Having problems with your Flat Panel Televisions ?

Wharfedale DMP82 mini hi-fi unit. It's stuck in standby. When the standby switch is pressed, the display lights up then goes back to standby. LCD display is on as the 5v line is still present. The 2 x 14v lines are at 4v and rise momentarily as does the 12v line. The standby line is 0v then rises to 2.5v when the switch is pressed. Not an easy unit to take apart and I've only managed to get the back (PSU) off. Any ideas?



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Wharfedale DMP82 mini hi-fi unit. It's stuck in standby. When the standby switch is pressed, the display lights up then goes back to standby. LCD display is on as the 5v line is still present. The 2 x 14v lines are at 4v and rise momentarily as does the 12v line. The standby line is 0v then rises to 2.5v when the switch is pressed. Not an easy unit to take apart and I've only managed to get the back (PSU) off. Any ideas?


... Flat Panel Televisions

My Thomson DTI 6021-25 DVR is constantly displaying the following error message when I try to access my library or even turn off the box: "Your hard disk drive is not yet ready. It will be available shortly." I've tried turning it off at the mains overnight, resetting it by switching off at the mains and pressing power for 10 secs when turning back on, and resetting it by switching off at the mains and pressing menu for 10 secs when turning back on. Nothing has worked. In the help setti


... Flat Panel Televisions

I have a samsung ue40es6800 tv when switching from 3d back to normal 2d (3d off) the picture goes very dark with a strong red hue with a hint of blue. if u switch back to 3d, picture is displayed correctly again. You have to switch the tv into standby then turn back on and picture is normal no problems it only happens when exiting from 3d, changing channels once exited from 3d doesn't correct it.


... Samsung Flat Panel Televisions

M160I Steam Shower Unit. Just installing and tv won't come on. Checked connections and electricity all properly connected and electricity running through. Also on display board inside unit after turning to radio selection on. After few minutes of radio playing a "radio" icon starts flashing on display board. Then everything freezes up. Display board controller doesn't work, remotes do not work. Have to shut of circuit breaker at main to shut entire unit down then switch circuit breaker back on.


... Flat Panel Televisions

I Have A .AWA MHDV2411-03 When I Turn On The Mains Power Switch On The Tv - To On . The Red Stanby Led Lights Up As Normal Then I'll Press The Power Button On The Remote The Standby Led Lights Changes From Red To Green As Normal And The Tv Works Fine.When I Switch The Tv Off From The Remote Or The Mains Switch The Tv Switches Off As Normal. Now When I Go To Turn It Back On Again The Green Led Is On All The Time And The Tv Wont Work . When I Leave The Tv Switched Off And Disconected For Sev


... Standard (CRT) Televisions

Hi, i have a 32' LCD goodmans tv LD3261HDFVT. Had it about one and a half years now. Last few weeks when i switched it on the picture/sound would appear for 2 secs and then it switched itself off going back to standby. The last few days it's doing it everytime. as soon as i press the remote control i can hear the tv clicking and within 1 or 2 secs it switches off again. so i basically am unable to watch tv at all. Checked few sites and this seems a common problem. Can it be easily fixed by mysel


... Goodmans 257NS 20" TV

When you turn the Tv on it immediately goes into standby mode, when i try to take it off standby, the display light turns green, makes a strange sound and goes back into standby mode


... Goodmans 217NS TV

My 40 inch tevion LCD keeps cutting out and going on standby mode then when it's switched back on the blue light goes dim. Sometimes takes 10 min to come back on any sugestions please??


... Flat Panel Televisions

Tv plugged in and switched on, No standby light comes on there is a small red light on in the back of the set which would indicate power getting in but not switching on, Is there a fuse inside the unit or is it a throw away job ???


I HAVE A LG -HD TV AND THE POWER WILL NOT COME ON , THE POWER SWITCH CLICK ON AND THE RED LIGHT COME ON BUT THEN GO RIGHT BACK OFF ?? WHY IS THAT , ... LG RU-42PX10 42 in. HD-Ready Plasma Television

I have a Magnavox 20MF251W/37 that when I plug it in it turns on to the standby mode (red power light). When I power it on with remote or by pressing power button it does turn on (blue power light). Shortly thereafter, I do see an image (snow at this point since I don't have it plugged to any video source). However, that image stays on the screen for only 1 second then disappears. The unit is staying on and is NOT going back into standby mode (power lights stays blue). I have replaced main


Hi tempcheck,\015\012\015\012Lot of brand have a common symptom when there's a malfunction in inverter board, it will automatically shuts down the unit. This is because there is a protection circuit designed connected from this board to the mai ... Philips Flat Panel Televisions

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

Had this TV for a couple of years now. We bought it new. It has started switching itself on and off standby. When you press any button on the remote control the screen goes black then comes back on again a couple of seconds later Cannot turn volume up or down for this reason Cannot access the in-built programme information We could switch to HDMI and watch things on the playstation last night, but now it has stopped allowing us to do this too. Changed batteries on remote Please


With no make or model, it is a little difficult to try and decide what the problem might be but, I would disconnect the touch button panel on the TV, if it has one. That could be the fault. ... Flat Panel Televisions

I have LG LCD TV Model No: 22LF12R. The problem is the TV fell face down when it was still powered ON. Now when you switch it on the power LED comes on but there is nothing on the screen. When you press the remote control the LED responds or it blinks and when you power off on the remote it goes off and when you power on it comes on. The problem now is there is no display on the screen. There is no voltage in the display unit. Which components shoul I change. Hope u reply soon.


In my experience, there will be damage to the main pcboard, usually under the transformer.If you are lucky you can find all of the broken track and remake the track.Good luck. ... LG Flat Panel Televisions

Problem with TH-C50FD18:Gives off 2 blinks I replaced the D-board and the A-board to no avail. The power trips the moment the 15Volts ON occurs to send 15volt power to SS, D-board, A-board and SC-board. I found no short on this 15Volts line that is switched by the MC701 Power MICOM Processor. It looks like a 15Volt error is detected, nonetheless.That's why it always reverts to standby mode. Could this be a 15volts power regulation problem? (I suspected the affected unit could be the standby pow


... Panasonic VIERA TH-C50FD18 50 in. Plasma HDTV

Hyundai 32 Television was working fine until a few minutes ago. I tried to change the channel and since then it has started switching itself to and from standby. TV Switched on for about 3 seconds with channel 21 showing in the top left corner before switching itself back to standby again. the strange thing is that it will switch itself back on from standby. Anyone know what might be causing this?


That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally connected to the power co ... Flat Panel Televisions

Sony FD Trinitron WEGA..won't turn back on TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of an


Visit this site for details. All information about this type of fault [2 blinks of standby light to sony Trinitron]; are described here in detail."Electro-help", is the name of the site.Search for it on Google. ... Sony FD Trinitron WEGA KV-30HS420 30" TV

My sony bravia KDL32L504 will only display multiple colored bars and lines. Occasional pictures but it quickly switches back to the colored bars. Input would be greatly appreciated.


Hi hevener02,\015\012\015\012You have a problem on the T-con board/LCD controller board. If you can dis-assemble the unit, pull-out the connectors from that board then re-insert, try to power it on again, then observe if the symptom is s ... Sony Flat Panel Televisions

My plasma to has a very faint picture, with a red line running from top to bottom of screen. it takes several seconds to display a picure. I have taken off the back panel and looked at the compacitors they seem o'k, any suggestions! is it worth fixing???


... Philips 42PF9630A 42 in. Plasma Television

Sony KDL46EX710 Goes into power save mode almost every 45min Sleep Timer is not activated. The Screen switches off the standby light does not flash just stays green if u press the HDMI channel on the remote the tv comes back on with the message power save mode : Off


... Sony KDL46EX710 46 in. 3D LCD TV

Standby light sometimes comes on. When on and control box pressed turns green then switches back to red with clicking noises coming from set. Seems to be going through various sources.


Replace the power supply boardv or mainboard @www.shopjimmy.com ... Hitachi L32H01 32 in. HD-Ready LCD TV

After watching for about 10 to 20 minutes the tv does something weird like your'e pressing the input button. It keeps switching from tv to vidio or whatever else happens when you press the input button. When the screen keeps switching like that it just goes back and forth so your picture keeps coming on for a second and then back off. If you try to press the input button to fix it nothing happens. You just have to turn off your tv. It has its own dvd player on the bottom. I'm wondering if that


... Westinghouse 46W1HD 46 in. LCD TV

My technika LCD19DVDID-208 Takes 5 or 6 times of switching from standby on and off to get the screen to light up & the picture signal to come through. The sound comes through OK first time. Also some times the mains switch takes a numer of on off operations to get it to switch on to standby.


... GE 13TVR60 Combo

I own a Olevia LCD tv- model number 242-S11. I have had the tv for several years with no problems. As I was watching a show today- it shut down. No picture, no sound, no blue standby light. I flipped the switch on the back of the tv off, unplugged it from the power source and waited several minutes. When I plugged it back in and flipped the switch, i seen the blue standby light flicker on and then back off. Still no picture, sound, lights, nothing. Repeated the switch/plug again, but disco


... Flat Panel Televisions

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.


Blinking of standby light to Sony TVs are fault indications. Technically this is called blinking codes. From the number of blinks that occur at one time switch ON, you can get an idea about he faulty circuit location inside it. If you wish t ... Standard (CRT) Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1261 seconds