Having problems with your Flat Panel Televisions ?

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.



Answers :

It have short in some board have to checked by some professional.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast enough with turning the system on, you will get a picture for about 2 - 3 seconds, then the screen goes black. The power indicator light will go from blue to blinking red. Thank you for the assist.


It have short in some board have to checked by some professional. ... Hitachi Flat Panel Televisions

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

Goes black Turn on the tv, light changes from red to blue. Get the Curtis logo screen, then the tv goes black. The indicator light stays blue but nothing happens. Is this fixable?


... Curtis LCD2425A TV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

The blue on light flashes on my Pioneer PRO-930HD Media Receiver. The Plasma Dispaly power on indicator (blue) illuminates for a minutes or so then goes out and the red stby light comes on. I have no picture and no sound. Thank You for any help


... Pioneer PRO-930HD 43 in. Plasma Television

Hello, I have a Toshiba 57H84R rear projection tv that has developed a problem. Occasionally the screen would turn bright blue for a couple of seconds and then go blank (dark screen, like it had shut off). The red power button would go from a steady red light to blinking continuously and would have to be unplugged, then plugged back in to get it to come on again. One time it did this, there was a bright blue circle in the center of the screen and now there is a permanent yellow spot in the cente


I am 100% sure that this is not an issue with the CRT board(the tiny board attached behind the CRT's in this case the blue CRT). The problem is usually caused due to failure of high value resistors 500K-ohm or higher. Do you have an ohom-meter and kn ... Toshiba 57H84 57" Rear Projection HDTV-Ready Television

Hi there, my sony grand wega kdf60wf655 had stopped working and was flashing 5 red lights. I tested the voltage from the power board to the lamp ballast board and got a 272v dc. Just replaced the lamp ballast board and now get blinking lamp indicator. Tried a new spare lamp that i had in reserve and still flashing red lamp indicator every 1 second. Any ideas? thanksp i


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??


... Sylvania LC370SL8 37 in. LCD Television

I have a Sony Wega KDF-E55A20 rear projection LCD TV. The screen stays black when pressing the Power On button. When the Power on button is pressed, a GREEN blinking light (5th light in a row of 5) comes on and blinks about 58 times, along with an intermittent "popping static" noise. It then goes to a STEADY RED accompanied by the 2nd light in the row of 5, BLINKING RED. It continues like this until I unplug the power cord. It will do the same thing if I plug it back in an press the Power On but


It sounds that the SCL ' SDA signal path has some short. You must have thorough knowledge in electronics to follow. Checking I2C bus signals is a skilled work. If you wish to get more details, ... Sony KDF-E55A20

I have a HLT6187SAXXAA when I turn it on it does its little tune the n the fans come on for about 5 secs the reboots, it does this 3 times then it goes to all 3 lights blinking, my modle has no lamp but it has 3 leds, red , green and blue. I tested the voltages from the power board the powers the leds and all the voltages were fine but no leds. i tested a 3 leds with a 9 volt battery and they all power up so I replaced the led driver boarn with a new one and now it does the same thing what else


... Samsung HCM4215W 42" Rear Projection Television

Picture goes off. Power light blinks on and off. Unplug power for a few minutes, plug back in and you get a good picture for about 30 seconds to a minute. after picture goes off again, you have to unplug the TV to get the power light to stop blinking.


Hello, this is Joseph, here in Phoenix AZ,I can tell all of you how to repair the constant blinking light, on any TV that has this problem,down to the board that is causing the problem and the parts. One thing, the lamp will never c ... Panasonic PT-47WX49 47" Rear Projection Television

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

Tv will turn off then back on by itself. Power indicator light goes from blue to red then back to blue.


I beleive this is a firmware problem. ... LG 47LG50 47 in. LCD HDTV

Trutech plv16320vm tv/monitor, will not come on,when you plug it in you get a red stand by light ,when you press the power on button. it goes off and nothing happens. or after u plug it in and u get red stand by light just wait 2-3 mins and it goes off.. no power. only 1 or 2 years old please help


Are you still having problems with this?Please let me know.Thank You very much!\015\012 Tyler ... TruTech PLV16320 Television

I have a pioneer elite television. The red standby light is on, everytime I push power button it goes off. Cant get the blue light on for the tv to work. Think its stuck on standby mode. tried unplugging but did nothing.


In most cases the standby light might blink with different rapidity to indicate a fault relevant to the processor. It is possible that most of these indicate that there are errors in the processing section . Since there is a possible short o ... Flat Panel Televisions

TV WILL NOT POWER UP. IF UNPLUGED FOR 30 SECONDS IT WILL TURN ON FROM THE SIDE BUTTON ONLY, NOT THE REMOTE. BLUE LIGHT GOES AWAY AND A RED LIGHT BLINKS 6 TIMES


The most common failure on this set to cause that symptom is the power supply. There are capacitors that fail and you can usually see most of the bad parts just by looking at them. If this is the case the best way to repair the problem is to rebuild ... Philips 50PFP5332D 50 in. Plasma Television

My lg tv (42LG3000) switches itself on when turn the power on at the wall. When turn off at remote it goes off then 10 seconds later turns itself back on again. Red light on tv flashes intermittently but dont get blue light anymore.


... Flat Panel Televisions

I have a Dynex 19-10A and it powers up and indicates Please wait and then it goes blank, nothing. The blue power light is on. Is this worth getting it fixed, it's now just outside the warranty, not even two years old.


... Dynex DX-LDVD19-10A LCD TV

I press power blue light comes on for a second then I get a red blinking light on my television.


... Philips 42FD9935/17 42 in. Plasma Television

Hi, i have a Sharp LC65D90U lcd tv and when i turn it on the backlights come on but not picture, i can get into the service menu screen and do stuff but otherwise if i just power up only the backlights come on with the blue light on but i cannot turn it off with the remote or buttons on the tv until it goes on for about 45 secs and then turns itself off and comes on for about 30 secs then and then turns off and stays off. Now in this off mode the opc light blinks once every 2 secs and the sta


Hi Starcruzer,\015\012\015\012You didn't confirmed yet the output voltages of the power supply, If so, you must check this. Your output voltage may have an unregulated supply which caused by bad filter capacitor in that area and trigger an erro ... Flat Panel Televisions

My television will not come on. The blue light comes on indicating that I pressed the power button to turn it on and then after several minutes of a blank screen it turns itself off and goes back to the red light.


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

My panasonic flat panel tv with model no. TH-L32c20x has a power problem.. i push the manual button on tv side,the red light is on..then second is the remote power,the green light come and blinking 20 times,then turn to red light blinking slowly, the power not goes in, i unplug and plug again,try the same way its not working..


... Panasonic Flat Panel Televisions

I have a sony kdf 50e-2000 the green light goes on then it goes to thr red blinking lamp light. I have no sound or picture. If I replace the lamp light will I get sound and a picture again?


Hi,Yes, if you have not replaced the lamp since you purchased this TV.Lamps usually last about 6000 hours.I've seen lamps last much longer than 6000Hrs, it all depends on the usage.Remove the lamp from the TV and do a visual inspectio ... Sony KDF-50E2000 50" HDTV

Replaced bulb in kdf-50e2000- when powered on green light flash 3 times & fan engages, 2 seconds later fan quits and i get a 3 red light blinks


Impossible to actually see if lever is Fully engaged---with door off try to engage with a match stick or something not metal--see if set comes on that way. ... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3384 seconds