Suggested Questions/Answers :
It is recommended you read all this kind of situations
For the past four years in January my TV picture get dark. I call the repair man and he takes of the front and cleans the three tubes behind the front panel with compressed air and that remedies the problem for 12 months like clock work. I've watched him and was wondering if you could give me a detailed photo of the part I seperate from the tube inorder to clean them.....
Hitachi 46F500 46" Rear Projection HDTV-Ready Television
My TN61X81 cannot start. When plugs in, there is a "click" sound like relay action, but nothing else happens, screen is black, the front red LED flashes (not in a constant pulse), front "power" button doesn't work.
This kind of problem happened before, but it could be solved by re-connecting the power. This time it didn't work anymore!
We have the same problem with ours, not sure what exactly is wrong with it, but what we do is unplug the tv, take the back bottom panel off, and press down on all the circuit boards. After we do this the tv comes on and works fine, but we have to do ...
Toshiba TN61X81 61" Rear Projection Television
I bought one of your products acutally a 32 inc tv and I have it for Atlesst 8 months I really don't watch tv so is not like the tv could had been mess up and is sad to say and I am really upset my tv doesn't work how could this be so soon!
Hindsight is wonderful---always suggest a extended warranty since it either gets fixed or exchanged.Most sets come with a one year parts and labor warranty but not all.If the set is dead let me know brand and model number (on label on ...
Coby Flat Panel Televisions
I am wondering where I can find a manual for this product or something to explain how it works? I have a red LED lit on the front and I am wondering if that is normal or if it should be green like the rest of my splitters? What does red light mean?
Most major manufacturers supply manuals\012online so if you were to log on to the manufacturer's web site, you\012may be pleasantly surprised as usually, if available, one is able to\012download, by model number, Customer\012Instruction Manu ...
Flat Panel Televisions
I have a mitsubishi WS 65711, we were watching a dvd and the tv shut itself off and wont turn back on now. When u press the power put it acts like it will turn on then a second or 2 later will shut itself right back off. The green light doesnt blink or anything. We tried unplugging it for a while then plugging it back in. We also tried resetting it but that didnt work either. Can u give us any possibilities as to what to check for, like a fuse. Or what u think it could be. Thanks for the help.
Hello,It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current pass ...
Flat Panel Televisions
I have a VP50HDTV20A, was watching tv this past Sunday and all of a sudden it shut off. Tried to manually turn it on and then noticed that the yellow/green light was off....acts like there isn't any power getting to it. Checked all outlets, they work with other electrical cords, un-plugged tv and plugged in again....nothing? I wonder if this is something that can be fixed or if anyone else has encountered this problem? I don't want to have a tech come to fix it and spend the money to do it i
Could be the fuse? try replacing the fuse.\015\012http://www.diyfixit.co.uk/electrics/fuse-changing-1.html\015\012\015\012Adam ...
Vizio P50HDTV20A 50 in. Plasma HDTV
My remote controller for my 32LG30 seems like does not work properly, I tested with a camera, I could see the infrared light. After I bought the small receiving card and replaced in the TV, but the fault continued, I can operate TV with one side buttons, but not with my remote controller, I wonder if you can tell me how the check that remote controler is sending the proper pulses?, and how to re-program the unit in case I need to.
More likely that it has dirty switch that select the front IR receiver or the Rear panel (see page 8) Remote control input that failed to select the fron IR remote, insert a miniphone plug in to the remote input jack in and out a couple times to clea ...
LG 32LG30 32 in. LCD HDTV
Toshiba 32AF44. While watching a baseball game yesterday, the volume bar appeared by itself and scrolled down to zero. The bar will not disappear. It's like someone is holding the down button. Tried using the TV remote to raise the volume, change channels, turn TV off. The remote changes nothing. So, I took batteries out of remote to isolate the problem to the TV. Using only the buttons on front of TV: On-off button will not turn off the TV. Volume-up button works until I release, and then
Toshiba 32AF44 32" TV
I've got a Tek 82cm Platinum LCD TV. The problem is as follow: It was working fine and the next day it was not. I try to search for the tv channels but it does'nt fined any channels. The av is working but i can't get the tv channles. So i can't watch tv. What could it be and what can i do or try to get it working again to watch tv.
Flat Panel Televisions
We tried to watch a basketball game on the projector. We used a vcr player, and had it switched to t.v. for the receiver. The picture was not good at all, it could be focused in, but the contrast and color did not seem to help much. The room was dark. We could not make out the images very well, and thus watched the game on regular t.v. the vcr player did work well, and we even slipped in a vcr tape, and it was much better. How can we have a good tv picture.
Try running a picture streaming from laptop or desktop / tower pc. use a 15 pin din connector (monitor cable) to achieve this and your picture on your projector will be much better. HDTV quality. any other questions email me back at ...
Flat Panel Televisions
I have a compaq w185q lcd monitor for pc.I have got a tv card with it so i can also watch tv with it.But today while watching tv on it i changed its input signal to something like 1600x..the screen suddenly black out with error message input signal out of range change to 1300 x..like this.and to change the setting i clicked menu from remote but menu doesnt appear so i couldnt reset it.it works fine when i switch to pc side but on tv side i get this error message.what to do please help!
Flat Panel Televisions
We bought this tv because it was internet ready and were very excited to be able to watch Netflix instantly on the tv. We followed the steps necessary to set up the netflix on the tv and entered the activation code and it worked for a while but now when we try and watch netflix on our tv, it looks like it's going to start up but then states: unable to connect to netflix though the internet is working and set up in the tv itself.
Its not your TV its Netflix. Go to Netflix Watch TV Shows Online Watch Movies Online and find the support link. ...
LG 47LE5400 47 in. TV
I have a Hitachi 65f710 projection tv and is about 8 years old. We were watching it and it turned off on its own. When we try restarting it, it sounds like its going to turn on and then it sound like it shut off again. The screen remains black the whole time and no sound it heard. We did the whole unplug and replug again like the manuel states to do but nothing happened. What could it be?
I have a Mitsubishi WS-65411, there was a storm and we lost sound for several inputs, my husband worked around it by hooking up the stereo to one of the inputs that still works and we would get sound that way. We have several other things that we would like to hook up and we are running out of options. When we switch to ant a or ant b, there is the white noice, so speakers are working but the input on the front of the tv and all inputs to the rear have no sound. The input one two and three do
Inputs for this set are via a chip known as IC2K00 270P623010 IC - CXA2069Q. It is an signal input silicon chip and controls all of the inputs. The output is obviously working as are the speakers. Due to the work involved desoldering this chip and ...
Mitsubishi WS-65411 65" Rear Projection Television
I have a Zenith console TV bought in 1996 model # SY2722RK. While watching the last time it just went blank like someone had truned it off ( no picture and no sound ). I have done some work trying to figure out what it might be. The fuses are good and the power HOT section is working. The on/off relay is working correctly, but there seems to be no power getting to the flyback transformer or the rest of the tv's circuits. I did notice that the power transistor in the area of the flyback tran
Zenith SY2722RK TV
All of a sudden, last evening while watching, I got colored shadows around the images, like watching 3d without the glasses. Trying "convergence" I am only able to align the center "cross", the other 4 spots do not even seem to work. Is this repairable? or am I looking to buy new?
Hello spititttome!\015\012seems like one of the color tubes is worn out, it has to be replaced. contact your local service, and let them tell you before repairing how much it will cost. so you can decide to repair or buy a new one,\015\01 ...
Mitsubishi TS-50611 50" Rear Projection Television
M220va wont turn on when plugged in and has a small white led light on the bottom right of the front panel that slowly flashes on and off.
i've heard this light will come on when there is any problem with any of the boards, kind of like a safty shut off indicator. this makes it hard to diagnose since you cant look at any of the symptomes.
sooo... i was wondering if there were any "common problems" with this model that might most likely need to be replaced (power board? main board?) fuse se
Vizio M220VA 22 in. LCD HDTV
After watching for about 10 to 20 minutes the tv does something weird like your'e pressing the input button. It keeps switching from tv to vidio or whatever else happens when you press the input button. When the screen keeps switching like that it just goes back and forth so your picture keeps coming on for a second and then back off. If you try to press the input button to fix it nothing happens. You just have to turn off your tv. It has its own dvd player on the bottom. I'm wondering if that
Westinghouse 46W1HD 46 in. LCD TV
I can only get up to channel 22 by manually changing the channels. I tried a universal remote and could not get it to work. I would like to get all the channels like with my other tv. Any sugguesti
Polaroid FLM-3201 Television
I have a 5 years old LG PDP42V8 Flat Screen TV.
It worked fine and all of a sudden, something happened.
Basically, Sound is working, and even you can watch the tv.
but its very dim. it just looks like the light behind the tv is gone.
so its just not bright, and on a sunny day you cant see anything. but during night time, you can see soomething from the film on the tv. do you know what the issue might be, and can i fix this issue?
LG 42PC3D 42 in. Plasma Television
While plugging in a D.V.D.s connection the unit stopped responding to the remote control or the manual controls under the front panel. It will not respond to anything except pulling the plug out of the power point. There are two lights on the front of the unit: a green one under what looks like a clock symbol and a red light on the right side of that.Any help would be appreciated!
Hello\015\012You haven't specified anything about the device you uses. Without its brand name and model number, how can I powt a solution to you? Please provide these to me by FixYa please. ...
Flat Panel Televisions
I have replaced my lamp in my DLP model WD-62526 Mitsibishi but the screen is dark, so dark that I have to watch it with teh light off. But the funny thing is it isn't as dark as it was when it went though. I hav eremoved the back to search for the ballast but I couldn't find it. I think I would have to remove some more components of the Tv to see where it is. Could it be possible that one of the fuses could of went in the tv which is causing the tv to be dark. Also the HDMI doesn't work either.
Mitsubishi WD-62526 Projection TV
TV has worked just great since purchased in 04. Sat down this morning, grabbed the remote and nothing happened. I replaced the batteries in the remote, tried it again and nothing. I tried the manual power button on the front of the TV and still nothing. I tested the power outlet and it works fine. As I plug the TV in, I hear a soft click as if it is trying to power on but still nothing happens. I pushed the reset and it makes a soft click but still no picture or sound. Could you possibly help
Hi. This is an all too often occurrence. The TV's manufactured in the earlt to mid 1990s relied on an inferior set of capacitors in the power supply and mainboard components. They should have lasted about 25 to 30 years, but most are on ...
Hitachi 57F500 57" Rear Projection HDTV-Ready Television
Panasonic projection tv model tx 43p950x, there is power loss while I turn on the remote and there is no power when I pushed the button on front of the TV. Before it happen I connect an audio cable on the back right above mark monitor, and the other end to my amplifier audio. Then I hooked up a magic sing in front on the TV. I turn the TV and the Amplifier, both is on, then I turn on the magic sing and it works and I could hear the sound in my Amplifier speaker and so in the TV. Now I turn both
Panasonic Flat Panel Televisions