Having problems with your Projection Televisions ?

Picture has progressively darkened over the past few months. Replaced the lamp which did not help. Next place suggested replacing te lamp ballast which did not help either. Now I'm being told it s



Answers :

You might want to talk to JVC as this model had all kinds of issues--missing any color, picture inverted or backwards just to mention a few.

The solution was to connect it to a computer and use a jig from JVC and download two up grades on sd cards and install them manually.

I mention this as the Light engine in the set communicates with the main chassis and you in fact may have a issue with that.

At least make a call to JVC---saw about 40 sets with this model where this cures all sorts of communication issues--the engine if "set" wrong could easily cause this problem.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Picture has progressively darkened over the past few months. Replaced the lamp which did not help. Next place suggested replacing te lamp ballast which did not help either. Now I'm being told it s


You might want to talk to JVC as this model had all kinds of issues--missing any color, picture inverted or backwards just to mention a few.The solution was to connect it to a computer and use a jig from JVC and download two up grades on sd c ... JVC HD-52G786 52" Rear Projection HDTV

Replacing fluorescent lamp ballast wiring question


... Projection Televisions

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

I have a samsung dlp model hls5086wx/xxa that recently stopped working. Lamp light came on so I assumed the lamp needed replaced. Replaced the lamp and still won't turn on and lamp light blinking. It also make a whining noise when turned on but I don't get a picture. Is it the color wheel or ballast? Any suggestions?


... Samsung Projection Televisions

I just replaced both the lamp & ballast on my LG 52SX4S (5 yrs old). The front indicator light scrolls for couple minutes, then top 2 lights turn red with second light blinking. Then the top light stays red for minute and it repeats the process. Someone suggested the power supply board should be replaced, what do you suggest>


I have had the same model HDTV and had the same issue. It was the power supply and I got it replaced at a TV repair shop for 300.00. ... LG 52SX4D 52" HDTV

I have a RCA M50wh74s Have no picture but have sound. I have replace Lamp and ballast on set still no picture, someone said it may be power board please help?


... RCA Projection Televisions

The lamp is a month old, I replaced the Ballast. TV has sound but no picture & turns itself off after about 30 seconds. need help.


... Mitsubishi WD-57732 Projection Television

I have an LG 52SX4D I just replaced the lamp in the darn thing and all of a sudden the sound wont come on now. So now I have picture with no sound. I tried hooking up my blue ray player but no sound from that either. Any suggestions?


May be a good idea after dumping money into it for nothing...... ... LG 52SX4D 52" HDTV

My 62hm15 tv has red and green led ligts blinking, replaced lamp with no result. saw ballast and colorwheel suggestions can i fix myself? if so, how?? thanks!!!!


... Toshiba 62HM15 62" Television

I have replaced my lamp in my DLP model WD-62526 Mitsibishi but the screen is dark, so dark that I have to watch it with teh light off. But the funny thing is it isn't as dark as it was when it went though. I hav eremoved the back to search for the ballast but I couldn't find it. I think I would have to remove some more components of the Tv to see where it is. Could it be possible that one of the fuses could of went in the tv which is causing the tv to be dark. Also the HDMI doesn't work either.


... Mitsubishi WD-62526 Projection TV

My audio for my Westinghouse vr4085df went out. I took it apart and I need to know which part controls the audio so I can replace it. It is not just the speakers either since I have surround sound and still not working. Any suggestions or answers would be helpful. Thank you


... Flat Panel Televisions

We have replaced the lamp and the picture is still dull and dark. Would cleaning the fans help, or what do you suggest?


... Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

I replaced both the ballast and lamp. still cycles 9 times and goes into protection mode (both lights on). I am $300 into this and still a dead TV. Any help would be appreciated.


... Flat Panel Televisions

Replace lamp and ballast, still get code 66


... Mitsubishi WD-62531 Projection Television

Mitsubishi wd-73737 turns on for a few moments then the picture flickers and turns off after a new lamp replacement. A red led appears and I get error code #34. I have carefully cleaned dust out of the unit as many people have suggested but I am still having this issue. I am using lamp 915B403001 purchased from an official Mitsubishi reseller. This is the second time I have replaced the lamp, the first replacement worked perfectly.


... Mitsubishi WD-73737 73 in. HD-Ready TV

Samsung HLT5075SX/XAA. TV is around 3 years old. Once TV is turned on there is no sound coming off, green light is blinking then turns into red then tries to start with green blinking. Fan turns on when red light is on. Then after a bit all of light blinking. Replaced lamp, that didn't fix it. Was told here to replace ballast. Replaced ballast the same problem occurs. No ballast light when the TV is turned on. Bought the service manual.


... Samsung Standard (CRT) Televisions

I own a Philips DLP television model 50pl9126d/37 I just replaced the lamp on it less than 6 months ago and the red lamp failure light came on. I have opened the back and can see the lamp starting up for about 5 sec but then it quits. I have read a number of issues but was wondering if anyone who has had this similar problem figured out the solution. I have pulled out the lamp ballast but as far as I can see there is no sign of damage. When the ballast was in I removed the lamp and could see the


You might want to with a flashlight and or small mirror want to look where the lamp faces at the color wheel---it must be intact and not missing any segmentstypical color wheel: ... Philips 50PL9126D/37B 50" DLP TV

Hi there, my sony grand wega kdf60wf655 had stopped working and was flashing 5 red lights. I tested the voltage from the power board to the lamp ballast board and got a 272v dc. Just replaced the lamp ballast board and now get blinking lamp indicator. Tried a new spare lamp that i had in reserve and still flashing red lamp indicator every 1 second. Any ideas? thanksp i


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

Wd 60638 mitsubishi model wd 60638 the lamp burned out it was replaced it with a new one now red light on no picture. ballast replacement ;;ballast replacement mitsubishi model wd 60638


... Mitsubishi WD-60638 DLP TV

My toshiba 52hm95 i still without a picture replaced the lamp and the ballast,the color wheel spins(cut the knob with the plastic tip attached from the lamp access door to get it to power up while firing up had my meter hooked up to the lamp plug from the ballast and found to would read 2.5 volt then drop out,what is the problem. thank you


Did you change the bulb or the bulb with housing. 2.5 volt is start up volts. this is to check if the bulb is there or not. check that you have the bulb connected good you can test the bulb with a meter. on rear occations the bulb may not work even ... Toshiba 52HM95 52" HDTV Projection Television

I picked up a Mitsubishi Model No. WD- 62527. The guy said all it needed was the lamp replaced, I replaced it and the tv still doesn't turn on. Their is a green light that blinks were it says timer for about a minute then the orange light under lamp turns on. About a second later the green light under timer blinks three times then turns off and then the only light on is the lamp orange light. It will continue to do this hole scenario over and over again...HELP!


... Projection Televisions

I recently replaced my the lamp in my pt50dl54j with a new tyla2004 lamp, but there still is a black screen and the words "replace lamp" still comes on, but the menu and channel search for my direct tv still shows when i push the button. please help!!!!!


The tv projection lamp on,now tv have alots clicking noises too?The board call the Ballast is also dead,require replacing.This Ballast board job is to ignite the projection lamp. ... Panasonic PT-50DL54 50" Rear Projection HDTV-Ready Television

Lamp was replace, color wheel and now ballaster and now the bulb does not turn on.


The only thing I can think of is be sure the safety switch on the back is not your problem. ... Projection Televisions

Looking for a replacement lamp also. one said to check bulbtogo but they dont have them and it seems like nobody else does either. wondered if anyone had any luck after posting that they couldnt find one. does anyone know what the voltage and wattage is for this lamp. i guess if all else fails i could try to remove the bulb itself and replace it with something close. that or im out a $9,000 TV...


Mats Electronics Sales Lamps for $89.00- $139.00 1-800-628-1118\012Lamp PN# 915PO16010\012Look on EBay under Electronics TV/Parts type in Lamp number. ... Mitsubishi WL-82913 82" Rear Projection HDTV

Replacing SAMSUNG BP47-00043A LAMP-BALLAST - Samsung Bp47-00043a Lamp-ballast Vidi 65 Oem Original Part


... Samsung Bp47-00043a Lamp-ballast Vidi 65 Oem Original Part

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 5.0293 seconds