Having problems with your Projection Televisions ?

Well here is the problem I have Hitachi rear projection TV model # 50EX12BA V5K02256 the TV turns on and changes channels. When I go to the menu items (to program the channels for example) via the remote. None of the menu options work. the remote works I can scroll to and select an option and press the enter button (as per the manual instructions) but nothing happens. Is there a way to do a hard reset to return the tv back to factory settings?



Answers :

Looking for a RF in cable for model 50EX12BA
The only Hard Reset is - unplug the set for 20 minutes and then plug it back in and turn it on.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Well here is the problem I have Hitachi rear projection TV model # 50EX12BA V5K02256 the TV turns on and changes channels. When I go to the menu items (to program the channels for example) via the remote. None of the menu options work. the remote works I can scroll to and select an option and press the enter button (as per the manual instructions) but nothing happens. Is there a way to do a hard reset to return the tv back to factory settings?


Looking for a RF in cable for model 50EX12BA ... Hitachi 57F500 57" Rear Projection HDTV-Ready Television

I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its


Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ... LG 42PG60 42 in. HD-Ready Plasma TV

Not all of the buttons on my remote for my Celestial G6C52H-C1 work and I have accidently selected panal lock on the tv. Now I can't use the buttons on my tv and the broken buttons on my remote wont allow me to scroll down the menu to unlock it. Please help because I can only watch a few channels and that is it. I can't even change volume or put it on av to watch a DVD. The enter button on the remote doesn't work either. Thank you. Liz.


... Flat Panel Televisions

I have lost my remote for my JVC LT-32DA30J i need to retune my tv by using the set top buttons i can enter the menu but cant confirm my selection in the menu? is there are a confirm button available?? ive tried universal remotes(sky and an 8 in 1)' but same problem??? please help : /


... Flat Panel Televisions

I purchased a Toshiba LCD TV/DVD 22 DV500B for our great grand daughter in setting it up, I went through the auto set up, then it asked annolog yes or no I pressed yes thinking I would get a few extra annolog channels for her, all I ended up with was 4 good annolog channels and one not so good. To retune the manual states. Press MENU on the remote. Select SETUP and then INSTALLATION. I press menu but only get picture/sound quality changes. 6 different areas of change but no SETUP


Hey, i had this exact problem, made the same mistake with selecting yes. Worked out the solution is to press the source button, then scroll down one to DTV/USB, and this will be the free view. Hope it helps, Ben ... Toshiba Flat Panel Televisions

I have a 19 inch toshiba tv 19A21 but no remote for it. I'm trying to hook up a dvd player to it to play through the tv. All the cables are set up correctly, but I can't find the input channel on the tv that will let me play it. I read the manual for this tv and it says you use the remote to access the input screen, but I do not have a remote. Is there a way to do it through the buttons on the tv? Pressing the volume buttons at the same time got me to a menu screen but I didn't see an optio


Most analog tv,u just reqiure pushing the tv manual button channel up a few times,tv will go into video modes like 1 or 2 for play video devices.If this doen't work,try website like Remotes.com to buy an original remote. ... Toshiba 19A21 19" TV

TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance


Try to enter auto scan.. ... Flat Panel Televisions

I have a vizio m 470nv when I hit the menu button, it locks up the remote and it will not do anything. the only way to get remote to work is to unplug set, wait a bit, and plug in, then I get back remote function.power, volume, channel select only.


... Flat Panel Televisions

There is no enter button on my luxor tv..... i simeltaniously have to press vol +/- to get the menu up, then when i get to channel set up, theres nothing i can press to select?


... Luxor Flat Panel Televisions

Hello, I have an old Sony Trinitron KV25XS DC. It is without remoter now and I don't know how to tune the channels. I was able to scan the bandwidth and select the channel I wanted, I can even change the number of the channel on which I want it to be but then I don't know how to set it. How can I set a channel on a specific number?? What is the button for this? A combination of buttons? Thanks. Fra


... Flat Panel Televisions

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if


... Flat Panel Televisions

The remote doesnt work with the tv at all. and when i try to change the channel manually with the button it says no input availiable. but the volume button works just the channel button that doesnt. I trried hitting menu on the remote nothing works


UNPLUG THE SET FOR A WHILE AND PLUG IT BACK IN TO SEE IF IT WILL REBOOT-sounds like a microprocessor problem and could have been caused by a power outage etc. ... Sharp Aquos LC-42D62U 42 in. LCD HDTV

On Mitsubishi DLP TV MITS-WD-52631 the buttons on the front panel of the TV will not work and the functions on the remote will not work either - whenever you push a button on the remote, the buttons on the middle part of the remote flash red, and nothing happens with the TV - cannot adjust volume, change the channel, or enter the set up or format menus.


Replace the front key board panel. You should be able to get one at www.tvrepairworld.com just hit the contact button on the right and enter the model number and symptom they ... Mitsubishi WD-62525 62" Rear Projection HDTV

I have prchased a Proline DFV19U digital set top box and follwed the instructions to set up What I find is that if I press the channel up button it changes the TV channel from AV1 and I have to reset it.I have been told the digital box frequency is to close to the TV remote frequency. If this is the case how to do I fix it Regards, Harry Risk


Unfortunately, if you have two unitswhich use similar remote control signals then there is not a lot you can do except prevent one of the units from receiving signals (or replace one of the units with a different make). If you use the TV remote contr ... Flat Panel Televisions

Need to adjust horizontal position of picture, black bar on left side, lost picture on right side found a procedure to open menu by holding OK button on TV and remote simultaneously "for several minutes". One problem is the TV does not have a button labeled 'OK'. I tried it using 'Enter' and again using 'Menu', neither worked. Note, service manuals are suppposed to be available on the LG site, but I could not find them.


... LG 32LH30 32 in. LCD HDTV

The past week the memory stick menu flickers or stays on for secs and now is on one half the time. If I change a channel or press the memory stick button, it will correct itself for a while and then return to the menu once again. I do not have a reset button on my remote, but I have unplugged the set overnight without benefit. I have never used a memory stick either. Any ideas?


... Sony FD Trinitron KD-36XS955 36" TV

My TV, AKURA AODV211T-S, the on screen display is not showing ? Unable to see volume level, channel numbers, menu display ? There is no info in the Manual Instructions book.


The display driver section circuit should be troubleshooted. Contact any experienced service technician. It is a skilled work; not a user repairable one. ... Audiovox Standard (CRT) Televisions

I have an NEC NLT-40HDB2 with some odd issues, the input (changing to hdmi/ avi) and channel up buttons don't work even when using a logitech universal remote, the buttons on the side of the set d


... NEC Flat Panel Televisions

I have a small Sharp TV-VCR combo model # 13VT-L200. It only has a multi brand remote and so far works with the TV fine. the menu comes up with the remote but the remote and the TV control buttons don't move the selection choice at all. So no adjustments at all. I have viewed other postings that are similar on manual download and fix-it websites that remain unanswered. Do you know a way to fix this problem I am having? Thank you, Tom Sullivan


Possible that the remote is faulty , sometimes the carbon tracks would have worn off, you will need a repair kit to write the tracks. Also to check the remote IC for all functions from the inputs. \012\012 ... Sharp 13VT-L200 13 in. Combo

My name is Rich. I purchased the vizio m220nv . Just got the tv today. went thru set up and searched for channels no problem. When I press the menu button on the remote nothing happens. when I press the VIA button the apps don't show up. I even thought it might be a weak internet signal and ran an ethernet cable directly to the tv.


... Vizio M220NV 22 in. LCD TV

Menu remote It will not let me out of the Select TV Mode Setting and I do not have a remote for it. It will not let me do it from the buttons on the TV either.


If there is no 'Menu' button at the front panel of the TV, it is not possible to select its inputs without its remote control. ... Apex Digital LD4086 LCD TV

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re


... Flat Panel Televisions

We have an AWA MHDV4203 television that our nieces were messing with and now it won't stay turned off unless we use the manual on off button on the television. If we turn it off via the remote it turns back on in about 5 seconds. Also the channel and show description stays on the screen everytime you change channels. I have tried restoring default settings and it hasn't fixed the problem?


... Flat Panel Televisions

My tv brand is Vivo I got it from Australia about a month ago. Its 50" Plasma tv with HD Tuner. The menu setting and the source selection menu keep popping up on the screen and then it just change to different channels by itself like someone is controlling the remote control. This has been happening for almost weeks now. I turned off the power and unplugged the tv from the power source for a day and turned it on again but it gets normal for about 10 minutes and then the problem starts to occur


... Philips 50PF7320A 50 in. Plasma HDTV

I have brightstar br100p remote & i connected my laptop with hdmi cable to my tv. But now i dnt know how can i select hdmi-1 on the tv as my remote doesn't have any menu or setting button. plzzzzz help me.


... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5163 seconds