It sounds to be a back-light CCFL lamp fault. Check the lamps for uniform illumination all the way. See whether there is dakened ends to them.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
RCA 42" LED TV Has Picture Issues on Half of the TV
It sounds to be a back-light CCFL lamp fault. Check the lamps for uniform illumination all the way. See whether there is dakened ends to them. ...
Flat Panel Televisions
My LG led has had several problems, it started out with the left half of the screen flipping as if viewed from a mirror with the right part of the screen normal. After that, it displayed vertical colored lines (blue, yellow, black, white, etc) which went away and now it shows a vertical bar about 4 inches across that looks darker than the rest of the picture. I also noticed images burning in everywhere except that bar. I know it's a lot of issues but any help would be appreciated.
This problems are a very tipical of the coded pixels on the LCD screen panel passes through the board that call the T-CON decoder board to causing this problems.Vertical colors lines display on the LCD screen panel happen by itself.Yes.The T-CON deco ...
LG 32LE5300 Widescreen 32 in. HDTV
I am having issues with my RCA Scenium D52W135D (playstation 3 connection). Recently, I have been having a very specific problem with this combo. I have it connected using HDMI to a Pioneer receiver (model# VSX-821-K). From this, an HDMI to DVI cable to the TV for HD picture. In the past, no issues at all. Recently, I can play DVDs/bluray discs and get full picture and surround sound. I can play PS2 games and get picture and sound. When I try to play PS3 games, I get sound through the rec
Had the same problem. With mine the other day you probably moved your Playstation 3 too another tv and set your 1080i,720,480 to high deaf on settings in Playstation. You have to change them back to automatic that TV says HDTV but it only plays Plays ...
RCA D52W135D 52 in. TV/DVD Combo
Magnavox 32MF605W/17, flicks, no picture.
Firts there was no picture, LED stayed amber. I opened it up, replaced 5 blown caps on mainboard, now when TV is turned on, LED is green, screen flicks white for half-second, then goes black, LED stays green. Does it look like inverter board is bad, can't light up CFLs?
Philips Flat Panel Televisions
RCA F25441 Chassis CTC203AF9 - Intermittent loss of vertical (top half of screen goes black or has wavy lines, bottom half has about 3 inch picture band)
RCA F25441 25" TV
Only get half a picture on my RCA television. only getting the bottom half of the picture
If you can locate the vertical IC (located on a heatsink) you will find this IC needs resoldering. This is a common problem with RCA TVs. The vertical IC is of a TDA series number. It will have seven pins. Examine very close and you will see cracks ...
Standard (CRT) Televisions
Toshiba 32C3500E Regza suffering for the old power issue BUT NOT the three yellow blinkis of the power LED - TV comes on after full power down - say 10 mins; starts ok, sound and picture ok, the the 'surge' noise, picture goes off, sound goes GREEN LED stays on - need a cold start again but less than 60 seconds same old prob. Know where I can get firmware as I would like to try this before calling bob-the-builder
Flat Panel Televisions
Our model 27V412T RCA TV.....the top half of the screen is blank.....the bottom half of the screen has bottom half of the picture.
RCA Flat Panel Televisions
Hi, my philips 42pf9631d is giving me lots of issue in terms of picture quality, in hd with hdmi any picture is purple and in rca i can see zig zag lines in the backgroud of the picture but colors are sort of ok. It gets very hot and ambilight works on is own..
Pls help thanks
Flat Panel Televisions
My vi 42 in led lcd vizio works great for like 30 mins to an hour then the picture disapears but the audio is still intact and playing whats the issue has anybody else had this issue the tv is less than a year old
Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally c ...
Vizio Flat Panel Televisions
Hello got a Rca model 52wh74 seriel #c222c1072 Manufactory date May 2006 this has the convergence issue 3 D Look and a bow in the picture were you see three of all the colors I also went to the menu to try to adjust the convergence but No option to do that I do have some tv repair experence and soldering ability -- They have talked about a fuse that can open up and possible cause this no option issue for the convergence or resoldering the fly bac
The convergence ICs are the most likely cause of this problem. STK392-150 is the ICs that you need -2 of them. You can purchase Sanyo STK392-150 FROM EBAY for about 15$ a piece. As for the fuse, I am not sure what are the specs of the fuse but you ca ...
RCA HD52W59 HDTV Projection Television
I have lg ru50pz61 plasma after turning on after ABOUT 20 MINS I LOSE HALF THE SRCEEN PICTURE IT STARTS TO JUMP THEN I HAVE LINES AND NO PICTURE YOU CAN SEE THEN AFTER ABOUT OTHER TEN MINS TH HOLD SCREEN DOES IT DOES ANY ONE KNOW WHAT COULD B THE ISSU AND PARTS I MIGHT NEED TO FIX THIDS THANK YOU FOR ALL UR HELP
If it's under warranty have it return to the supplier for replacement. It's hard to diagnose the problem without opening your TV. It could be the vertical IC that is usually a problem in most CRT. It's really hard to tell without scanning the board.\ ...
LG Flat Panel Televisions
Almost every day our t.v. fades in&out for a few seconds. Maybe once. Maybe twice or more. It's seems to be the back ground of the picture. It's during the light of the day. Good color. No other issues & we really like set. It's 46" LED. we bought @ Xmas. Can you help. R.Barg 586-731-6060. THANK YOU
Samsung PCL5415RB 54" Rear Projection Television
Hello, I have an RCA standard definition television. Whenever I press the power button, instead of turning on the red power LED flashes (about 24 times) and then stays lit. There is no picture or sound, the tv stays black. Can you give me any advice on solving this problem?
The High voltage Horizontal output transistor is dead.That the transistor sit outside of the wall of the FBT-flyback tranformer is a black block of plastic with a red wire with a cap hook to a CRT-(tv tube) U have soldering iron,a roll of solders and ...
RCA TruFlat 27F520T 27" TV
Pn50a400 50 inch plasma: issue: Once turned on, about half an hour later, the picture goes black. The power and sound are still good. Any idea what the problem may be? Thanks
Samsung PN50A450 50 in. Plasma HDTV
Hi i have a samsung ue40c8000, im getting problem where the left half of the screen goes all fussy with a bad picture but the right side is fine.
If you tap the tv it goes back to normal again.
Ive changed the power board and the Tcon board but am still getting exactly the same issue.
Where do i go from here? Or is it scrap?
Thanks, any help would be much appreciated.
Flat Panel Televisions
We have an RCA model RLED4010A TV obtained new in January. It has been working well, and is compatible with our Bell system. Today it unexpectedly turned off. I unplugged from the source, waited, then plugged back in. The red light on the front bottom right corner came on, but appeared to be only half on. When I used the remote and turned the unit on, the blue light came on, but no picture or sound appeared, then the blue light went out. I repeated the unplugging process a couple of times
Flat Panel Televisions
I have a 55' Vizio Tru LED model VF552XVT. The TV ran fine for a year and a half and just recently the screen started shutting off after a few hours. I am aware that there is an issue where Vizio
It sounds like an overheating issue with the T-con board. You shouldn't have to run a house fan behind the TV to keep the screen on. Make sure you have the TV in a place where there is enough space around it to allow for air flow. Also, check to make ...
Vizio VF552XVT 55" inch Class XVT Series TRULED 240Hz sps LED LCD
Mitsubishi wd-73737 turns on for a few moments then the picture flickers and turns off after a new lamp replacement. A red led appears and I get error code #34. I have carefully cleaned dust out of the unit as many people have suggested but I am still having this issue. I am using lamp 915B403001 purchased from an official Mitsubishi reseller. This is the second time I have replaced the lamp, the first replacement worked perfectly.
Mitsubishi WD-73737 73 in. HD-Ready TV
RCA D52W23: Only partial convergence menu. I can only access Autoconvergence, Red and Blue convergence options (not Level 1, 2, 3, etc.) in the service menu. The picture is only slightly off (i.e. green and red for people's eyes, etc.) Does this mean there is an issue with the green CRT module (board)? Thanks! spiro PS - Some background: I initially found the TV on the curb. The convergence option was missing, and I repaired it using ITC222 ITC222A convergence repair kit (replaced FL231, DL231
Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>Projection TV sets have two v ...
RCA D52W23 52" HDTV CRT TV
I have an RCA HDTV model number L22HD31 and the picture no longer comes on at all. When the on button is pushed the blue LED light comes on and then turns off, but the screen never comes on. Whats wrong with my TV?
10 to 1 its the power supply. Remove all screws from rear panel - locate power supply - check for busted/bulged/expanded caps if you see any and if you have component level repair experience replace them. If not find the part number of the power su ...
RCA L22HD31 22 in. LCD HDTV