Having problems with your Standard (CRT) Televisions ?

JVC television automatic programing remain on stop will not scan for digital channels

\015 The JVC will go to channel selection then skip digital tv selection for programing anolog and digital channels\015

Answers :

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

JVC television automatic programing remain on stop will not scan for digital channels

... JVC Standard (CRT) Televisions

We have just received a new toshiba 32BV500B LCD tv. We did the initial installation but after the analogue channel scan the digital channels have disappeared and we cant find a way to get them back. How do we get the digital channels back? There' no set up menu, only installation which doesn't give an option for automatic search. Thanks, maria

Hopefully, if you were to press the menu button and somewhere on the screen will be DTV. Select DTV and then you can run search again.Hope that makes sense. ... Toshiba Flat Panel Televisions

BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W

... Flat Panel Televisions

Have Proview PA40JK1A 40 In. LCD Television tried to scan channels in using rca indoor flat panel antenna, it gets no analog channels & wont even scan the digital ones, is there a problem with tv tuner or the antenna?

... Proview PA40JK1A 40 in. LCD Television

JVC LT32X667 does not scan digital channels 55 and above correctly

... JVC LT32X667 32 in. LCD Television

My JVC HV-32D40 BK TV is not recognising any TV channel and if I select Menu and Setup to re-tune nothing displays at all on the screen. It was working fine and then I went to change channel and it stopped working. I cannot change to any channel or use the Guide. I can use the TV with my DVD player connected by SCART accessing digital channels and DVD.s. Any suggestion on how to reset the TV?

... JVC Flat Panel Televisions

I bought a TOSHIBA 32KV500B tv. At the Initial Installation mistakenly I selected "yes" for 'do you want to search analogue channels?' guestion. And then I lost all my automatically selected digital channels and I cannot go back to retune the channels. I have no SETUP in the main menu and then no INSTALLATION option. I have 6 main thing: picture, sound, feature, install, program table, Source: tv. I have tried to use the APS but this one retunes the analoge chanells only. Please help me how I c

I had this problem and searched the internet for hours looking for an answer and was given the initial same reply as this and it does not work. To solve this problem all you simply need to do is press source button on the controller followed by press ... Toshiba Flat Panel Televisions

How do i program channels to a jvc sdtv - JVC Standard (CRT) Televisions

With the original remote enter the menu and find auto program. ... JVC Standard (CRT) Televisions

Hi, I have a Sony RDR-HDC300 high def digital recorder. When I select a program from the Guide and hit the Red Record button, the program begins to record & then stops after a few minutes (anywhere between 2 & 10mins). It does this regardless of whether I'm watching another channel or if the TV is off. It is plugged in, has enough space (43 hours free) & no power cut was applied to the appliance. This is very frustrating.

I have the same problem. I think disabling the auto power off in settings may fix it .Really annoying though. ... Flat Panel Televisions

Sony Bravia LCD Digital TV model KDL-32V3100. I have had both digital and analogue channels until last night. Now I cannot get digital channels. I have tried Full Scan, Quick Scan and Manual Scan with no result. I have reset TV but still no digital channels. Help!

... Sony Flat Panel Televisions

How do I get my JVC television to search for digital channels?

... Flat Panel Televisions

We are installing COMCAST Digital Converter boxes into all our tv's at my hotel. But the tv needs to be on Channel 3 inorder for the digital boxes to work. Unfortunately the tv goes directly to Channel 79 everytime we turn it on and you have to manually change the channel to channel 3. I deleted all the channels and auto programmed it. But it still comes up on a static Channel 79. Then I changed the programming of Channel 79 to "BLANK" and you can still here the static but can't see it. Hopefull

Leave Comcast connected to Tv then Go to Menu and Change from Air To Cable Then run Auto Programming. ... Zenith C27A24T 27" TV

JVC AV-25P8-PH TV turns on (the standby mode) with the red light, but when we try to punch in the channel (using either remote or the push buttons on the television itself), the red light becomes green then automatically shuts off. We can't get to work the TV even if we plug it directly on the wall socket, nor unplug then plug it again. Just goes on and on. What do we have to do with this to make it work?

Hello,The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.Th ... JVC AV-32260 32" TV

My television ONN XQ2623 can auto scan all my channels but does not save them. I need a 4 digit pin code which I can't remember. Does anyone know how to reset the pin code.

... Flat Panel Televisions

Emerson flat screen television won't stop scanning through channels

... Flat Panel Televisions

Toshiba regza scan digital channels - Toshiba 42HL167 42 in. LCD Television

... Toshiba 42HL167 42 in. LCD Television

Can not pick up any channels after auto scan - DIGITAL PRISM 3.5" Color Pocket Lcd Tv Television Ntsc Atsc-301 Rechargeable

... DIGITAL PRISM 3.5" Color Pocket Lcd Tv Television Ntsc Atsc-301 Rechargeable

I have a digitrex flatscreen tv model ctf2671 with inbuilt freeview. The first retune necessary for the digital switchover went fine earlier this month. Now a second retune is needed but the tuning functions stopped working. it initially starts scanning but after about 1/10 is done nothing happens, the progress bar doesn't move any further. It means I have lost many channels. HELP !!!

... Flat Panel Televisions

Hi I have a BUSH IDLCD26TV07HD television and it will not tune digital channels. I go through the 'set up' options and get to the 'Auto Tune' request but the tuning scan bar does not appear and tunin

... Bush Industries IDLCD26TV16HD LCD TV

How to program my daewoo tv to scan channels - Standard (CRT) Televisions

It is done with the original remote by entering the customer menu and set will have a auto program option---you need that remote. ... Standard (CRT) Televisions

Jvc gennessa how to scan for channels - Standard (CRT) Televisions

Need to know if a cable box is used. If using the built in converter there are more than 1 positions that can be selected. On one setting some channels are omitted. A channel scan is usually on the remote that came with the tv. It is under the menu o ... Standard (CRT) Televisions

I recent purchased a 23" full HD LED TV from The Source. I have it hooked up to a Shaw PVR and have programmed the Shaw remote to access more channels and be able to program taping. When I first turned on the TV and was about to do the initail setup, it went from the Welcome screen to Channel Scan and despite my best effort I cannot get it to scan the channels. I tried pressing OK and then pushed the channel button but nothing happen. I then pushed Menu, scrolled down to TV and then channel

Hi there,\015\012\015\012There is always a possibility of getting a lemon when you buy any new electronic device, but I hope this is not the case here. From what you describe, it would appear that the channel scan is not finding anything ... Flat Panel Televisions

How do I get my tv to scan the digital channels? I have used the channel scan and it will not let me scrowl over to scan them . I do not have a digital box but was told that this tv has one bilt in.

HiAlthough your TV is hd ready, it does not come with a digital tuner built into it.You will have to add an external tuner box to receive digital broadcast stations.I don't suggest getting one of the cheap ones, as the only provide ... Hitachi 51F510 51" Rear Projection HDTV-Ready Television

My mother in-law has a 32 Broksonic Hdtv today the digital channels stopped working on analog channels are working but they have no signal

... Broksonic TV

When setting up initial settings for TV completed the digital channel scan ok then I accidentially accepted to scan analogue as well so not sure how to reset TV back to digital channels

... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1736 seconds