Having problems with your Flat Panel Televisions ?

I lost reception for one station on this set the other tv is fine. I can't receive channel 10 and I did try to add this station .


\015 Channel is the strongest station from our outdoor ant. I did an add on channel search to no avail.\015

Answers :

If only one channel not likely a issue with the set but a direct enter with the numbers on the remote should take the set there and then in the menu you should be able to "add" it to the memory.

As a last resort place this set where other set that is working is and see what happens..............

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I lost reception for one station on this set the other tv is fine. I can't receive channel 10 and I did try to add this station .


If only one channel not likely a issue with the set but a direct enter with the numbers on the remote should take the set there and then in the menu you should be able to "add" it to the memory.As a last resort place this set where other set ... Insignia NS-LCD26-09 26 in. HD-Ready LCD TV

I am trying to hook up a gamecube to a toshiba tv. I don't know the model number but it has 3 inputs in the back and one in the front. I have tried all of them and tried changing the input on the tv to one of them but it only stays on tv. I don't have channel 3 and I don't know how to add it. I have unplugged the cable cord also seeing if that would work and nothing. Please help.


... Toshiba Flat Panel Televisions

Hi, i have an LG 42LH5000 which is about 18 months old. Recently I lost all of my digital tv channels, each one said no signal. I re-scanned the channels and got most of them back, however the following channels will not be detected ni matter what I do, ITV, Channel 4, Channel 5, ITV 2, Dave Ja Vu, E4 and E4+1. I thought it might be the antenna but my flat mate uses the same roof antenna as me and he receives all of these channels fine. I've tried unplugging it from the mains power and also perf


... LG Flat Panel Televisions

I cannot get my stations to log in and stay on my t.v. When I scan it, will only hold on channel three. I turn it off and turn it back on and three is still there. However, if I try to change the channel it will not pick up another channel and then it also loses channel three. I have to scan all over again. I have purchased a new antenna and it still does not work. Channel five popped in one time and left again. I cannot find my instruction manuel. I purchased the t.v. 3 mos ago at HHGre


... Coby Flat Panel Televisions

My receiver is humax cl 5100 .whenever i install new channels all the old ones are removed and i deleted all the channels and tried to reinstall them but i get an error says "save limit ecxeeded " n now i have no channels :(( plz tell me what to do !!


... Flat Panel Televisions

The dvd player works, but no tv stations. Tried to go to the tuner and auto program to add channels, but will only delete the channels. I can't figure out why the TV picture won't work. Any ideas?


HelloThere is a memory IC, a very small one having 8 solder leggs, that stores the channel conditions and all other details of picutre, such color, contrsat, brightness, sharpness etc;. Eventhough it small in size, the function with it when the ... Apex Digital AT1314DV 13 in. TV/DVD Combo

It was on cable tv for years, no I want to disconnect cable and just use it as a TV to receive local broadcast stations. When I tried this, it says "no signal" on any channel other than "video 1" etc.


Since this TV has only an analog tuner and TV broadcast in USA is now digital, you'll need to add a converter box that normally connects to the antenna input, please check out the following link for more details: ... Sony FD Trinitron WEGA KV-32FS120 32" TV

Receiving channels We are in a campground using our insignia remote and can only receive a couple of channels. When we go to another channel and try to go back to the original channel it is gone?? When we were at home we received several channels. We are in New Orleans not in a remote area??


Tried to save those channel in the memory. ... Insignia Flat Panel Televisions

I connected an expensive aentenna to my Philips 17PF9945 17" Matchline LCD TV - widescreen - HDTV Monitor. I do NOT have cable TV service. The reception is 4 very strange channel and very clear: Channel 6 with FM Station 87.72 is just music and the station Logo on screen, and Channels 23, 41 and 74 are paid programming that are very clear and sound is perfect. I want to be able to get my local Chicago TV Stations: 2, 3, 4, 5, 6, 7, 8, 9, 10 and so forth. I went into the "Menu" and I cannot figu


Go into the user menu and reprogram the stations. Make sure that it is set to program digital channels only. Not analog. ... Flat Panel Televisions

I have a JVC model AV - 48P776 and i cant find the HDMI channel. i try to connect my PS3 to the HDMI but cant find the channel. the only channels are: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, and DIGITAL OUT. and believe me i have checked every channel. (VCR, DVD, GAME, etc) and still no HDMI. please help i really want HDMI


... JVC AV48P776 48" CRT TV

My Sanyo AVL 209 t.v. is only working on one channel. It shows the channel at the top but if I try to chage it stays on the same channel but goes fuzzy. This all started with a broken remote. I am now ttrying to do in by the t.v buttons. I think Source is the problem. I put t.v. as the source but think I have the wrong input. How do I change it. I am connected to a HD box and am totally confused. I have tried unplugging for an hour. No luck . Unable to change to another channel.


... Sanyo AVL-209 LCD TV monitor power supply ac adapter cord charger

Cannot change channels with remote or manually on the satellite receiver,tried the "fix" answer but nothing works. I can change channels on the receiver but to get another channel I have to do it sa


... RCA Standard (CRT) Televisions

Toshiba 26AV500U This is being used as a 2nd set connected to a DishNetwork receiver. The set must be tuned to channel 73 to receive the signal, and no matter what I try the TV will not recognize 73 as a channel. I am at a loss at how to force the TV to tune to channel 73. Thanks for any ideas!


Tries tv unplug,replug it back like about an hour later.For forcing the tv do a resetting itself back to the factory setting.The tv now should be recognizing channel 73. ... Toshiba 26AV500U 26 in. LCD HDTV

I am trying to tune the freeview channels on my new matsui M15DIGB19 tv. Freeview is built into my tv. However, it will only let me tune bbc channels and not all the freeview ones. I have an aerial plugged in aswell. What do I do to get the freeview ones?


You need a HDTV anteena ... Combination Televisions

Some kind of weird hdmi surge took out my cable box hdmi output, the hdmi through my onkyo receiver and Mitsubishi wd-65c9 tv. Everything else associated with the components works fine. I tried all the normal stuff including unplugging and initializing the tv. No go. leads me to DM board? After initialization the tv will recognize a connection on hdmi-2 and 3, but will not work. The hdmi-1 port nothing. That is the one the surge came through (the one hooked to the receiver). Would like t


... Mitsubishi WD-65C9 65" DLP HDTV

I have Panasonic TX-32LXD60 LCD tv with built in freeview, its now 5 years old and the freeview system is frozen on one channel. Is there a quick fix to reset this as I have tried going into the DVB menu but it does not allow me to access it becuase freeview is just frozen but the one channel works.


... Panasonic Flat Panel Televisions

Can not receive digital channel when I m in the antenna mode, I can receive one digital channel if i'm in cable mode,


Digital channel cannot be received through antenna, unless the TV has a compensation circuit within. Looks like your TV does not have. Anyhow, I suggest you go through the operation manual of the TV. ... Polaroid Flat Panel Televisions

No Signal Watched a DVD, when we switched back to watch TV there was no picture and it said no signal. I tried another TV to make sure the problem was not the antenea or the cable. All checked out fine. It did this once before and we found all the stations were one point off, for example 10.1 was now 10.2. We manually restored all stations and all has been well until now. I have tried many things and I can not get a picture back. In diagnostics it says my signal strength is zero. Thank you, Greg


Have you checked on all inputs including the rear audio and video jacks? ... Sony KDF-50E2000 50" HDTV

Dark screen husband rolled over on the remote, have directtv all other tvs work well just this one dirrct tv says its the tv not them scsreen is dark can see red green and blue thats all the light it puts out also it seems to be in analog mode and I can't see the screen to try using system setup I tried going to tv mode and changing the channel to line one to or aux/ but can't get it to go there any ifeas


... Sansui TVS2750 27"

Hi! I have a Sharp LC-37D7U and my cable company just started switching to digital at the rate of 20 or so channels per month. I was able to receive analog cable or digital cable through my analog cable receptacle on the TV, but only one or the other. So I put a signal splitter on the cable coming into the house and ran one line to each input and then it worked perfectly. I turned off the set and went to bed. Today I get no digital signal, only the signals from the remaining analog channels.


No it's not your TV set maybe you're cable company is not feeding the digital signal or having technical adjustment/problem you can inquire from them about the digital signal they are providing...and let me know it so we can proceed to other steps.. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

Viewsonic n3290w-au Initially digital audio and video were out of synch, and epg was showing no information for all channels. Ran the auto tuner again and it won't find digital channels at all. Analogue is fine. Have checked cable from tv all the way back to antenna on roof, can't see any problems. What can I check next? Trying to get hold of another tv to check if signal from antenna is okay. Haven't tried a different fly lead, but if analogue reception is perfect then surely the cable is fi


... Flat Panel Televisions

I have a Westinghouse 26 inch LCD tv model ak-26h240s. We watch only 2 channels on this set twice a day. Lately when we turn the TV on we momentarily get sound then the sound goes off. We tried other channels and they work fine and we receive sound...but not on our preferred channels. During different times of the day we will turn these two channels on and everything works perfectly. BTW, this television is in our bedroom and we use it to watch morning and nightly news.


... Westinghouse 26" LCD Flat-Panel HDTV

Toshiba TV model 42AV500A channels keep changing randomly. Even when in HDMI mode it will switch back to DTV and then continue switching channels and not locking on to any single one. Occassionaly it will lock on a channel for a few minutes then it will continue to switch channels. I tried factory default restting and changed batteries in the remote. Also I turned off TV and unplugged and restarted. Still does not help.


... Toshiba 42AV550 42 inch HDMI Multi-System LCD TV

I am having 21inch CRT BPL color TV. when i switched it on channel is coming and its automatically tuning and only grain are coming.. (means missing channel) I tried auto tuning,semi autotuning and manual tuning its not working. But Fine tuning is working until i stick to one channel. howerver if i change the channel , same problem occur.. Please help me in this regards


Check and replace its main system memory IC. It is faulty. ... Standard (CRT) Televisions

I have a GE guide+ gemstar model 31GT740 i cant get cable reception the cable is fine as i hooked them to another tv and it worked fine i did auto channel and it scanned all channels when it was done it said no channels found please help thanks


Your have problem with the system IC's which store the channel and all the control in the TV or it can be remedy by soldering the pin of the IC's if the problem persist well your have to replace that system. ... GE 31GT740 31" TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 1.8494 seconds