume all works fine but no picture what did I do wrong. Is there a cable I should have. Why is there no picture please help .


... Flat Panel Televisions

MY SAMSUNG LCD TV MODEL LNS4695DX HAS A SNOWY PICTURE CAN SEE PICTURE BUT IS VERY SNOWY I TRIED ALL INPUTS WITH CABLE DVD AND A GAME SYSTEM BUT NOTHING CHANGES AND THE WIERD PART IS WHEN I HIT THE MENU BUTTON THAT COMES UP CLEAR AND PERFECT I DONT GET IT NO SNOW ON THE MENU BAR AT ALL


Check the picture settings in the menu... someone may have been fiddling with them ... Toshiba 32AV502U 31.5 in. LCD HDTV

MY SAMSUNG LCD TV MODEL LNS4695DX HAS A SNOWY PICTURE CAN SEE PICTURE BUT IS VERY SNOWY I TRIED ALL INPUTS WITH CABLE DVD AND A GAME SYSTEM BUT NOTHING CHANGES AND THE WIERD PART IS WHEN I HIT THE MENU BUTTON THAT COMES UP CLEAR AND PERFECT I DONT GET IT NO SNOW ON THE MENU BAR AT ALL


The OSD comes from a different area---if on all inputs it is on a board that processes all signal in the set--tuner,AV etcYou might want to Google the model number with "parts" to come up with a list of the boards and prices if possible for t ... Toshiba Flat Panel Televisions

Rca p61939 My Rca projection tv worked just great then one day went to turn on there is nothing. I have sound but absolutely no picture. I have checked all cables, tried different cable box, dvd boxe etc. Nothing shows up on the screen at all, not even the standard channel indicator. What is wrong and can this be fixed and how?


... RCA P61939 61" Rear Projection Television

This is a problem with my Vizio 19 inch LCD TV. I bought it about a year ago. This didn't start happening until about half a year ago. One day the problem started while I was sitting there playing some video games (the fact it's a game instead of a over-the-air TV signal shouldn't make a difference though, I don't think). All of a sudden the screen went black, but the power indicator light did NOT change to yellow (as it would have if the TV was in the off state). The remote control wouldn't tur


Sorry to hear what your going through the issue is with your main board ,there is no troubleshooting for This issue , you would have to take it into a electronic shop for repairs sorry ... Vizio VA19LHDTV10T 19 in. LCD TV

LG 37LD490 LCD TV I HAVE NO PICTURE BUT I CAN STILL CHANGE CHANNELS AND SOUND HOW CAN I FIX THIS


... LG 37LD490 37 LCD HD Ready TV 1920 x 1080p HDMI x 3 Bui Refurbis

I have a Sanyo TV LCD-26XR9DA and the picture is blurry, the thing I don't understand though it that the menu bar and screensaver bar are crystal clear but if I use it for TV, computer or games th


... Sanyo HT30744 TV

We are installing COMCAST Digital Converter boxes into all our tv's at my hotel. But the tv needs to be on Channel 3 inorder for the digital boxes to work. Unfortunately the tv goes directly to Channel 79 everytime we turn it on and you have to manually change the channel to channel 3. I deleted all the channels and auto programmed it. But it still comes up on a static Channel 79. Then I changed the programming of Channel 79 to "BLANK" and you can still here the static but can't see it. Hopefull


Leave Comcast connected to Tv then Go to Menu and Change from Air To Cable Then run Auto Programming. ... Zenith C27A24T 27" TV

I have onida xaria lcd 22. After 14 months a new option automatically comes that was factory setting and hotel setting . I pressed factory setting but after this my source button (tv to pc or hdmi ) is not working. One more thing i am unable to change channel, sound type or picture mode. Please help :me i am feeling worst to be onida customer and his customer is also worst. When i talk to repair executive he smiled and no i will not give the process how to enter security. Plz plz help me guys w


... Standard (CRT) Televisions

46" Lost Picture then when I attempted to change channels lost sound as well. Green light on tv is on and Verizon FIOS box appears to be working. Other tv on system works


Hi!That's a clear indication that you have a bad power supply in your TV.If\012 you know how to DiY...I suggest you open your TV. Locate the power \012supply section, it is where the end of the power plug is connected. \012Replace all blown o ... Toshiba REGZA 47HL167 TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2817 seconds