The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
T.V. all of a sudden started changing inputs all by itself. I was watching it one day and the menu screen popped up and started scrolling through input options then selecting one at random and changing. I never touched the remote!!! I tried turning it off and turning it back on and i still happened. I took the batteries out of the remote and it still happened. I even unplugged the tv for a while and plugged it back in and still doing the same thing. It happens every couple of minutes, any adive?
The only thing you can do is replace the Main Board, which will be about 1/2 of what you paid for the set. I don't recommend it. ...
Insignia NS-LCD22-09 LCD HDTV
I have a Polaroid 2611-TLXB TV that was manufactured in September 2007 and recently, I turned it on one night and there was no screen at all. The blue power light was on though and I could turn it on and off with the remote but still no screen. I tried unplugging it and plugging it back in but nothing changed. I checked the back and there is a red blinking light.
Polaroid 2611-TLXB TV
Toshiba TV model 42AV500A channels keep changing randomly. Even when in HDMI mode it will switch back to DTV and then continue switching channels and not locking on to any single one. Occassionaly it will lock on a channel for a few minutes then it will continue to switch channels. I tried factory default restting and changed batteries in the remote. Also I turned off TV and unplugged and restarted. Still does not help.
Toshiba 42AV550 42 inch HDMI Multi-System LCD TV
I have a lWT3206 32" Analog/Digital and while watching it yesterday on channel 55 it flipped to 44 and then to 4 about 15 seconds later. I changed it back with the remote to 55 and it did the same thing again. I went to put it back again and the remote wouldn't work. I have unpluged it, waited about 2 minutes and manually turned it on and put it on different stations. It doesn't matter what station I put it on it just keeps flipping back and forth from 44 to 4. Sometimes it will stay on one
Flat Panel Televisions
TX-P42S11B Hi there my Panasonic TX-P42S11B has just turned it's self off!
The red light was still on as though it was on stand by. I tried turning it back on using the remote, it makes a hissing noise at the back of the tele then turns off.
I've unplugged it all for over 10 mins and tried again, this time using the button on the tele, the same thing happens.
The only thing I can tell you that might help is the red light is on and doing 5 flashes, then stops, then 5 flashes again!
I hope what I
Panasonic Standard (CRT) Televisions
We were just watching tv and it just shut off. Now it won't turn back on. I already unplugged it and still nothing except for the green light will come on for a second then turn right back off. You can only use the power button on the tv not the one from the remote. This tv is a Sanyo 50" plasma tv model #dp50740
Now tv on,power LED light indication flashes?Yes.The power supply board is the problems and the causes.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement. ...
Flat Panel Televisions
We bought a new Bush 42 Inch 3D TV about 4 weeks ago and came home today to discover it would not switch on. To begin with the red light was on but the remote control was not doing anything. When we turned the TV off at the socket and then turned it back on again the red light did not even come on and we still cannot watch TV. Nothing happens when we push any of the buttons. We have tried the TV at different outlets and have changed the fuse in the plug. Is there some way we can remedy this?
Flat Panel Televisions
Have a PT50DL-54J . Just changed the lamp and it will not start back up.Just a blinking green light. For the past while theTV has been displaying "replace lamp" but I couls still watch it. Then one day it would not turn on at all. Same green blinking light. I thought it was the bulb because of the error message saying so. I changed the bulb and its THE SAME PRWhat's wrong. Does it need to be reset somehow or something or am I SOL
Panasonic PT50LCX63 50" Rear Projection HDTV
Vc3207 v7 tv/combo dvd player, turn on tv, worked, changed channels, worked, when back to orginal channel, stayed on for a couple of minutes then the screen went black, the little red light came on. tried turning tv on manually , nothing happens. unplugged tv from wall, after 5 miutes repluged , still the same, nothing works except the little red light in front. regards brian
My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur
Philips 50PF7320A 50 in. Plasma HDTV
I have a Phillips Fla screen and a few days ago it started making this loud buzzing/hissing sound that somewhat goes away once the TV is on but comes back with a vengeance when we turn the TV back on i have even unplugged the TV from the wall and the noise is still there, can someone kindly help me please?? I really don't have the money to replace it with a brand new one right now
Most likely if a buzzing or similar sound that is there even with set off--you have a noise coming from a transformer in the standby power supply which is running all the time if the set is plugged in----Someone would have to open set and lis ...
Flat Panel Televisions
I have a lg 32lc5dc that powered off by itself and now when i unplug it or turn it on with the remote the remote no longer works and i have a snowy screen. It will not power off when i plug it back in it just comes right back on, every once in a while it will stay powered off when i plug it back in and the remote will turn it on but then the remote will not do anything else. i have changed the batteries and used the reset button on the back of the tv i dont know what else to do
Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this ic is got short or may be weak.so due to this when you start the TV the current passes fro ...
LG 32LC5DC 32 in. LCD HDTV
My panasonic 1080i will not turn on. Hit the power button and the light starts flashing green but nothing happens. After about 20 seconds or so the light goes back to red and flashes. Nothing works on the remote now. I bought this from Sams club as a close out as it was the last one (floor model) and did not have the manual. Have not seen any solutions to this problem as of yet. Please Help! W have not TV and are paying for service now.
Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television
Help unfreeze my Sharp Aquos TV.my tv keeps freezing. I can not turn it off, change the channel via remote or the tv itself. I unplug it and when I plug it back it in it is still frozen. What can I do?
Sharp Aquos LC-37D90U Television
My Sony KDL-52WL140 does not respond to any controls, not the remote, and not even the buttons on the tv itself. The only way you can turn it off is to unplug it, then, hours later, when you plug it back in, it is still stuck in the on position. It is tuned to a channel that gets only snow and static, and that's all we get. It was working fine, then started flipping in and out of various menus on it's own, as we watched, them tuned itself to the static channel and nothing will unstick it. The
Hello,The problem should be from the front panel control board. The board is defective or has disconnected from the inside. To\015\012 actually find out what's wrong, you need to disassemble the TV. But \015\012before th ...
Sony BRAVIA KDL-52W4100 52 in. LCD HDTV
I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit
Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ...
Mitsubishi Projection Televisions
Sharp Aquos LC-52D92U
TV won't show picture when turned on using remote.
But if you start from an unplugged state, plug it in and start it, it works.
The problem is when you turn it off using the remote, and you want to turn it back on again, it will only show you a black screen.
Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish ...
Sharp Flat Panel Televisions
TV turned on with the remote this am and then was unable to change channels, adjust volume or turn back off plus manual controls on the TV do not work either. Had to unplug to turn it off.
If you hold the ON/OFF button on the TV for about 10 seconds it turns on and to turn it back off you need to hold the ON/OFF button another 10 second and it will turn OFF; however when you let go of the ON/OFF buttons in a few seconds it will come back on.
Panasonic TH-C42HD18 42 in. Plasma TV
I purchased a Vizio 32' VA320M off of ebay and it arrived today, I hooked it up watched it for a couple hours this morning, played a little xbox on it and went to sleep. I woke up tonight and was watching TV for a hour or two and it started flashing the Vizio logo on my screen, the light on the bottom also started flashing on and off. when it happens you can not turn it off but instead have to unplug it and leave it unplugged for a few minutes. When you plug it back in and turn it on it works as
This tv have the main Tuner signal board have intermitten problems.Return this tv for a refund.Can't return it make a claim with Ebay,Pay PAL or ur credit card if pay by credit cards. ...
Vizio L32 32 in. LCD HDTV
WS-65807 quit working. We only had it connected to DirectTV via the DTV connection. Now when I turn it on I just get three color lines on the screen. When I push the reset button I get no change. When I adjust any of the top three adjusters at the front I do see a change to each line. If I turn one of these all the way left, the TV turns off. I have tried unplugging, waiting and then plugging back in, but never see any codes being flashed. What are my options?
If you move the convergence too far the set will shut down.Have you done the self check this model does have? ...
Mitsubishi WS-65807 65" Rear Projection Television
My Sharp Aquos LC-60LE847U lcd TV has some kind of controller issues. At times when we turn the set on using the remote, the indicator light will light but the TV never has sound or picture. It never "turns on". Then when you try to turn the power off, neither the remote nor the manual switch on the set does anything. If you fiddle with the power enough, the indicator light on the bottom bezel of the set will start flashing 3 blinks then one blink and keep repeating that. Unplugging the set
Sharp Aquos Flat Panel Televisions
Just like the owner of the Bush VCR, I have a Sony VCR which also keeps reverting back to 27th March at some point during the day. I keep resetting the date but it still reverts back to the BST change-over date. I've tried leaving the machine unplugged all day but the error still happened. Is there anything which I can do to stop this?
Many thanks, Sarah
Hello\015\012Waht is the model number of your Sony VCR? Inform me about it by Fixya. OK. ...
Flat Panel Televisions
The picture flashed green to black several times and the image went askew. Then everything went black and stayed that way. Sound remained on. After a few minutes, I tried to turn the unit back on and it did the white up and down lights ending with the two top lights on (now red). I have changed bulbs twice before when this happened and that fixed it. This time it didn't. One new thing that happens now (I know this is weird) is that when I turn it on the set chirps in the vicinity of the bu
Hi lc99527,\015\012\015\012This is an indication of faulty ballast board and or its power supply(gone to out-of-regulation) and once sense by the feedback circuitry it will automatically shuts off the power supply. First check for bad solder jo ...
LG 62SX4D 62" Television
TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance
Try to enter auto scan.. ...
Flat Panel Televisions