Having problems with your Flat Panel Televisions ?

Dear sir, I gaved JVC LCD TV for cervice in kollam before 4 months. At this moment i did n't get the LCD TV. I contact many times, they are saying board problem. Actualy what is the problem idont know.sir, can you pls follow this matter.If u give ur email id, i will give the full detail. When i buy this lcd from abudhabi, they are told me internation warranty and good cervice i will get from kerala. Is this good cervice. I think you can take good action for my request. thank you very much for y



Answers :

Yea its good sevice.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Dear sir, I gaved JVC LCD TV for cervice in kollam before 4 months. At this moment i did n't get the LCD TV. I contact many times, they are saying board problem. Actualy what is the problem idont know.sir, can you pls follow this matter.If u give ur email id, i will give the full detail. When i buy this lcd from abudhabi, they are told me internation warranty and good cervice i will get from kerala. Is this good cervice. I think you can take good action for my request. thank you very much for y


Yea its good sevice. ... JVC LT-32E488 32 in. LCD Television

Picture problems My 4 year-old Panasonic VIERA TX-32LZD80 32 in. LCD TV is becoming unwatchable. The main problem is the picture keeps distorting and jumping along with a 'zip' sound or distortion to the sound at the same time. The distortions are horizontal and getting so bad I switch it off and give up trying to watch. I had a similar problem quite a while ago, then it got better and now its back - but much worse. Some channels just produce the odd small distortion,whilst others are unwatc


... Panasonic VIERA TX-32LZD80 32 in. LCD TV TV/HD Combo

I have a silvania Model No. LD370SC8 S and after 20 minuta the screen goes white i can see the blurry imagen but the screen stay white until i turn off the tv and let it cold down,the audio is fine and imagen work good for 20 minutes after get white screen,i replace the lcd controller board and the main tuner board and the problem still exist...any help...thanks in advance


Hello\015\012Have you checked the voltage at the video board when it goes white? Goes white screen means, only backlight is there, and no video at all. Check this. If loss of voltage or less than normal voltage it should be there, power swit ... Flat Panel Televisions

What's your problem?hi my samsung (i think its a series 6 the 1 with the red tint seround) lcd tv is getting 3 hoizontal lines across it, at 1st they came on for just a while then went to good picture, now i have them all the time ?


... Samsung UN46B8000 46 in. HDTV LCD TV

All 3 HDMI ports aren't working showing "no signal" (my main problem), but only port(input/source) on whole tv that works is RCA input/source(A-V,Y-R-W cords)


... Curtis LCD3227A 32-inch LCD TV

Kdl 40ex520 My LCD TV 40EX520 SER.No.S01-2006149-8 is giving a problem. I have not used it more than 100 hours. While I am watching a movie a area of 4 Inches from top of the screen started to give distorted lines.Now it has devloped to half the screen+the top area. This must be a manufacturing defect as it has been used only for very short period. But I do not have a warranty card. Could it be a problem of LCD Panel /T-Con or the software updating requirment. Please advice. Thanks. Jagath W


... Sony Bravia Kdl-40ex500 Series 40-inch Lcd Tv, Black

No channels I have a 27F520T RCA TruFLat tv. It has been unplugged for a while. I have plugged cable into it and it will not find channels. All I get is a blue screen. Have tried to auto scan and manual scan, no channels appear. Plug other tv in and get good pictue, cable connections good and tight, what do I do???? This the same problem I had. This not a solution , this is my problem.


Does the set have any audio/video jacks for input? ... RCA TruFlat 27F520T 27" TV

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

I am having problems getting cable on my TV. The cable man told me on the phone to change it to either #4 on the back of my cable , and then the cable will work. The problem I have is when I look into the back of my Shart Flat TV I could not find where I am suppose to switch to #4. Right now I cannot get cable on my Sharp Flat TV. Can you help with this, getting the cable working on my TV?? Where can I find this switch #3 or #4 behind my TV Monitor? Sharp Liquid Crystal Flat TV digital Mode


Like i said in ur other post u have to find the input or source buttons on ur remote. Also fyi it's never a good idea to post ur phone number on the internet. ... Flat Panel Televisions

I purchased a Toshiba LCD TV/DVD 22 DV500B for our great grand daughter in setting it up, I went through the auto set up, then it asked annolog yes or no I pressed yes thinking I would get a few extra annolog channels for her, all I ended up with was 4 good annolog channels and one not so good. To retune the manual states. Press MENU on the remote. Select SETUP and then INSTALLATION. I press menu but only get picture/sound quality changes. 6 different areas of change but no SETUP


Hey, i had this exact problem, made the same mistake with selecting yes. Worked out the solution is to press the source button, then scroll down one to DTV/USB, and this will be the free view. Hope it helps, Ben ... Toshiba Flat Panel Televisions

I have a 47 inch 3d lcd vizio tv. My problem is when I power it on the screen comes on with the V logo and it gets stuck there. At this point I cant turn it off, I need to pull out the plug. It used to be a onece in a while problem but now it wont get past the V screen.


... Vizio VO47L 47 in. LCD TV

I have a Philips 42pf7421d/37 lcd tv having problems. When you first turn the tv on it seems to work perfectly fine. About 5 minutes later my picture cuts out and I get a scrambled screen. Turn it off and on, same problem. Any ideas? Hoping I can get this fixed cheaply doing it myself. Im handy but dont know much about televisions. Thanks


First, you need to make sure all of the vent panels on the tv are clear of obstructions. Heating may be causing the problems. Next, get a hold of a clean, dry source of forced air and blow out the inside of the case and the internals of the tv. ... Flat Panel Televisions

Sony_bravia_lcd_32 I have LCD TV Sony 32 s series its problem shows the image Slow Motion, but from video Output socket is good then I change its tican board but there is still same problem Please help .


Firstly, change the input device to some other that you know, works. If you experience same problem, there is some defect in the display board and this might require the attention of a qualified service technician. ... Flat Panel Televisions

Hello, I have a LCD TV. MITSUBISHI Mod. #LT-40133, the right side of the tv. when the tv get hot (after 30 or 40 minutes) show vertical lines that cover almost all the right side. We replaced the Logic board, but the problem persist. Additional thing: if you hit the back cover in the right side, the tv get fix for some minutes (5 or 10),after that, the problem come back.


Your logic board isn't at fault. You need to replace the backlight inverter. It sounds like it is overheating...then causing your LCD panel to over heat...causing the line problems!The backlight inverter is located in th ... Flat Panel Televisions

I have no picture but have audio. Problem occurs AFTER playing games on a Sony Playstation. After you get done and switch from the Input from the Playstation to Digital TV you get a blank screen. If you do not change inputs and just watch TV the problem does not occur. When this first started happening if you hit the side of the TV the picture would come back. Now its gone for good. TV is only a few years old.


Hi jgslote,\015\012\015\012This is an indication of bad solder joints in the I/O board section where the DTV cable connected. You have to re-solder this cold/dry/crack solder to cure the symptom. This is hard to spot, I would advice you to work ... Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

Hi. I have an LG 47LB9DF-UA LCD TV with a video problem. Originally, I had problem with horizontal lines, accompanied with a lag. After a short time the screen would then get multi-colored vertical lines. If I turned the tv off, then back on, the lines would be gone. If I left it on, the process would start over again. I opened the tv and found two connectors from the power supply board to the main board loose. After removing then reconnecting them several times, the problem cleared up. I l


... LG Flat Panel Televisions

What's your problem?LG 23LX1RV TV/DVD Combo ... takes at least 5 minutes from turning on to get it to quite rolling ... I was told that it needed an igniter ... is that true?


If your problem is slow start up, it sounds like pwr sply.There are no svc bulletins concerning anything similar. Pwr sply provides 24/12 and 5volts to main bd. Could be bad filters in area with improper voltage.bob bjtv ... LG 23LX1RV 23 in. TV/DVD Combo

I have a lg lcd (32 inches) , whenever i turned on my tubelight or cfl it gets closed for 4 to 5 seconds , plz give me some valuable suggestions , ur help will be highly appreciable


Use a line extension adapter with surge suppressor. There is no other way. ... Vizio L32 32 in. LCD HDTV

Blackness comes into the screen. It is a JVC 37 in LCD. Was unplugged for a little while when I moved. Was good for a couple of weeks. Now is getting worse. I submitted this once but was also asked fo


That means the LCD panel has gone bad. LCD panels can't be fixed, although you can have them replaced. Unfortunately, nine times out of ten it is cheaper to just buy a new TV. If you do want to have it replaced you have to contact the manufacture and ... Standard (CRT) Televisions

Still having the problem.Apparently as I only have a universal remote I am not getting the installation option on the set up menu. Have been told that there may be some way of over riding this problem


... Flat Panel Televisions

I connected my 32" Funai LCD TV to PC CPU with VGA cable. I could watch the movie once. However, not able to get the connection again. TV gives message "Not Support". Do i have to change the settings somwhere in the computer or TV? After connecting the VGA cable when i start PC, i get display on TV up to "starting Windows" but TV goes blank after that with "No support" message. Pl help.


... Funai Flat Panel Televisions

BLANC SCREEN My 42" RCA LED47A55RS just went puff.. when I was watching a video. I don't get any picture. The screen is blank. If I leave it on for while it gets about 6 vertical white lines for about 1 minute and then its blank again. No sound either. Check for bad or burnt capacitors and other parts but everything looks good. The only board that smells bad is one near the speakers, lower part, a small boatd that has to connections going to the LCD screen. I checked for the part number but


... RCA Projection Televisions

I've got a Tek 82cm Platinum LCD TV. The problem is as follow: It was working fine and the next day it was not. I try to search for the tv channels but it does'nt fined any channels. The av is working but i can't get the tv channles. So i can't watch tv. What could it be and what can i do or try to get it working again to watch tv.


... Flat Panel Televisions

I have an Olevia 227-S11 LCD. I am not getting any output 12vdc nor 24vdc. The output caps look good. Fuse good. What else can I check


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1315 seconds