Having problems with your Projection Televisions ?

Hi, I have a 60VS810 60inch LCD projection and the blue power light flashes but no picture comes on...i just got it for free so i dont know how it worked before..yesterday i did get a blury pic on the screen that kept moving so i couldnt read the menu bar but u can slightly see the menu options..only the blue power light flashes nothing else..what could this be..the lamp looks good and the bulb is fine..what else is there so i dont have to pay hundreds to fix it



Answers :

Flashes of blue light are fault indications. From the number of flashes occurs at one time switch on, you can get an idea about the faulty section circuit board inside. If you wish to get details about these blinks, check this link.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi, I have a 60VS810 60inch LCD projection and the blue power light flashes but no picture comes on...i just got it for free so i dont know how it worked before..yesterday i did get a blury pic on the screen that kept moving so i couldnt read the menu bar but u can slightly see the menu options..only the blue power light flashes nothing else..what could this be..the lamp looks good and the bulb is fine..what else is there so i dont have to pay hundreds to fix it


Flashes of blue light are fault indications. From the number of flashes occurs at one time switch on, you can get an idea about the faulty section circuit board inside. If you wish to get details about these blinks, ... Hitachi 60VS810 60" Rear Projection HDTV-Ready Television

I have a samsung syncmaster 320p and my screen would just flash and flash with the blue light you could change it to component and all that except it would still just flash. now it will not even turn on it does not have the power light even come on when we plug it in. if you could help me i would appreciate it thanks.


... Flat Panel Televisions

PHILIPS Software /Hardware problem 32pfl5522d blue screen nothing works Checked the basics holding menu , Connecting av source i get nothing Just blue screen, psu looks ok. I also noticed the blue led flashes when pressing menue or program keys Only buttons what work are power and volume keys Any knowlege of this uncommon problem would be ace :D thanks !!


... Philips Flat Panel Televisions

Olevia 747i 47 inch LCD TV does not power up. Blue light "power up" light stays on, will flash off and back on when I try to power the TV up. Nothing appears on the screen during the process--it appears to be dead. The TV is 2.5 years old.


Please see comments area on this email for more solutions \012\012TV needs servicing\012\012\012CERTIFIED TV EXPERT HERE, follow this information I provided 3 long solutions to this issue/s Solution 1 Before we start taking things apart, lets t ... Flat Panel Televisions

Screen comes on for 20 to 30 seconds then goes black. the power light is blue (on). when i hold the power button on tv it comes on again then goes off after 20 to 30 seconds. i have tried all the differant inputs, except for the pc input and i get the same results. i opened up the back of the set to see if it could be a bad cap but everything looks good,no burnt smell, nothing melted or poped, could this be a bad input board? This tv is not used much (less than 1000 hrs) it is clean and looks ju


... RCA 32la30rq 32 Tv Black 720p Lcd - - RCA

My Philips 26PFL5302D/37 will being working great then it will go black. For a few minutes it allows you to go to the menu but it will not allow you to turn the channel. Then it eventually just be black, blue power light is still on, and nothing will happen. I trying turning the tv off and unplugging it but I get the same power on but nothing on the screen. I wait half an hour or so and it turns on and works again. What do I do to fix this???


Hi,what makes the TV malfunctioning this way is because the TV is overheating....Overheating might be from capacitors or IC inside the TV set...To fix it, you will need to check the capacitors or IC if the dry joint soldering of th ... Flat Panel Televisions

Light is orange in bottom corner and when i press menu it flashed blue but nothing on screen


... Philips BDL4231C LCD TV

Set up the tv and there is a blue light flashing in the bottom left corner. i push the power button on the tv and nothing happens what should i do


That can be an indication of a bad power board or a bad main board.There are several ways to narrow it down, but perhaps the easiest is to test all power board output voltages with a meter.You don't even specify the model of the TV he ... Element Electronics Flat Panel Televisions

My lg tv (42LG3000) switches itself on when turn the power on at the wall. When turn off at remote it goes off then 10 seconds later turns itself back on again. Red light on tv flashes intermittently but dont get blue light anymore.


... Flat Panel Televisions

Hi, i have a 42inch Dynex Flat Screen, the issue i have is that when i plug in my Tv, the little red indicator comes on showing that its ready to be powered up, but when i push the Power button the Blue indicator comes on but there is no picture and no sound, the screen does not light up and nothing is displayed when i press the volume, channel and menu buttons, how can i figure out what is wrong? I hope its just replacing a blown fuse or something, Can u help?


I will give you some general info and some ideas--let me know what you find or if you have questions.I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby chec ... Flat Panel Televisions

I have a JVC-HD projection TV model 56G786 and all of a sudden it will not power on. When you try to turn it on the blue light on the power button goes on but after a few seconds it starts flashing and the TV will not start. What could it be? Did something burn out?


Hi,The JVC 56G786 users manual will not give you a clear or specific answer about confirming bulb failure with the LED lamp or power indicato ... JVC HD-56G786 56" Rear Projection HDTV

The lamp was bad, replaced it. tv worked fine for one night, tried to turn tv on this morning and nothing.......single yellow light flashes 15 times beside blue power light. What does this mean?


Please include make and model of your set. This will help diagnose your unit. ... Flat Panel Televisions

I have a Polaroid 2611-TLXB TV that was manufactured in September 2007 and recently, I turned it on one night and there was no screen at all. The blue power light was on though and I could turn it on and off with the remote but still no screen. I tried unplugging it and plugging it back in but nothing changed. I checked the back and there is a red blinking light.


... Polaroid 2611-TLXB TV

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


Warranty is usually 1 year parts and labor. Contact mfc for warranty service. likely main board. ... Flat Panel Televisions

X322BV-HD*WXC100 Problem: TV will not power up. Red indicator light is evident and turns blue when you use the power button on the remote or the power button on the TV. However nothing else happens. The screen does not light up nor can you turn it back off with the remote or TV button. I tried on several occasions to remove the power cord and plug it back in again with no success. The red indicator light comes back on and turns blue when I use the power button on the remote or the power button


... Flat Panel Televisions

There was a power outage in the building and now the tv will not come on. The red power light is flashing, that is the only response I get, no picture, no green power light, just flashing red power light, what could be the problem?


You will most likely need a tech to repair the power supply.\012\012You could contact a BIG name repair group, But if you can find a guy like me,\012\012you could get it repaired for the less than $10 costing part it needs and ... Toshiba 50HX81 50" Rear Projection Television

HD52G887 BPA. We turn the power on but it keeps turning itself off. No picture, no nothing. Just the red and blue lights flashing on the front.


Aseek02,\012\012If you have never changed the lamp I would do that first. I have a tip at http://www.fixya.com/support/r4168009-change_lamp_ ... JVC HD52G887 52" Television

I have a Mitsubishi WD-73737 and when I turn on the tv the power light flashes very fast for a minute then stays a steady green and the screen is a solid blue. There is no sound as well. I have tried the system reset and it didn't do anything. I was given this tv, so I don't know how old it is. The tv will occasionally work but that is very random. The only item I have plugged in is an Xbox 360 with the component cables. The menu button does work so I know the screen still works.


Do you have the input turned on that you use the xbox for? Try different inputs as well. If you are getting the menu to come up, the blue screen is telling you that you don't have a signal being run through that particular input. ... Projection Televisions

Turns blue led light on ...quick screen flash then nothing...once it was so dim i could barely see anthing... like95% dark..i guess..also...can i take apart without breaking seal or something somewhere by chance


Almost certain to be the screen inverter pcb locking up and going into protect mode Flea bay has lots of them relatively cheap and it's a straight plug in swap for the old one. ... LG M2362D 23 in. LCD TV

I somehow locked the keys in the option menu, now I can't get the screen on at all. Light is red, when pressing the power button it becomes blue for a few seconds, then back to red, with nothing e


What is the brand name to your TV? ... Standard (CRT) Televisions

I have an Audiovox FPE3706 Lcd TV. When you power the TV on most of the time it goes to a screen that says "Audiovox" and will do nothing else. Sometimes the screen just stays black even though the light on the bottom has gone from red to blue. I have the back off the TV now and I dont see any obvious damage. How do I diagnose and repair this thing?


... Audiovox FPE3706 37 in. HDTV LCD Television

Toshiba 40RL953 smart tv I tried loading the Wi Fi function through a menu it stated loading then went back to the TV program and I couldn't get it do do anything I switched it of and on the remote then worked ok I could change channels and access functions, I then tried to use my xbox which is connected via hdmi and its now locked up the power lights on but nothing works.


... Standard (CRT) Televisions

JVC LT-42TG30J Doesn't start, blue light flashes


... Flat Panel Televisions

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

I have 50 inches plasma Hitachi TV (ALiS 1080HD). As the TV was on, the screen stopped showing (no picture) and no sound could be listened as well, without any reason. The power light started flashing (on and off) so I turned the TV off from the power supply (as the remote control was not responding). Few seconds later when I turned the power supply back on for a moment I heard a sound (making me believe that the problem was fixed) but once again the power light started flashing with the same en


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1441 seconds