Having problems with your Projection Televisions ?

No picture or sound with a red flashing power light. Have replaced the convergence IC's but no change (do not have the chirpint sound). Removed main power board & green LED does not light up


\015 No picture or sound with a red flashing power light. Have replaced the convergence IC's but no change (do not have the chirpint sound). Removed main power board & green LED does not light up. Does anyone know which components to test/replace to get this board back up & running? Thanks!\015

Answers :

On that model the conv IC is usually not the solution. I believe its the blown capacitor problem with is an easy fix. Check the site www.TvRepairKits.com for a repair kit.

Repair Help & Product Troubleshooting for Projection Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

No picture or sound with a red flashing power light. Have replaced the convergence IC's but no change (do not have the chirpint sound). Removed main power board & green LED does not light up


On that model the conv IC is usually not the solution. I believe its the blown capacitor problem with is an easy fix. Check the site www.TvRepairKits.com for a repair kit. ... Hitachi 53UWX10B 53" Rear Projection Television

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev


... Standard (CRT) Televisions

I got a Sony Bravia KDL-40WL135. Blank screen. There's two LED lights: red standby and green power light. When I turn on the TV, green led comes on, then after about 30 seconds red led blinks once, then green resumes. The green led stays solid. I think that's a SONY error code, I tried to look it up but can't find anything useful. I have replaced the power supply, AU board, backlight inverter, logical board, and the second power supply board. Any suggestions? I haven't checked the t-con bo


Http://www.smpcshop.com/KDL-40WL135-KDL-46WL135-p-8895.html\015\012\015\012\015\012\015\012Above is a link for a service manual.\015\012 ... Flat Panel Televisions

Recently my benq mp620p projector stop working. When I connect the power cord the power button lights up green and the power led orange as usually. When I push the power button, it starts to blink in green, the filter wheel starts to spin and the lamp starts to warm up with some light comming out. Few seconds after, the fans start, the power led becomes solid green and the lamps goes of. I can't do anything else since that other than unplug the power cord. No response to any button. Any help?


I'm assuming that you have checked the bulb and it appears ok. Either the inverter/ ballast board has a fault or , much more likely, the control board is no longer capable of finishing the loading of the firmware. This is usually caused by the failur ... Flat Panel Televisions

Hi, I bought a Vizio L32 HDTV10A that didn't power-up. There were charred components on the power board (an 8-pin IC with heatsink and 2 resistors). I replaced the power board, and the power LED then turned on (yellow) when power was applied. When the ON button is pressed, the power LED turns green for roughly 8 seconds and then the power LED turns yellow again. Nothing else happens. I checked many components (fuses, capacitor ESR, diodes, etc) on the main board and the master and slave inver


... Flat Panel Televisions

I have a samsung HP-T5054 plasma tv the tv powers up and the samsung tone is audable but i get no picture on the screen the screen is not broken the power light flashes 5 times then is steadily lit on the digital board in the back of the set led 2000 and 2001 stay lit led 2003 light for 2 seconds then goes out but led 2002 flashes every second I had a shop test my Y main and buffers with a set that they have and those parts test out I am a electronis tech with 12 years in the A/V repair field


... Samsung Flat Panel Televisions

Led24a45rq hi, i have this rca led24a45rq that won't power on redb led light constant on, i have 12v coming from power supply to the main signal board could it still be power supply problem or main signal board tell me what you think it could be. or could it also be the back light inverter


... RCA LED24A45RQ 24 Class LED HDTV - 1080p, 1920 x 1080, 16:9, 800:1 Dyn

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

Installed new ic's and resistors. When I turn the power on the projection bulbs do not light up. 3 of the 4 green led's light up and the 1 red one. The 1 upper right green led does not light up. What is going wrong?


If you bought a kit with instructions from sites like www.TvRepairKits.com go back to their site and email them for help. This may be a simple fix. If however you bought random ... Hitachi 51SWX20B 51" Rear Projection Television

I have a HLT6187SAXXAA when I turn it on it does its little tune the n the fans come on for about 5 secs the reboots, it does this 3 times then it goes to all 3 lights blinking, my modle has no lamp but it has 3 leds, red , green and blue. I tested the voltages from the power board the powers the leds and all the voltages were fine but no leds. i tested a 3 leds with a 9 volt battery and they all power up so I replaced the led driver boarn with a new one and now it does the same thing what else


... Samsung HCM4215W 42" Rear Projection Television

Sanyo dp50747 / no picture when power on, green led light +noise in spkrs, and power supply seems to click and click off?


... Sanyo DP50747 50 in. Plasma TV

Hitachi sp-43w/sp-43h. Power on, 1 red light & 2 of the 3 green LED lights flashing. But no picture & no sound. Help?!


... Hitachi Projection Televisions

Dear Fixya,I have a problem with my Sony Bravia Kdl-32u2000 LCD type television I switched on and the red led light flashes continually with no sequence and both red flashing power led and green led constantly are on at both the same time with no other life except a quiet high pitch noise from the power board area can anyone help me solve this problem.ThanksBrian


... Flat Panel Televisions

Tda9380ps /n3/3/1664 using in sharp tv power supply ok ,but no EHT ,the power LED are glowing red light press program key to change green light to return in few miniutes to standby in red light position ,please to help of rectivied this problem and send circuit diagram and IC pin configaration thanking you sir


Tda9380ps /n3/3/1664 using in sharp tv power supply ok ,but no EHT ,the power LED are glowing red light press program key to change green light to return in few miniutes to standby in red light position ,please to help of rectivied this problem and s ... Flat Panel Televisions

KLD60EX700 Sony Bravia my screen is black and the green and yellow lights are flashing at the same time. Any ideas on how to fix this? I've replace the power board and the main board because it was flashing red (3 flashes) witch turns out it was the main board not the power supply.


... Flat Panel Televisions

Hello, i have a sanyo dp 19648 that was working perfectly when last used, i have been away on a trip & turned all electric power right off from the mains & when i got back, the tv will not come on now, the green light just flashes a few times then goes off, i can do this 3 or 4 times then have to unplug it & plug it back in before the green light will flash again, this is just repeatedly all it does, have any ideas please


Power supply in set has a standby the runs 7/24 (all sets do and computers also) and the loss of power when restored may have damaged something there---a fuse is possible and should be looked at first---the Standby provides voltage for the remote to ... Sanyo Flat Panel Televisions

Toshiba Regza 47 in LCD sound no pic,logo illuminates, when powering on green led is steady then switches to yellow led blinking light then powers off


I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all thes ... Toshiba Flat Panel Televisions

I have A Hitachi 42In Plasma Tv model # 42HDT79 The blue light is blinking continuously and in the back of the set on 5 error code lights the third is lit green the 4th is lit orange screen is lit but no video or audio. Ithink it is probably the main board. I would just like to hear some iodeas or opinions. Also, none of the buttons on the side of the Tv work.The 2nd error code light will occasionally come on and when it comes on the blue power light will stop flashing but then it goes right b


Main board is possible but power supply board should first be tested. ... Hitachi 42HDT79 42 in. Plasma Television

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

I have Samsung UN46B8000XFXZA LED TV. After power surge it will not come on. Plugging it in causes the blue power up light to come on for one second. The relay on the power supply (BN44-00270A) begins to click. The screen does not come on. All appears dead except for the clicking of the relay on the PS board ever few seconds.rnIf I unplug the connector from the power supply to the Main Unit Board (BN94-02661E) and apply 110v, the screen backlight comes on and there is no relay clicking. (


Yes based on your testing it appears that the power supply is at fault solely and you can opt to attempt a repair or replace it altogether. Unfortunately you will not be certain that the main board does not also need to be replaced until you have rep ... Samsung Flat Panel Televisions

We had a power outage, a transformer blew across the street last nite in the storm. Our TV was on a surge protector. However now it wont come back on, It shows green light as power is on, but you cant turn it off at power switch or turn it on there. You can shut down the main power switch, but when you turn it back it goes immediately from amber to gree lite but nothing comes on TV. Is there a reset button?


Hi coliver681,\015\012\015\012Do you check the output voltage of your surge protector, if not check it. If you haven't a multimeter, try to plug the unit directly to working wall outlet. Before you plug it to the wall outlet, power on the main ... Flat Panel Televisions

I have a Hitachi plasma model# 55hdt79 that went black out. No display at all. Sound is ok. We checked the power supply unit and found out that 90v output is missing. We changed the power supply unit assuming that this is the cause, but still the 90v is missing. All the LED lights on in sequence and switch off after loading when I switch on the main power switch. This means no error. The TV can be switch on and off by the remote. Which board is probably the cause of this issue?


It sounds like the transformer on board has gone out (not the one in the power supply) and is no longer charging the panel. the board internally that holds the transformer will have a model number on it, any decent repair facility should allow you to ... Hitachi 55HDS69 55 in. Plasma Television

When I turn the TV on, the green power light comes on, then it turns red and finally begins to flash. There is no picture at all. I can get into the service codes via holding Volume down and input while clicking main power and get the "K" indication and can get menus with VOl up and Channel down. This should confirm backlight and power supply. Could there be a synch error?


Your TV will need to go to service agent for repair. ... Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television

I have a magnavox42mf439bf7 tv the tv wont light or sound i have change the power supply but the only thing it does is the green led flashes 15 to 20 times no pic no sound


... Magnavox 42MF439BF7 42 in. TV

TCL TV 21E11 . upon pushing the main power botton on standby green led do not lit but you can hear oscillating sound.


... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1877 seconds