Having problems with your Flat Panel Televisions ?

32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of



Answers :

Log in new account

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

32" technika sky red eye picture is perfect remote works perfect but after 10 to 15 mins picture flicks of for a second then on again this happens randomly . Red eye works fine have installed loads of these red eyes an never a problem. Checked end at coax ok changed coax problem still happening. Try old style tv working fine. Noticed on back of tv were red eye goes in 5volts DC never seen this on any previous TVs when fitting. Sky rf outlet 9 volts could this b causing my problem. Can't think of


Log in new account ... Flat Panel Televisions

I have coax cable coming from my sky box to the tv upstairs previously this worked fine but the it stopped so I bought a new magic eye and this worked for a while the light on the magic eye is not working now, the picture on the tv is good and the remote works the tv fine can anyone advise what the problem could be


... Flat Panel Televisions

Just bought a luxor lcd tv and can't seem to be able to tune tv into my sky.i have a magic eye in the room that worked perfectly with my old portable tv,and still does.the problem lies with the tv as the sky is fine when i reconnected it to the portable.can't even get a picture on the new tv,can you help please


... Flat Panel Televisions

Hello I am using a Vision Link magic eye on a Samsung LE32R87 which works fine. I am replacing this 32 inch TV with a Samsung UE40D5520 in the same position with the same Vision Link magic eye. However when i connect the magic eye link to the 40 inch TV the red LED light on the magic eye does not come on and i am unable to control the SKY+HD box although am receiving sky TV on the TV. Any ideas please?


... Flat Panel Televisions

I have a jvc interiart tv and when i turn it on the picture breaks up as if i have no signal however my signal is fine and if i turn it on and off lots of times eventually it starts working and the picture is perfect and works well until i turn it off then back on again any ideas what the problem could be?


A few thoughts and a suggestion first.If using the coax fitting for the signal try connection of any DVD etc to a rear input to see if same problem. This will tell you if the problem is related to the TV's tuner.If using a cable/sat ... JVC Standard (CRT) Televisions

I have a Sony KP-57WS510 and am having problems converging. The red works fine however the blue cross on the outside colums of the convergence pattern is off to the left. I am unable to move these blue crosses far enough to the center to correct the problem. The picture on tv screen has a blue shadded bar on the left side and a yellow shadded bar on the right. I can temporarily correct the problem by turning the television off and then turn it back on. However, the problem does eventually return


The tv convergence board it is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.U have all the tools and also can do soldering ICS works?Yes,tries websites like Tvrepairworld.com,Tvrepairkits.c ... Sony KP-57WS510 57" Rear Projection HDTV

Philips Magnavox 9P6031C103 projection tv quit working 2 years ago (before, the picture began to shink and expand until it finally quit completely with no audio nor video -- turned it on two years later to double check the symptoms (whether there was any chirping sound) so we could order a repair kit and the tv worked perfectly fine for a couple of hours and then I turned it off, thinking the problem had worked itself out and no fixing was needed (must have been the bad Suddenlink connection th


Based on what you described I would say your TV has the "shrinking and expanding" fault. Its a common problem on that model and the symptoms can range from the video shrinking and expanding or no video or no audio....You can read more about this fix ... Philips Magnavox 9P6034C 60" Rear Projection Television

I just got a new player. Worked perfectly in the shop but brought it home and have a problem. After plugging it in it plays the DVD fine EXCEPT, the picture is in black and white. This was not a problem with my old player. I tried 8 DVD's with the same results. The color is great on the TV. I tried three different lines with the same results.


Select the type of video your TV requires within the menu of the DVD player and match it.If the TV requires CVBS input and you are supplying S-Video, then you will get a monochrome picture because the chroma content is not being used.Hope ... Flat Panel Televisions

Have Philips 60PL9200D/37, having red light temp problem, fixed fans, fans are working just fine but sometimes after the tv has been on, red temp light comes back on and screen goes black, turn it on and picture comes back


... Philips 60PL9200D Projection Televisions

Video input 1 and 2 stopped working suddenly after working perfectly fine for months never had this problem


I suppose you have tried another cable----if just one was bad or acting up I would suspect a broken connection at the in point on the set--leaves just one thing to try------hook same cable and vcr to another set......just to see if set or video unit ... Flat Panel Televisions

I am working on a JVC plasma TV with model number GM-V42UG TV come on and show picture perfect for about for 3 hours then gradually develop color smear in picture with grainy feature and flash at interval i never experience such problem I am asking for help my e-mail [email protected] Thank you jeremy


... JVC GM-V42UG 42 in. Plasma EDTV

I have had my samsung LN40B530 for 2 days now (got it used) BAD IDEA I Know I just dont have the $ for a new one anyway... everything was fine worked perfect and all of the sudden the picture almost paused it was moving very slowly and the colors were blending strangely I turned off the tv and turned it back on. All i have now on the screen is vertical lines white, blue, red and green. no picture sound is still there as well as all of the buttons being functional. Just vertical lines. I am a ver


The T-CON board is the place to start. If everything else is working (i.e. change channels, sound, etc) then this is almost certainly the problem.\012It's possible the problem is the connector(s) to the T-CON board. Over time the co ... Samsung LN40B530 40 in. LCD HDTV

I have a Philips 42pf7421d/37 lcd tv having problems. When you first turn the tv on it seems to work perfectly fine. About 5 minutes later my picture cuts out and I get a scrambled screen. Turn it off and on, same problem. Any ideas? Hoping I can get this fixed cheaply doing it myself. Im handy but dont know much about televisions. Thanks


First, you need to make sure all of the vent panels on the tv are clear of obstructions. Heating may be causing the problems. Next, get a hold of a clean, dry source of forced air and blow out the inside of the case and the internals of the tv. ... Flat Panel Televisions

PLEASE HELP! I awoke this morning to find that some how half of my tv doesn't work. The left side of the screen is red and blinks on and off, while the right side works perfect. The sound is still fine, just seems to be the picture. Any help would be much appreciated. Thank You for your time.


Check the screen back light as will as the inveter board which have loose contact or dry joints. ... Samsung LN46C530 TV

Was watching the tv and red horizontal lines just appeared on the screen, like something you would see out of a pricing gun or bar code reader. ive never had this problem before and the tv has worked fine until now. please help


Please include make and model of your unit. This will help in diagnosing your problem. ... Flat Panel Televisions

Sony kdf60xbr950 Having the same problem with no picture. Green lights blinks first then the red lamp light. My first thought is the lamp. Then I had talked to a tech and he tried to tell me that its the balist or the power supply and likley not the bulb? Has anybody else been throught this and what was the outcome. This is the original bulb with only about 1000-1500 hours on it ? was working fine one day and the next this ?


The problem here with the lamp is it has an average 2,000 hour life--only way for a "tech" to know if it is the problem is to replace it.The ballast is the power supply for the lamp---lamp goes bad a lot more often than the ballast= sounds li ... Sony Grand WEGA KDF-60XS955 60" Rear Projection HDTV

I have a TOSHIBA MODEL 36-A-40 YR 2000 (Tube Type) which works fine 98% of the time. It is connected to a Comcast cable box. It will occasionally go off for no apparent reason and then come back on in about 3-5 minutes. When it returns, it sometimes comes back on perfectly. Most other times it comes back on slowly with a large red strip across the tube and this will slowly but eventually blossom into a good video picture and the audio will return. If you hit the side of the console, tha


Bad solder connections do eventually happen for most sets from heat and expansion on the board--you have really solved this issue--you have a physical issue in the set and now you have to find where.If the picture were to dim out slowly and c ... Toshiba Standard (CRT) Televisions

Sky eye red light on but remote won't work


... Flat Panel Televisions

LG 37LC2D-EC My Tv has suddenly started to flick between a black screen and picture after it has been on for approx an hour. I have also had a message of "This display does not support HDCP". Does anyone have any idea whats happened? The HDMI cable port is connected to Sky+HD box and I have eliminated fault of HDMI cable as it works perfectly on another TV. I have eliminated Sky+HD box as it works perfectly on another TV. Could an over air/sky/playstation update have messed up the TV?


It sounds like the TV is having sync issues with your Sky+HD box. HDCP is the "High-bandwidth Digital Content Protection" that is used between components. It requires a sync between the devices to ensure that you are not trying to "steal" the video ... LG 37LC2D Television

Hi. We have an old analog TV (Sony) which has a new digibox running through it (since the switch over). Was fine, but over the last few weeks, intermittently, the screen goes black with EXT 1 in the top corner, but perfect sound. Change channel, no picture, perfect sound. If we fiddle with the aerial cable, the picture jumps back. This happens sometimes after 30 mins of perfect picture, and sometimes after 3 hours.. sometimes not at all!Have replaced cable, no joy - same problem - and to be fair


Your picture tube is on the (Verge) Of going. ... Flat Panel Televisions

My RCA flat screen was working just fine and than as I was watching TV the screen flickered off and the it started flashing unusable signal. I did a rescan of the channels a couple come back that I have never had before. The sound doesnt work on the few channels that I do get and the picture and sound doesnt work on the ones I use to get. I also tried to put a dvd in. The sound works but not the picture doesnt. What do I do


... RCA Flat Panel Televisions

Hi i have a 42 lg tv modle number 42LB2DE-AA.AAUMLH WHE TURNED ON IT RUNS FINE AND ALL FUNCTIONS WORK FINE BUT AFTER 30 MINUTES I LOOSE THE PICTURE AND THE SOUND BUT IF I TURN IT OFF FOR AN HOUR OR TWO AND TURN IT BACK ON IT WORKS FINE AGAIN TILL THE 30 MINUTES AND THE PROBLEM REPEATS AGAINTHANKS FOR YOUR HELP WITH THIS


... LG Flat Panel Televisions

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


No picture on a DLP when you can see the lamp is working is ALWAYS the DLP chip. BECAUSE you recently replaced the color wheel, i suspect that the LVDS/data cable to the light engine was not plugged in well and has come loose. I suggest checking and ... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

I have an older Mitsubishi TV, model VS-50605, that has been giving me problems. I am not able to consistently get a picture and/or sound through cable. All my other inputs work properly. I can play my Xbox on it and my DVD player works fine. Every now and then I get sound but no picture. On the rare occassion I get a picture through cable, it only lasts about 15 minutes at the most and then it cuts off. I've tried switching between ANT-A and ANT-B but had no luck resolving the issue. Any sugges


U have a pay boxes from those Telicoms,cables or satalites compannies?Yes,tries unplug,replug those boxes back about an hour later for it softwares to updates it softwares,should solved this problems or if not trade it in for a new box. ... Mitsubishi VS-50605 50" Rear Projection Television

I have a 43 inch samsung DLP tv 2004 model# HLN4365W, I was getting a black and white picture, so i replaced the color wheel which was broken. It worked fine for a couple of days then there was no picture, i have sound. The lamp is working - no errors on front panel. If i look in the back of the tv i can see light coming out of the lens, but no picture on the screen. What could be the problem? Thanks


... Samsung HLN4365W 43" Rear Projection HDTV-Ready Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2362 seconds