Suggested Questions/Answers :
It is recommended you read all this kind of situations
"I have a Haier L32f1120 TV, I purchased an hdmi adapter and cable yesterday to hook my Macbook Pro to the TV. It is hooked up correctly, but the TV is saying no signal when I'm in hdmi mode, I&
Haier Flat Panel Televisions
I am trying to hook up my macbook pro to my emerson tv using hdmi outlet in the back. However, it says "not supported format". How do i fix this?
Emerson LC320EM9 32 in. LCD HDTV
Vizio e470vle HDMI is correctly hooked up but still tv says No signal. Help guide in owners manual is no help. Anyone else have suggestions?
I have had this happen twice now and had to have the HDMI board replaced, It seems to be an issue for these 47 inch sets. Call Vizio! ...
Vizio VO47L 47 in. LCD TV
I have a Vizio TV that is stuck on RGB mode. This TV has been terrible since the first day. I can't reset it because the power button and the input button on the side have never worked properly and the remote we use to change to AV and HDMI isn't working for some reason and never turns on te TV. We usually have to turn on our TV with the DirecTV remote. The RGB mode has a blue screen that says "no signal" in yellow text at the top of the screen and turns off after five seconds. It's impossible t
Flat Panel Televisions
My sharp aquos Lc-32d62u has no sound when my ps3 is hooked up through hdmi. it keeps saying "an incompatible audio signal has been recieved ,check output device signal....what do i do ?
Sharp LC Flat Panel Televisions
I cannot get my wii to work when connected to my vizio hd tv. i have hooked the component cables correctly and it still says no signal
Vizio Flat Panel Televisions
How do i fix my samsung PS42C450 42-inch tv with 'mode not supported' error message Read more: Why does my tv say unsupported video signal with hdmi - The resolution is not supported on this tv please change the resolution samsung
Flat Panel Televisions
Church has two tvs and we hook them up to our Macbook pro and use a progam called Mediashout to play lyrics. When we have both tvs connected through a splitterbox they blink green and the image trembles. But when we remove the HDMI cable from the splitter and connect it straight to one TV its fine. How do i get the Two tvs to stop blinking? Help?
HDMI comunicates between the output device and the tv. The two components sync the comunication pulses. By conecting the second tv the pulses are out of sync. Somehow one tv must become Master. Is there a function on tv2 to turn off the sync puls? Ma ...
Flat Panel Televisions
Trying to hook up macbook pro to Sharp Aquos TV using hdmi cable. We only get black screen. What's wrong?
Sharp LC-32D64U LCD TV
Why does it say no signal when i hook up my xbox up to an hdmi????
Hi,I need to know that was xbox working fine before in HDMI input of tv?Did you tried any other video source in HDMI input of tv to confirm tv input?Did you checked xbox on another tv HDMI input to make sure xbox HDMI output is OK? ...
Sanyo 42 in. LCD TV
I have a 42 inch Magnavox with 4 hdmi ports to connect to. Only the hdmi -1 will work the others say they have no signal. When I change the tv to hdmi 2,3,or 4 and connect to the hdmi 2,3,or 4 it says no signal. I have direct tv HD.
Magnavox Flat Panel Televisions
I have a sony bravia KDL52V51000 and today it decides not to read the HDMI inputs. just says no signal. it recognizes that there is something plugged into my 3 and 4 inputs but when i click each of them just says no signal. sometimes i can get my input 4 to work which is my comcast box and then when i switch a channel it will say no signal again. any ideas on whats causing this problem. thanks.
Sony Bravia KDL52V5100 Compatible Swivel Wall Mount Free HDMI Cable
My pc is connected to my tv using an hdmi cord, it frequently cuts out and says no signal
Sounds like either the laptop's hdmi output, or the tv's hdmi input is the problem. You can findout wich one by connecting the laptop to another set and see if it still happens. If it goes away then it is your tv input, if it is still there it is the ...
LG Flat Panel Televisions
Problem: Signal de-resolution with HDMI hooked up. Olevia 232-S12.
I know this is a long shot with the Olevia being 4+ years old and now defunct.... but anyone familiar with pixelation with the HDMI port? It is very intermittent, but occasionally will cut out with white and colored pixels, with sound degradation. Thought it was my HDMI extension cable, but it happens now with my BluRay hooked up with a 4ft high quality cable.
Anyway to just replace the HDMI port? Or do I need to replace t
Syntax Olevia LT32HV 32 in. HD-Ready LCD Television
This RCA L26HD31 TV has always worked fine in other respects... but when I try to connect my pc's hdmi cable to it for use as a monitor, I just get "unusable signal". When this TV was made, hdmi outputs on laptops was not the norm - it was vga. Can this TV use an hdmi signal from a dell laptop? Yes, I'm using the correct input for the TV and have tried hdmi1 & 2 ports. - Thx
Make sure you have set the laptop's display properties to as low a resolution as possible (also make sure the screen refresh rate is 60 hertz) and turned it off before connecting it to the television. Turn the television on first and set to the corre ...
RCA L26HD31 26 in. LCD HDTV
Possibly did something in settings, as tv wont pick up signal on any input. it stared with my hdmi input....one day my sons ps3 no longer would work on tv. I figured hdmi input went out after I tried changing every setting in the input mode. Cable and wii still worked fine. one night I went to turn his tv off and hit wrong button. from that night on tv wont pick up signal on any input. No cable at all. Actually have cable coax, not hdmi for cable
Haier HLH32ATBB 32 in. LCD HDTV
I have problem with HDMI on SONY KDL 26U2000.
I bought digital satelite complette with HDMI. I connected it to TV.
But video and audio signall is sometimes shortly breaking.
More times on HD programs.
My service engiener checked cables - all are OK.
He checked satelite signall - all are OK
He checked satelite complete with another HD TV (Philips, LG, Samsung...) in his company. HDMI on satelite complette worked correctly.
I would ask you about help.
Sony's can be picky about HDMI.Check for software update that addresses HDMI issues.Contact Sony for software. ! 800 SONY USA ...
Flat Panel Televisions
Dvd connection we have our direct tv cables hooked up correctly we believe, because we get the signal just fine. When hooking up the A/V cables from the DVD player to the other ports available however, it doesnt pick up the signal after we change the Source on the TV. So basically, everytime we want to watch a dvd, I have to unhook the direct tv a/v cables and hook up the dvd av cables in the same ports. It works just fine then. But we would love to not have to go thru that process everytime.
Check the connection wire for any internal conductor break. Check it with a multimeter. ...
Sceptre X400BV-FHD 40 in. LCD TV
I have a samsung pn58c7000 and hdmi stopped working today. I used to connect pc and ps3 and now none will work. even plugged in individually. The tv does get a signal as HDMI1 light ups when I fire up the ps3 and HDMI 2 lights up when i fire up the pc with a device detected sound on the pc. TV still say no signal though. Any ideas?
Samsung PN58C7000 TV
I have an Insignia NS-LCD42HD-09 42 inch flat screen tv. The HDMI input works, but the component cable says no signal, and I only get cable on two channels. All other channels say no signal. The two channels I get have both picture and sound, and it is not my cable company because I plugged in another tv to the same cable, and everything works fine. I've had this TV for almost three years.
Insignia NS-LCD42HD-09 42 in. HD-Ready LCD TV
Sharp/autocontrolsignal When using a hdmi cable on my new Sharp Aquos LC60c6400u I get a black screen no sound and a signal saying recieving auto control signal now about every minute does any one have a idea sharp says they have never heard of this well I now know this is BS
Sharp Flat Panel Televisions