Having problems with your Flat Panel Televisions ?

I have a Element Tv Model ELGFW551,I am getting a thin green vertical down the center of the screen.Can you tell me if this is a board problem or a connection problem eg. ribbons not making contact etc.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have a Element Tv Model ELGFW551,I am getting a thin green vertical down the center of the screen.Can you tell me if this is a board problem or a connection problem eg. ribbons not making contact etc.


... Flat Panel Televisions

Viera TC-P50ST30 My TV is DOA. No power, sound, etc. No standby light. Confirmed house fuse, batteries, plus, etc. good. Tried unplugging for awhile. Makes a noise when I plug in to powerstrip or directly to wall. Someone said possible short. Pulled back cover. Checked ribbon between power supply and main board. Meter reads 5 when main not plugged into power. Drops to 2-3 when plugged to main. Is that where the short is? Isolated main by disconnecting all other connections to main. Should I ju


This may help... ... Panasonic Viera TH-50PZ85U Plasma TV

For a yamaha clp 860 keyboard can you tell me how the pedals are wired (order of colors)? Mine came apart when I was trying to repair one of the connections and now I don't know how make the connections. there are 5 wires and i need to know what contacts they go to.


... Flat Panel Televisions

I am having the death click problem with my 42PFP5332D/37. When plugged in, all it makes is a rhythmic clicking noise. I pulled the back off and found the clicking noise was a relay # SDT-S-105DMR. There are a pair of them in the big board in the middle of the back. I pulled the covers of the relays and the one on the left is actuating up and down and sparking. Can anyone tell me what the cause is and if there is a reasonable fix for this.


I can tell you whats the problem , if you can tell me whether the LED at the front blinks or not. IF it does then how many times it blinks in between each pause? The relay clicking constantly is a problem associated with faulty electrolytic capacitor ... Philips 42PFP5332D 42 in. Plasma Television

42PZ77U Panny Plasma tv. I just sent the SC board for repair, but in putting it back in the SU board(s) TNPA4383 that are connected together by a little plastic ribbon type cable, one side pulled out and a little tab popped up. I put the end back into the connector and pushed the tab back down and it clicked. Is this how that little ribbon piece fits in? Don't want to turn it on now as I'm afraid of that little connection might be fubar. Any clue? Thanks.


This is how the connect, just make sure that they are connected tightly and that you didn't bend any of the pins and you should be good to go. A bad ribbon cable connection on the bottom will result in a vertical black bar though the screen, if the r ... Panasonic TH-42PZ77U TV

I have a lg blue ray bd550 home theatre system. I have been using it for a few months now. For some reason, my netflix has stopped working. Everything else works so I know it's not an internet connection problem. Whenever I try to use the netflix account, it reads "Cannot connect to Netflix. Please try again later. If the problem persists, please visit netflix.com/tvhelp on your computer." I have done this and it tells me I should connect LG. What do I need to do to fix this problem? Thanks!


... Flat Panel Televisions

M220va wont turn on when plugged in and has a small white led light on the bottom right of the front panel that slowly flashes on and off. i've heard this light will come on when there is any problem with any of the boards, kind of like a safty shut off indicator. this makes it hard to diagnose since you cant look at any of the symptomes. sooo... i was wondering if there were any "common problems" with this model that might most likely need to be replaced (power board? main board?) fuse se


... Vizio M220VA 22 in. LCD HDTV

So i have got a toshiba 27a43 and 1st there is no a reset option in my menu and 2nd there is no a reset option on my remute . So can you tell my the original settings of the picture , the sound etc. ( i trid to make them better but I messed up) or tell me how to reset all the options (make sure your dont forget that my remute and tv menu dont have such option)


... Toshiba 27A43 27" TV

Bad ribbon cable connection on LG Plasma 42PQ30 ysus board


... LG 42PQ30 42 in. Plasma TV

HDMI connection makes noise when you switch channels.Composite/component connection no problem.


Check the backlight condition. Visit the site named 'Electro-help' for\012more details. Click this link. View it in \012"Timeslide" or " ... Flat Panel Televisions

I have an 42 inch LG 1080p LCD TV. I am experiencing intermintent grainy lines on my coax connection. DVD is just fine. I have had this problem with Dish Netwok and now Comcast. Makes me think there is a problem with the tv. Also, I have a 32 inch lcd and a 19 inch lcd, both 720p, no problems there. Any ideas on what the problem might be??


Sounds like a bad connection.\015\012\015\012Have you tried another tv on the same aerial lead ? ... Flat Panel Televisions

Samsung 43 Television set will not turn on makes 4 clicks & shuts off. Which system board usually causes this problem the power supply board or the X & Y board and how do I test It ?


Try changing the input device to something you are sure works. Switch off TV manually, switch off power, remove plug and retry after 48 hours. If problem persists, please refer it to a qualified service technician. ... Samsung 43 PN43D450A2D Plasma TV

I have a LT37HVS Olevia flat-screen that has a similar problem to one of the posts. I had the same blue standby type light on the front that stays lit, but turning it on just makes this light blink, and no display. I did as the posts here sugested, peeled it apart and manually inspected all of the capacitors. To my dismay I haven't seen one yet that looks bloated or leaky. I have inspected the main power supply board, both display boards and the main board. There were a few capacitors that


If turning it on makes the light blink then its a clear case of open circuit.. Honestly there are lots of components like diodes, fuses, transistors etc., and either of them if shorted create an open circuit. I do not think this is a capacitor proble ... Olevia LT37HVS 37 in. LCD HDTV

Hi, I have searched all over internet and I think you are the only one who may exactly know whats the problem. I have a Toshiba Regza 37" which has no picture but sounds works perfect. The thing is if you really focus the picture is there but its too dull and dark to see it properly. Ive heard something about switching T-Con board.. please let me know which one of the boards is that(any sign or specific connection?) and where can I buy one? Thank you very much and best regards kamran


If you can see an image and it's OK - no distortions or corruption - then it's not an image problem, it's a backlighting problem. This means that the faulty part is not the T-con or any other board that works on the image, it's the inverter - the bo ... Flat Panel Televisions

I ve 42lm6200 model brought from usa ,nw its in bangalore ,i also videocon d2h connection...please tell how i have to connect av cables to tv panel board???????


I do have the same problem , can some one please help me how to use 42Lm6200 in india which is brought from USA ... LG 42LM6200 Television

Hello. My tv will not turn on. I metered the power circuit as far as I could, and it looks ok. The fuse on the control board is good. The power switch meters good. When the tv failed I heard a small popping sound, but did not smell any smoke from a damaged component. I cannot tell if the problem is with the control board, or with the picture tube. Thanks


It sounds that the power supply regulator section or main board has the fault. Check it with the help of schematics. If you are not handy, seek any technician's support. ... Emerson EWF2006 TV

Hello, i have the sony flat panel display, model fwd-50px2, and as somebody says, when i plug it, red power light come on, i push it to turn on and the green light come on, makes a click and sounds like doing something but no image on the screen, it stays black, i think could be a board, because the fans don't work either, so, i writting you to ask which board i need to get, or what do you think the problem is, i really appreciate your help. Thankyou so much.


... Sony FWD50PX2/S 50 in. Plasma Television

I have a HP 4260N Plasma TV. About 4-5 years old. A week ago the remote would not turn the TV on, and there was no volume. I contacted my cable company and thinking it might be a remote problem they had me reset the TV and the Cable Box. So now, the remote and TV are working correctly from an on/off perspective, but the picture is horrible. Very faint, no color or limited color, and a bit fuzzy. Is this the dreaded bad YSUS Board problem??


... HP PL4260N 42 in. Plasma HDTV

Toshiba 50A62 50-Inch Projection TV displays black lines across screen running from top-to-bottom and the resolution goes off the screen. When I apply force to the top of the television and or back of the television where the connections are made from my DVD Player, Xbox 360, etc. the lines go away for awhile and then come back. I read somewhere that, to fix this, I would need to do something to the area that makes the connection between the projection and the actual input. I am horrible with


Wadasdasdasdasdasdaw ... Toshiba 50A62 50" Rear Projection Television

The TV makes a click noise then the picture becomes I get parallel lines based on the colour of the picture at the time. The controls of the TV remote and when connected the Free view are frozen. Some time the picture rotas to the right at various speeds in Black and White. The TV is HD Ready and only 3 years old. I have an old analogue connected to the same Ariel but in a different room and that works fine with Terrestrial but with the problem TV I lost all channels and tried to re set them on


This is a classic switchmode power supply, has sensed a severe potential problem, and is shutting down to avoid a fire, explosion, or both. This set had developed a problem, that is so severe that the set must be shut down, This set should be removed ... Flat Panel Televisions

I have an Envision G22LWK monitor and it won't start for more than a few seconds. It flickers and turns off after a second or two. I have taken the monitor apart in an effort to identify the problem hardware, and when I disconnect one of the power terminals from the backlight it stops flickering when I turn it on. This is the JT229ZP6MR power board and the connector I remove connects on the bottom left corner of the board. The plug is labeled "P904" Albeit the flicker stopping, the moni


... Flat Panel Televisions

Dear sir, I gaved JVC LCD TV for cervice in kollam before 4 months. At this moment i did n't get the LCD TV. I contact many times, they are saying board problem. Actualy what is the problem idont know.sir, can you pls follow this matter.If u give ur email id, i will give the full detail. When i buy this lcd from abudhabi, they are told me internation warranty and good cervice i will get from kerala. Is this good cervice. I think you can take good action for my request. thank you very much for y


Yea its good sevice. ... JVC LT-32E488 32 in. LCD Television

I cleaned out my Samsung hl-s6187w and put everything back together and now it doesn't turn on. It makes a beeping noise like fast morse code and keeps cycling the power trying to turn on. The ballast gets about 270v from the power board, but the lamp never comes on. Could it be the ballast or the dmd board causing the problem? I can hear the color wheel spool up, but the beeping isn't consistent to be the color wheel.


Tv projection lamp inside the tv less than 2 years or so?Yes than the tv projection Lamp is good.You have this tv like 3 or 4 years already?The tv colors wheel even have been replace at leat once?No the tv probally require replacing the colors wheel ... Samsung HL-S6187W 61 in. HDTV

Bought a samsung 42' 4000 series tv, its less than 2 years old & the picture went bad looks worse than a really old tube tv watching an old VHS. contacted samsung-they don't care, referred me to a tv repair place (75$ to look at it) who said it needs a new sustain board, will cost 300.00 anyone else hear of this problem? anyway I can do it myself? where can I get a sustain board? why is samsung alienating their customers?


Why won't the Samsung Authorised Dealer repair the board? It's not that difficult!There will be a power fault and the picture is not "building" properly. At worst it will be one of the memory chips.With a reflo soldering machine, no probl ... Samsung LN-S4041D 40 in. LCD HDTV

Hi, my Panasonic Viera TH-42pv30 goes into standby by blinking with a 4 quick blinks and then a long solid blink. Ive been investigating this issue on the internet and have come across the blink error code 4 blinks Power SOS P Board. Ive disconnected all other devices connected to the plasma TV and changed power outlets however the problem is getting worse. The TV wont stay on for more than a minute now. Do you know what the problem can be and an approximate cost to fix it? The TV is no long


... Panasonic TH-50PV30 50 in. Plasma Television

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1840 seconds