Having problems with your Flat Panel Televisions ?

Our tv shut itself off last night and now it won't turn on all three lights just stay blinking? Do I replace the lamp?


\015 I have replace the lamp before but how do I know it's the same problem?\015

Answers :

Check this link to get more details. Blinking codes to this TV is described in detail there.

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I picked up a Mitsubishi Model No. WD- 62527. The guy said all it needed was the lamp replaced, I replaced it and the tv still doesn't turn on. Their is a green light that blinks were it says timer for about a minute then the orange light under lamp turns on. About a second later the green light under timer blinks three times then turns off and then the only light on is the lamp orange light. It will continue to do this hole scenario over and over again...HELP!


... Projection Televisions

I have a samsung HLN5065W dlptv. My wife turned it on one night and no picture. we did get sound. i noticed when I turn the tv on, it shuts down and restarts to no avail. I see a blinking lamp light and after a few restart attempts, i get the three blinking lights. I have replaced a lamp supplied by samsung parts. still no picture. same three lights blinking. do you have any ideas?


The tv also have a board that call the Ballast board could be dead too.This Ballast board only job are to ignite the tv projection lamp. ... Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

Our tv shut itself off last night and now it won't turn on all three lights just stay blinking? Do I replace the lamp?


Check this link to get more details. Blinking codes to this TV is described in detail there. ... Hitachi 50V720 Television

Replaced lamp light in Samsung HLT4675XS/XAA 1 year ago. TV is now turning off. The lamp light looks colorful but not bright. The standby light stays on after turning off the TV. Lamp light blinks twice and off.


I have a model close to yours & mine did the same thing. Its an easy fix the problem is its over heating. Unplug the tv take all the panels off the back of the tv and you will see lots of computer boards but look for one that has heat sinks and & ... Samsung DLP HL-P5663W 56" TV

My Panasonic 61 inch projection tv will not stay on. I replaced the lamp, but that didn't resolve the problem. It will come on then picture and sound goes out. The green light stays on until I turn tv off. I wait for the red light to stop blinking, then turn it back on. It may stay on few minutes or few hours...HELP


... Panasonic PT-61LCX65 61" Rear Projection HDTV

Have Samsung HL-S466W- Replaced Lamp (OEM), Replaced Color Wheel, Replaced Ballast. Currently the fan turns on for a few seconds, all three lights blink: Timer,Lamp, Standby. No Video or on screen sound. Lamp doesn't power on, nor can I really hear if the color wheel is activating. What can I troublshoot next before investing more in this model? Already verified the wires are correctly in place and the back door panel is tightly secured to activate the power switch.


... Samsung HL-S4666W Television

I just replaced both the lamp & ballast on my LG 52SX4S (5 yrs old). The front indicator light scrolls for couple minutes, then top 2 lights turn red with second light blinking. Then the top light stays red for minute and it repeats the process. Someone suggested the power supply board should be replaced, what do you suggest>


I have had the same model HDTV and had the same issue. It was the power supply and I got it replaced at a TV repair shop for 300.00. ... LG 52SX4D 52" HDTV

Samsung HLT5075SX/XAA. TV is around 3 years old. Once TV is turned on there is no sound coming off, green light is blinking then turns into red then tries to start with green blinking. Fan turns on when red light is on. Then after a bit all of light blinking. Replaced lamp, that didn't fix it. Was told here to replace ballast. Replaced ballast the same problem occurs. No ballast light when the TV is turned on. Bought the service manual.


... Samsung Standard (CRT) Televisions

PANASONIC PT-60LC14 ? Hey I have a Panasonic PT-60lc14 TV and when I turn it on it shuts off about 3 or 4 seconds later and the temp light flashes... I replaced the lamp because it needed to be replaced but it will not stay on longer than 4 seconds, idk what's wrong, the temp light blinks once every five secs about.. any ideas? ? Help muchhhh appreciated.


Check your remote it may be in a different mode or your wires or cables maybe disconnected also sounds like your auto shut off has been activated ... Panasonic Projection Televisions

Three blinking light on the front of my samsung DLP flashed and TV would not turn on. I replaced the Lamp($154) and now the picture is great. worked the night before 3hrs, and the next mourning if turns off 5 min when watching the news. Any ideal on how to fix this problem??rn Frank Pangelinan


... Samsung HL-R5656W 56" DLP HDTV

I have a samsung dlp model hls5086wx/xxa that recently stopped working. Lamp light came on so I assumed the lamp needed replaced. Replaced the lamp and still won't turn on and lamp light blinking. It also make a whining noise when turned on but I don't get a picture. Is it the color wheel or ballast? Any suggestions?


... Samsung Projection Televisions

The lamp has just been replaced and now the tv will only stay on for 30 minutes and then turn itself off. The lamp indicator light is red. We can turn the tv back on and the light goes off. Six months ago the optical engine and the lamp were replaced. That lamp only lasted six months and the picture went dark.


Did you press the System Reset button with a ball point pin on the front of the set? You might have a ballast going bad if it has never been replaced. But first, the reset button then you may have a thermal switch which is located just above the la ... Mitsubishi WD73727 73" HDTV

Sony 3 lcd rear projection tv hd w/ wega gate. kdf-e42a10. tv will atempt to turn, shuts down, greem power light blinks 12 times on average. red standby light blinks 4 times. i replaced lamp [ xl 2400 100w].turn on tv, green light blinks 12 to 40 times shut down, red standby light blinks 4 times again,again, and again. frank.


Hi,\012\012The\012Standby/Power light of the TV blinks when there is any internal malfunction in\012the TV. The self-diagnostic function of the TV will cause the STANDBY light to\012blink or flash when the television dete ... Sony KDF-E42A10 42 in. LCD Television

I have a HLT61765X/XAA. I was watching TV when it suddenly shut off. I tried turning it back on but the lamp faded on and then faded off with one green blinking on the far right (which is lamp, I believe) and one red blinking. I unscrewed the panel and removed the lamp, then put it back in. Now the lamp is lighting up but cannot make it all the way, but stays on. I then hear two buzzing noises every couple of seconds and eventually the lamp light fades away, with both green lights along with the


... Samsung HLT6176S Television

MY SAMSUNG LAMP BUSTED AND I REPLACED IT, I TURNED IT ON AND IT STAYS ON FOR ABOUT 5 SECONDS AND TURNS BACK OFF, LAMP LIGHT AND ANOTHER LIGHT STAY ON ON THE POWER BUTTON.


Is this a projection TV or the LCD\015\012do you hear a clicking sound? if so, it's most probable the problem may be your ballast, that might not have enough voltage to keep on with your lamp, and that's why it shuts off.You could try rep ... Samsung Flat Panel Televisions

I have a Panasonic HDTV 1080i. The Tv keeps turning itself off and the power light turns yellow and blinks. If I wait for 5 minutes and press the power button the TV turns back on and sometimes it stays on and sometimes it switches back off. The lamp light does not light up or blink just the power button. Any ideas?


Hi,I am sorry to hear regarding the trouble. However, there are few possibilities that could cause the same issue. If you have electronics repair experience, and wanted to diagnose / repair the set yourself, revert and i would be able to ... Panasonic PT-60LC14 60" Rear Projection HDTV

I have a Mitsubishi wd-52525 HDTV... Picture went out and red indicator light came on. I shut off the tv and turned it back on and it made a crazy sound.. I shut it off and replaced the lamp. After installing the lamp I tried turning the tv back on and the green indicator light came on a blinked approximately 6-7 times and shut off and would repeat along with a crackling sound from the speakers. The green light is not continuous and you can not shut it off with out unplugging it from the wall. I


You must test the power supply inside. See if the fan is working, and thermostat is ok. test it.God bless you ... Mitsubishi WD-52525 52" Rear Projection HDTV

I've replaced the lamp for my panasonic 50DL54J. When i try to turn the tv on, the power button blinks green, then turns yellow, then the lamp red light blinks..and turns off. Can you please help?


Some times when the lamp is not sitting in place it will give you this problem. removed the lamp, put it back and make sure it goes all the way in. close the door and attach screws if any. remember if the lamp door is not close, your tv will not t ... Panasonic PT-50DL54 50" Rear Projection HDTV-Ready Television

Have a Hitchia 60a500v..Power would come on, but lamp light would blink red. Replaced lamp..now power won't stay on and lamp light stays red. Please help.


... Hitachi 51F500 51" Rear Projection HDTV-Ready Television

Hitachi Ultravision 50V710. Replaced the lamp bulb with the correct part step by step. Even cleaned out the dust that was inside before replacing. It went in fine, I put everything back together, but when I went to turn the tv on, it immediately turns off and the lamp light blinks! I bought the tv in 2006 everything has worked fine til' now. Any suggestions? I'm at a loss now...


Lamps going out are normal so don't worry. On this TV, if you replaced with an exact replacement then it's not the lamp. Something is not reattached properly or completely. Normally it pertains to ventilation or a lamp access panel being loose. C ... Projection Televisions

Have a PT50DL-54J . Just changed the lamp and it will not start back up.Just a blinking green light. For the past while theTV has been displaying "replace lamp" but I couls still watch it. Then one day it would not turn on at all. Same green blinking light. I thought it was the bulb because of the error message saying so. I changed the bulb and its THE SAME PRWhat's wrong. Does it need to be reset somehow or something or am I SOL


... Panasonic PT50LCX63 50" Rear Projection HDTV

Hitachi TV Model # 60VS810 powers up and fan turns on but when power goes off after blinking shortly, the fan also stops. Temperature light comes on and blinks continuosly. Lamp light stays off. What can be the problem? . Temperature light continues to blink and will not stop.


... Sony Projection Televisions

I have a Hitachi Ultravision model 50VF820. It will turn on and the blue light starts blinking and after a few seconds the lamp and temp red lights start flashing in order (power, temp, lamp). I had the lamp replaced about a year and a half ago but not the cooling fan. How do I know if it needs just a fan or another lamp as well?


Fans fail rarely---two years is average life for a lamp--at least take lamp out to examine it to see it is not shattered inside. ... Projection Televisions

I have a philips tv model number is 60PL9200D/37. when i turn on my tv the blue power light flashes and the lights and fans cut on but not the actual screen. after a few seconds of blinking the lights and fans turn off and a light symbol and key symbol come on at the power button. we have bought a replacement lamp buld and the item number to the bulb was PHI389 and it still does the same thing.


U hear alots of clinking too,when tv power on and the projection lamp tried to come on?Yes,tv have a problems with it board call the Ballast board also.This Ballast board only job is to help ignite the tv projection lamp. ... Philips 60PL9200D Projection Televisions

Just replaced lamp and when I turned tv on lamp doesn't light up and it makes a beeping noise from the lamp area and also lamp light blinks


... Samsung HLS6186 Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1995 seconds