Having problems with your Projection Televisions ?

I WANT TO KNOW WHATS GOING ON WITH MY TELEVISION. WHEN I TURNED IT ON NO PICTURES WILL SHOW ON SCREEN BUT THE SOUND COMES ON THOUGH. I TRIED TURNING IT ON AND OFF BUT NOTHING HAPPENS. I EVEN UNPLUGGED IT TO SEE IF IT WILL HELP BUT STILL THE SAME. THE POWER BUTTON ON TV KEEPS BLINKING NO MATTER WHAT. I JUST WANT TO KNOW WHAT I SHOULD DO?



Answers :

You may need to replace the bulb

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I WANT TO KNOW WHATS GOING ON WITH MY TELEVISION. WHEN I TURNED IT ON NO PICTURES WILL SHOW ON SCREEN BUT THE SOUND COMES ON THOUGH. I TRIED TURNING IT ON AND OFF BUT NOTHING HAPPENS. I EVEN UNPLUGGED IT TO SEE IF IT WILL HELP BUT STILL THE SAME. THE POWER BUTTON ON TV KEEPS BLINKING NO MATTER WHAT. I JUST WANT TO KNOW WHAT I SHOULD DO?


You may need to replace the bulb ... JVC HD-56G787 Television

Phillip 50PF9630A/37. I have a red blinking 7 times after a green light. i've allready replaced the 2 bulging cap on the bottom of power supply board and also a cap on the Y board (board on the left) although i sodered it backwards with negative on the wrong side, i imediately resodered it and it sitll doesnt work. i've even isolated and unplug the y board and x board independently to see if it will still give me a blinking red lights and it still does. i've checked every capacitors and fuse on


Hello sir Jose!!!!try to unplug the y sustain only and power ON your TV..and see what happen next..Please reply to this tread for immediate help.. ... Philips Flat Panel Televisions

LG 32LB9D Hi there, my name is felix and i just want to ask you for help, i changed already the bad capacipor on my lg 32lb9d but i still having the problem that i has to plug and unplug the power cable couple of time to have sound and picture on my tv or i have to leave it on for several minuts until warm up. could you tell some idea of what to do to fix the problem? thank you for your help. PS. if i desconnect one of the cable locate at the top right hand side and plug it back the picture and


... LG 32LB9D TV

Hello. my samsung HL61650A 61'' DLP tv is about 2.5 years old, and tonight it just shut off. tried to turn back on, got 2 'buzzing' sounds from the back, but it wouldn't turn on. unplugged, undid back cover, put blue switch to 'down', still no luck. now, it won't really even try to power on, and standby & lamp LED lights blink. do you think it is solely the Lamp that needs replaced? help!?


... Samsung HL61A650C Television

The freeview box froze and the remote cannot make it work,it will not even turn it off(we checked the batteries and they are ok). We turned it off at the main plug then back on again so see if we could reprogram it but it just comes up with...Please wait whilst the hard disc initialises. Unfortuately that was yesterday and it still hasnt initialised! Can you help we have a lot of programmes recorded and dont want to loose them,also we the freeview box is only over 1 year old(out of guarantee t


The processor is locked up and can't recognize the remote, unplug the cable box and TV from wall for40MIN. and that will fix your problem. ... Flat Panel Televisions

Samsung 40 Inch LCD LNS4051D has voice but no video..video was going out from time to time, but now has complete gone out , but I still have voice. When powered on, i cannot even see in the uppe left corner the inputs when chnaging them. So i know it's int he TV.


Hi, probably the defect might be on the inverter board or power board. possibly there might be a loose contact since it encountered an intermittent events. check if it has a shadow like picture. If it has, it is in the inverter board. check some capa ... Samsung LN-S4051D 40 in. LCD Television

I have a Gateway p46m103 flat screen television that will only turn on after plugging and unplugging the power cord many times. It would eventually turn on each time I tried this. Now, however, the green power light comes on, and I can hear it is on, but the screen is all black. I even tried pressing the Input button on the front of the television, to see if I had accidentally changed it, and even the icon on the screen will not show, to see if I am seeing the cable box, or the dvd player, etc.


... Gateway PLSM46TV 46 in. Television

Hi, I have a lg 37lc2d. I turn on the tv, the green power blinks for about 5 seconds. Then all I get is a black screen and no sound. I unpluged the tv from the bluray player and the directv box, and plugged in again, and still the same issue. Why did I unplug everything? To see if i could get the "blue screen" or at least the menu, but no, that did not happen, still black screen, and no sound. Any suggestions? This product has been discontinued, and I have done searches to find that I am not the


Wow I have the same problem! Just happened today same model & everything.This stinks! ... LG 37LC2D Television

My Panasonic 1080p TC-5-ps14 TV will not on when I turned power on. What I did was unplugged the power cable. Pushed on the power button for two minutes. Then plugged the power cable back anh turned on the TV. TV still won't turn on. What is the problem? Please, help!


... Panasonic TC50PS14 Plasma TV

What's your problem?i have mitsubishi hd-4001 controller input box and it don't give any display to the tv even if i can see the power led is on ...i know that


Box could need to be rebooted--unplug power for a while and then power back or BOX IS BAD. ... Projection Televisions

I have no power on my Hitachi model # P42h401 Serial # V7jo77613 NO POWER, I changed the power cord and still nothing. I do not see a reset button. Help !!


... Hitachi 42HDS69 42 in. Plasma Television

My flatron m1910a lg monitor /tv will not display anything. it seems to lightly flash the screen but then goes black right away. If I power it off with the power button it seems to want to power itself back on without my help. I have tryied to unplug it and plug it back in. It is now currently working for me but it did the same thing yesterday morning as well. can you suggest anything or need more information


... LG M1910A 19 in. LCD Television

No Power to the TV. I have unplugged it, tried a reset, and tried a different power cord and still no power. The Vizio emblem does not even light up at all.


Check the power source?Yes.Tv have a dead power supply board.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement. ... Flat Panel Televisions

My tv video and audio cut out after 30-60 mins of watching or playing my xbox. instead of the regular green power light i get a flashing yellow light. if i unplug the tv for 30 mins or so it powers back on but still shuts down after 30-60 mins help please


Is the back of the T.V. unusually warm/hot? If it is your T.V. may be overheating. If it's not in an open area, move it to an open area to allow more air flow. If it is try directing a fan at it. If one of those helps then your T.V. might be overheat ... Tatung V30DMTT 29.6 in. LCD Television

I have a baird x47dtv and we turned it on today but had no picture or sound. the blue power light comes on and flickers as it should on startup of tv,however we are still not recieving a picture. i have replaced the psu's approx 6 months ago so i know theres no problems there,but am unsure which part i need to replace as it could be 1 of three things. 1 it could be the main board, 2 it could be the power invertors or 3 the screen. any tips would be helpful


Tried to disconnect first the supply voltage of the inverter board and then turn on the tv. if the indicator stay which mean the inverter board would be the cause of shut off or the tv turn to safety mode. ... Flat Panel Televisions

I have a vizio vp422 that made a loud pop and now doesn't have any picture or sound. When you power it on the vizio display light turns from amber to white but that's it. U have to unplug it to turn it off. I have checked the fuses and they are good. The capacitors look good visually. There are a couple on the power supply board that have a black cover over the top, so I don't know about those. I changed the main board and made no difference. Someone please help!


Replace its power supply regulator board as card basis. ... Vizio Standard (CRT) Televisions

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po


Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

I have a philips 42pf7320a/37b that has 7 blink code error. When I unplug the wire that link the power supply with Y sustain board and When I unplug the white wire that link the y sustain board with the logic board the tv turns on and off like a working tv. But no picture and sound.I want to know which board I should change to solve the problem.


... Philips 42PF7320A 42 in. Plasma HDTV

I am trying to hook up a gamecube to a toshiba tv. I don't know the model number but it has 3 inputs in the back and one in the front. I have tried all of them and tried changing the input on the tv to one of them but it only stays on tv. I don't have channel 3 and I don't know how to add it. I have unplugged the cable cord also seeing if that would work and nothing. Please help.


... Toshiba Flat Panel Televisions

I have an lg 32ld350. I plugged in headphones into it as to not annoy anyone with the tv and when i was done i unplugged them and now i have no sound unless i use headphones. Even with them unplugged it tells me that it's still connected when i try and reset the audio in the menu. All audio settings in the menu are grayed out and it won't let me do anything. Please help.


Turn off ur tv.Tries take the head phone steal jack plug it in and unplug it out do this like three or four times.Tries the tv menu audio resetting again.The audio should return.Don't used ur tv head phone again the input jack socket it have problems ... LG 42PX5D 42 in. Plasma HDTV

Green light flashing fast and tv will not power up. have done master reset, unplugged, waited and replugger. unhooked all components and reset. friend has a ws46 and it has started this too. hers started after a power outage. help! i do not know what else to do.


How do i fix it ... Mitsubishi WD-52525 52" Rear Projection HDTV

I have a samsung syncmaster 320p and my screen would just flash and flash with the blue light you could change it to component and all that except it would still just flash. now it will not even turn on it does not have the power light even come on when we plug it in. if you could help me i would appreciate it thanks.


... Flat Panel Televisions

I have a 36 inch Panasonic CT-36B30D TV. After i turn it on i can see the screen slowly pushing outward. when it finally stop pushing out it become so wide so that am unable to see what is on either sides of the screen it also has hourglass look, in other words anything that is vertical would have a bend in it. height i okay. i even changed the vertical ic and all the condenser oround that area and it still didn't work. can someone help me please.


The problem may be in the yoke, or pincussion circuits. ... Standard (CRT) Televisions

Have 32" JVC TV AB-32D302 with full black screen and sound. In caption menu you can see words still no pic even if our converter or VCR is hooked up. We have an atenna. PLEASE HELP!!


It sounds that the horizontal output section circuit has the fault. It is really a skilled work. Seek tech support. ... JVC Standard (CRT) Televisions

We have a samsung television that is few years old. All of a sudden we had thick green and purple vertical stripes over the picture and sound was fine. However, playing the xbox or watching a dvd, it looks perfect. I found that when we unplugged the power cord, it would be fine for a while. But now that isn't even helping. Today it seems that the sound went as well! Time for a new one-or simple fix?


... Samsung PN50A550 50 in. Plasma TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1769 seconds