Having problems with your Projection Televisions ?

I have a Hitachi 60-inch Projection Color TV Model 60FX32B. Love this TV! It started showing red ghosting and sometimes the picture is better than other times. We calibrated the color but the red line will not move all the way over to the center of the other lines is off by a hair. How do we fix this problem.

Answers :

We had it fixed by an expert, replaced two STK 4274 Resistors, only cost $300.00, works great now.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Hitachi 60-inch Projection Color TV Model 60FX32B. Love this TV! It started showing red ghosting and sometimes the picture is better than other times. We calibrated the color but the red line will not move all the way over to the center of the other lines is off by a hair. How do we fix this problem.

We had it fixed by an expert, replaced two STK 4274 Resistors, only cost $300.00, works great now. ... Hitachi 60FX32B 60" Rear Projection Television

I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver

The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ... Samsung LN40B530 40 in. LCD HDTV

I cant line the red and green crosses up left and right but i can move them up and down. I have two pics in diferent colors

The tv have a convergence problems,it is dead.Tv have colors lines like R,G,B mis alignments,have colors pictures shadows or 3D pictures look alike?Yes,than the tv convergence board it is dead.The tv convergence board must require replacing 2 STK con ... Philips Magnavox 51MP392H Rear Projection Television

I can't adjust my green on the converge menu. The arrow blinks but the line does not move. I can go on anadjust the blue and the red but I still don't have the bedt of color and I think it's because the green is not set up correctly even doing an AUTO CONVERGE.

Hi,\015\012\015\012If the green color can't be align anymore in the convergence alignment through the menu, this is an indication of faulty convergence board inside. Your unit used STK-392-110 as convergence chip(IC) mounted in the heat sink. R ... Panasonic PT-47X54 47" Rear Projection HDTV-Ready Television

The red will not align up in our Hitachi model 51UWX20B with magic focus done automatiaclly or manually. When the red first started to go out of line we did magic focus and it worked. then after turning the tv off it went out of line again and will not go back. Once while messing the the pip buttons we got it to align somehow, but after about 20 minutes of watching tv the red moved again. How can we fix this?

You have a bad convergence board. You will have to remove the convergence board. If I remember,this board also has the flyback transformer mounted on the same board. It is quite complicated to pull this board. You will need to use different colored p ... Hitachi 51UWX20B 51" Rear Projection Television

Hi I just got a tv from my friend and when I plug in that color was red mostly red and I try to fix to move the color control on the back but dosent work so now is so blue and I dont know how to put normal colors can any one can help me?

... Philips 55PW9363 55" Rear Projection HDTV-Ready Television

Try to adjust the green blue red lines .the green moves up and down but the red blue just moves side to side not up or down .replace the blue crt tube and when I went to adjust the i hear a pop .I got the repair manual and the tv did not have that maget x looking thing rings that slides on the tube that gose to the top on the blue tube ,not the thing thats wrap in copper.

... Samsung HC-P4241W 42" Rear Projection HDTV-Ready Television

My Samsung hdtv model LN46B650 has a hazy screen with vertical thin lines running from top to bottom. These thin colored lines move and change colors. Some get wider then thinner. I have tried replacing the T-con board but that didn't solve the problem. Any ideas what is causing the problem. Thanks.

You should download the PDF and learn what the T-CON/LCD panel failure can do to what you see on the screen.\012\012 ... Samsung Flat Panel Televisions

Panasonic TC-P54G25 has a red horizontal line in middle of screen and THX mode cause multi-colored horizontal band at bottom of screen. I've tried resetting to factory defaults and removing all input. The red dashed line is still there and choosing THX mode causes a problem.

... Panasonic TCP54G25 54 in HDTVReady Plasma TV

Horizontal color lines moving up on screen

... Vizio VW37L 37 in. LCD HDTV

I have a Hitachi 43FWX20B. I can see the red is not lined up with the blue and green on the far left side of the screen. Only the red and only on the far left side of the screen. Blue and Green are OK. I tried the Magic Focus, I get a error code 5. I tried manual Focus of the red on the far left of the screen. I can ont move the red. Do I need to replace the Convergence Chips? Or could this be a bad resistor? If so, witch one. Please Help..............

Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>Projection TV sets have ... Philips Magnavox 9P6034C 60" Rear Projection Television

I have a 2002 Sony KP-57WS500 that occasionly (randomly?) flashes red lines and then goes to a full screen red while giving an electrical "cracking" sound before shutting down. Once shut down, the red power light blinks 8 times in a cycle. Any thoughts? I have unplugged and moved the plug to a different outlet.

Seems like your RED CRT is shorting out or failing. Do you notice any other colors besides just red having problems? The blinking of the red light eight times is a High voltage error. It could be your D board but I'm thinking it is more likely the ... Sony KP-57WS500 57" Rear Projection Television

Thin red line across screen two inches for the top. Picture above line is good, picture below line has no color and double image.

Bad panel ... Vizio L32 32 in. LCD HDTV

Green line on left side of an image and a red line on right. Such as around a face. Colors just don't line up and picture is very fuzzy. Had another old rear projection and it had a way to align it. Can not find the way on this tv.

Your other model was more than likely a CRT projector where you coulod manually align the Red/Green/Blue guns. The one you have now is more than likely an LCD projector which can't be readily aligned. Sounds like the panel is failing. ... Zenith R57W46 57" Rear Projection Television

Television picture has no picture it just displays a multi colored set of lines almost like a plaidlook u can kind of makeout nfaces like they are in the background before this it would get a six inch black line that would move from left to about the center and back

HelloThe T'Con board {Timing Control Board] has damaged. It should be repalced. ... Sony BRAVIA KDL-46W3000 Television

I have 2010 Panasonic Plasma TV that developed horizontal red and green scrolling lines. Lines move from top to bottom. I have unplugged my tv from evrything except the outlet and they still appear. i changed to a different outlet on another breaker and the same problem. Any ideas?

... Panasonic TC-P46G25 Flat Screen Plasma Television

I had my Emerson Tv since depraved of last year. I had moved and went to plug it in and it's flashing different colors. The colors are:red, green, blue, gray

With the original remote. Press cursor button up followed by cursor down. Power off TV. This should return your TV back. ... Emerson Flat Panel Televisions

Broke mpthe mirror in my WS-55313 Mitsubishi projection tv while moving it. Just wondering how much it will cost to get a new one. Is less than 100 dollars reasonable? We dropped it while moving it and the mirror broke. We turned it on and the middle of the screen was dark and going out towards the edges it was red and green, then it was normal colored. I am assuming all that needs to be replaced is the mirror

A few notes:First if the mirror which hangs at a angle facing the screens comes apart it can come forward and smash the inner screen.The best way to proceed is remove the entire front screen frame:remove speaker grill on front ... Mitsubishi WS-55313 55" Rear Projection HDTV-Ready Television

The color is red bue and the left side has a nice part of the picture that is blury with lines..the right side is fine if the color was good...how can i fix this

... Panasonic TH-37PD25U/P 37 in. EDTV-Ready Plasma Television

Most of my red crosses will line up how do i get all of them to line up. i can only move them so much

If red (or blue) will not line up in some part of the screen:1. damaged resistor to one of the convergence chips2. bad convergence chip3. Problem in the DCU---digital convergence (memory) module.If the crosses will not ... Hitachi 60DX10B 60" Rear Projection Television

My RCA P52937SG projection tv. Picture distorted. I beleive it has to do with the green circuit / projector. Everything needs to be aligned to green. Green projector is on, but, in alignment screen I get no crosshairs to align it. Blue and Red the crosshairs show up. Screen is like convexed, good in middle, outside alignment sguares and color lines do not line up.

The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?The tv convergence board is dead.The tv convergence board must have replace the 2 STK conve ... RCA R52WH73 Projection Television

MY SONY TV LCD MODEL KF-50WE620 screen went blank. When I turn on the green light it blinks on 40-46 times every second, then turn to red color to Stand mode and blinks for 160 times, then move to power off (red light). This TV has been OK for awhile until TELUS OPTIK HDTV (box) device was connected, shortly after 2 days I heard a loud single sound like a sound of a smoke alarm, just once, "squeeek". Then the TV Screen went blank. The other device from TELUS is still on.

There is no reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective. \015\012\015\012 Might check fuse, R607, Q601, IC601, R612 and VDR601 (should show open).\015\012\015\012 ... Flat Panel Televisions

I changed my two IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of screen. Manual convergence show a white horizontal and vertical lines with focal right horizontal end with red line no aligned, but if I fix this side, the left side is disaligned. So, I am lost. What can I do?, what is wrong?

Ur tv still have dead resistors parts,test all 12 resistors parts around the 2 STK convergence ICS and changes some more dead resistors parts or changes all 12 resistors parts for sure.If tv still have the same problems after tested and replaces more ... Hitachi 43FDX01B TV

There are 3 colored lines, a blue, green and red curved across the screen. The color is funny and the picture is curved

Convergence power supply board. You can get a replacement board from www.tvrepairworld.com ... RCA D52W20 52" Rear Projection HDTV-Ready Television

We had a small line going up and down the tv. our old samsung same model fell and broke during our move. we decided to open the tv and swap boards. now the tv turns on then off twice,the red light stays solid red. we put the original boards back in and we still get the same problem. all the connections seem to be on correct, what the heck did we do wrong?

... Samsung PN50C430 50Inch 720p Plasma HDTV (Black) 50 in TV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0797 seconds