Having problems with your Standard (CRT) Televisions ?

Okay, well I have a JVC AV 32120 and it will run DVDs and all fine. That's great and all but when we plug the cable into the back and go to watch tv, we won't get anything coming through, just a blue screen. I've tried going into the menu and adding the channels individually, then the auto programing mode as well, I've gone as far as resetting all the v chip codes and still nothing! I'm desperate, please anyone?!



Answers :

I would check and make sure you are connected properly in the back of the unit. Sometimes people put them in a little back ward and while they will allow you to watch a show they will not let the tv pass threw. the other would be making sure to select the right input mode. some times buying a splitter can be an easy fix. they run about 25.00 at most electronics stores. I got one at Radio Shack.

Repair Help & Product Troubleshooting for Standard (CRT) Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Okay, well I have a JVC AV 32120 and it will run DVDs and all fine. That's great and all but when we plug the cable into the back and go to watch tv, we won't get anything coming through, just a blue screen. I've tried going into the menu and adding the channels individually, then the auto programing mode as well, I've gone as far as resetting all the v chip codes and still nothing! I'm desperate, please anyone?!


I would check and make sure you are connected properly in the back of the unit. Sometimes people put them in a little back ward and while they will allow you to watch a show they will not let the tv pass threw. the other would be making sure to selec ... JVC Standard (CRT) Televisions

BAUHN I purchased the above TV at Aldi,s Liverpool store in Sydney 10/04/2013. When I set up TV the Guide (EPG) was working fine. For some reason the Guide (EPG) has now stopped showing any programs and says No Event Information and the same message when display is selected on the remote for the program you are watching. The signal strength for all channels is showing 4 to 6 bars and the picture is fine, I have tried Auto Scan again and tuned in all Channels again but this made no difference. W


... Flat Panel Televisions

I have a Curtis 24 inch Full HD LCD TV 2425A never used Trying to set it up and their was no book in the box it says to run Channel Auto scan .it is hooked up to Dish satelite ant. .to run the auto scan.I cant get it to go on channel 60 to program the dish remote Thank you Mr McMillan sr.


Used the tv remote go into tv Menu goto SETUP go down Ch. enter pick CABLE and enter again.Tv now will go into auto scanning for CABLE channels.After the auto scan done for the CABLE channels are finish.After this u will able to go to channel 60 to u ... Curtis Standard (CRT) Televisions

I have lost channel 09 (UK) BBC4 a few times from the TV. I have tried to get it back using auto tune but the while all the other programs are retuned channel 9 is not and even on the information page there it goes from channel 8 to channel 10. Can you help me tune to BBC4 which is functioning on a second tv in the house. Thanks in advance for any help


Try autoprogramming at different times. signal may be better during the day than at night, and vice-versa. ... Sony BRAVIA KDL-32S2010 32 in. LCD Television

I have a Phillips TV and can't get any channels on it all other TVA in house are working fine when I try the auto programming and try to select cable it says indicator is available for diigital b


First thing to do is see if a DVD etc. hooked to a rear input works.If it does you may have to go into the menu of the set and set it back to regular cable to be able to program it.If a cable box is used here you could also connect fr ... Flat Panel Televisions

MY GE TV MG19000 / CTC185A9,STUCK ON ONE CHANNEL AND UNABLE TO GET A CABLE SIGNAL TRY AUTO PROGRAM BUT IT GOES BACK TO THE SAME CHANNEL STUCK,NO SIGNAL PROBLEM


... Flat Panel Televisions

The dvd player works, but no tv stations. Tried to go to the tuner and auto program to add channels, but will only delete the channels. I can't figure out why the TV picture won't work. Any ideas?


HelloThere is a memory IC, a very small one having 8 solder leggs, that stores the channel conditions and all other details of picutre, such color, contrsat, brightness, sharpness etc;. Eventhough it small in size, the function with it when the ... Apex Digital AT1314DV 13 in. TV/DVD Combo

Justght rcrn03br universal remote to operate my rca model 46la45rq lcd t.v. The code list came with i tried every code and tried brand search and auto program. All i can do is turn on my tv and change channel and turn up the volume. But can not use the menu key or pip or input buttons is there a easy way to get the code for my specific tv thanks.


... Flat Panel Televisions

I have a emerson hdtv and everytime i try to auto program the channels it goes about 35% and shuts down any ideas?


Replace its memory IC. It can be located at its main system control section. ... Emerson TC1325 13" TV

Lost remote for vr-2218. Trying to do auto channel scan--says to hit ENTER, but without remote, can't do ENTER. I have FIOS, but Verizon remote won't program TV. Any idea what code may be?


Codes listed in my manual for White Westinghouse are 0169 or 0003 or 0014 or 0043. Are yousure though there isn't a flip down panel somewhere which gives you the option to access "enter" ... Westinghouse LTV-27W2 27 in. HD-Ready LCD Television

Question: Is it possible to program HD channels available through basic cable service? Or: is the auto channel preset function able to program channel numbers with 4 characters (example: 1001, or h


... Flat Panel Televisions

My sansui tv wont program channels, you start it and it looks like its going to then just stops kicks out of auto programming and nothing


... Sansui 19 in. LCD TV

Insignia NS-LCD22-09 lost its channels. It keeps telling me to run auto program, but finds no channels. I've run the autoprogram 3 times. I also unplugged the TV and moved it to a different location, attached it to a different antenna which I knew was working with another TV. The auto program still found no channels. Would I be correct in thinking I need to take it in for repair or replacement?


... Insignia NS-LCD22-09 LCD HDTV

We are installing COMCAST Digital Converter boxes into all our tv's at my hotel. But the tv needs to be on Channel 3 inorder for the digital boxes to work. Unfortunately the tv goes directly to Channel 79 everytime we turn it on and you have to manually change the channel to channel 3. I deleted all the channels and auto programmed it. But it still comes up on a static Channel 79. Then I changed the programming of Channel 79 to "BLANK" and you can still here the static but can't see it. Hopefull


Leave Comcast connected to Tv then Go to Menu and Change from Air To Cable Then run Auto Programming. ... Zenith C27A24T 27" TV

Hello, I own a Samsung LCD TV Model LA22B350F2. I have an issue with regard to storing cable channels. I tried to auto store the channels unfortunately, some cable channels were not tuned clearly. So, I tried to Sort and delete some of the channels that I don't usually watch to see if the other channels i like to be stored would move to a better fine tuning but it did nothing to resolve the issue. In the channel list, you would see a C and S category but I don't seem to understand the differenc


... Flat Panel Televisions

Im trying to program channels ad it only programs 2 channels and now won't go back to the channel program feature. it skips over it


... Sharp LC-26SB14U 26 in. LCD TV

I try to do auto channel surch and auto channel up date and its not picking up any channels but channel 1 it was working just fine yesterday how do i get it to catch channel 2 through 12


Try this.... go into setup and make sure that analog tuning is selected... you could possible only have digital selected ... RCA HD52W59 HDTV Projection Television

I programmed my sudden link remote to my tv and turns my tv on an off, controls the volume, but when I try to change the channel of my television with the remote, the red cable light on the remote lights up as if it thinks I'm trying to tell it to change the channel on the sudden link channels and not the channels of my tv....help? (I know this sounds lazy because normally people would just say get up and change the channel but our tv buttons don't work and I don't have the original remote)


... Flat Panel Televisions

I recent purchased a 23" full HD LED TV from The Source. I have it hooked up to a Shaw PVR and have programmed the Shaw remote to access more channels and be able to program taping. When I first turned on the TV and was about to do the initail setup, it went from the Welcome screen to Channel Scan and despite my best effort I cannot get it to scan the channels. I tried pressing OK and then pushed the channel button but nothing happen. I then pushed Menu, scrolled down to TV and then channel


Hi there,\015\012\015\012There is always a possibility of getting a lemon when you buy any new electronic device, but I hope this is not the case here. From what you describe, it would appear that the channel scan is not finding anything ... Flat Panel Televisions

Digital channels are not being saved during auto program.


... Sony BRAVIA KDL-40V3000 Television

What does std, hrc, irc mean when I'm trying to auto program a samsung TV?


... Flat Panel Televisions

How do i auto program my philips magnavox tv to channel 73 without a remote control


... Philips Magnavox PR1906C 19" TV

We are having problems getting channel 3 on our Olevia television. We have Dish, and chatted with them and they suggested that it was the # 3 channel and 4 were not programed in. I tried to call Olevia and they are no more. Do you have a suggestion on how we might program # 3 channel and # 4. Thank you. Marya Mather


I cannot locate free user manual for your TV, what you need to do is to go into the TV Tuner setup menu and have the TV rescan for the TV signal, it should pick up the Ch3 or Ch4 signal from the Dish box (depend on what the Dish box RF output is set ... Syntax Olevia 527-S11 Television

I have a Toshiba 32a33 TV, I have tried to program channels into the TV but it doesn't work. I tried to do it both manually and using the automatic channel tuner but it doesn't work. What should I do? It can't seem to find any working channels on either TV or cable. All it has is the white screen no sound.


Either the tuner or the video IF stage circuit of your TV is faulty. Tuner has no repair, can be replaced as a unit. If the fault is with video IF stage, it can be repaired. But, both the work is skilled one. You must have through knowledge in el ... Standard (CRT) Televisions

It wont auto program channels,i have to do manually and when i turn tv off it loses all channels again


The main system memory IC to your TV is faulty. It should be replaced. It is a very small IC, having 8 solder terminals, and can be located very near to the main system control IC. ... RCA TruFlat 27F520T 27" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6419 seconds