Having problems with your Flat Panel Televisions ?

I have lost my remote for my JVC LT-32DA30J i need to retune my tv by using the set top buttons i can enter the menu but cant confirm my selection in the menu? is there are a confirm button available?? ive tried universal remotes(sky and an 8 in 1)' but same problem??? please help : /



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have lost my remote for my JVC LT-32DA30J i need to retune my tv by using the set top buttons i can enter the menu but cant confirm my selection in the menu? is there are a confirm button available?? ive tried universal remotes(sky and an 8 in 1)' but same problem??? please help : /


... Flat Panel Televisions

Every few mins the menu comes up on the screen then goes away i even removed the menu button on the tv thinking it was pushing the menu select button on the back of the tv to no avail.


Check the front control buttons switches inside for any struck, especially to menu button. ... Coby LEDTV2326 23 TV

Need to adjust horizontal position of picture, black bar on left side, lost picture on right side found a procedure to open menu by holding OK button on TV and remote simultaneously "for several minutes". One problem is the TV does not have a button labeled 'OK'. I tried it using 'Enter' and again using 'Menu', neither worked. Note, service manuals are suppposed to be available on the LG site, but I could not find them.


... LG 32LH30 32 in. LCD HDTV

I have tried to retune my acoustic Solutions freeview tv/dvd player (model astvd-31199-s2-id-hd), and it is now unresponsive. I pressed 'tv menu', selected 'settings' and 'auto retune'. It seemed to work, I.e., it produced a progress bar which over a few minutes completed. Tv then went black, and standby led began flashing. The tv will now do nothing else. Unresponsive to pressing remote buttons or tv buttons, won't even switch to an alternative mode (I.e., dvd mode). Tried unpluging and even re


... Flat Panel Televisions

TV staying on one channel only. Tried info, menu, mute power off. When it turned back on it showed the menu and option to reset, as per advice i have read on here. However the select / ok button on the remote does not seem to select the option, from what i read it is then supposed to switch itself off, when turned back on, it should then allow me to plug and play and start from the beginning as i did when it was first purchased. But it does not? :0( any advise welcome. Thanks in advance


Try to enter auto scan.. ... Flat Panel Televisions

I have an LG 42PG60UD. I am unable to access the menu on this set which I have had since new. If you press the menu button on the remote or the bottom of the set, the menu bar comes up on the screen. If you try then to select any of the sub menus, highlight them and press enter, the TV reverts back to normal viewing and the menu icons disappear. I am therefore unable to access any of the settings in this TV. I feel I need to get it back to the original factory settings so that it can update its


Did you try the buttons on the tv? See if it works and let me know. I am starting to think it needs a firmware update though ... LG 42PG60 42 in. HD-Ready Plasma TV

Philips 26pfl5522d/05 turn the tv on, blue screen once warmed up and DIGITAL TV the only menu option that works from the remote is the volume bar. Cannot Factory Reset as cannot access menu. Turned on tried once on holding and releasing MENU (on TV control panel button) nothing. Cannot select HDMI source (cross in grey square displayed), the tv has locked me out!! Please Help


... Flat Panel Televisions

The picture mode on my tv is stuck to wide. When I try accessing this feature through the remote's "p-mode" or "p-size" buttons it gives me an message on the screen that says "not available." I've also tried accessing this feature through the menu on the remote and on the side of the tv but I still keep getting this same error message. I tried reading through the manuel, but there is nothing under the troubleshooting area that helps or addresses this issue. Is there a way to reset the tv t


If it says "not available" then you have to try the settings of the input source such as a cable box or something. Chnage the aspect ratio to 16:9 . If you can get me the model number of the box I will see if I can get your precise instructions. ... Flat Panel Televisions

Couldn't initially set up my LUXOR LUX-32-914-IDTV for freeview. I can't get on the menu unless I use the actually buttons under the tv. I can only use to volume buttons on the universal remote. I've had enough of trying! Someone help me ASAP


... Standard (CRT) Televisions

Have a pioneer pdp 508xda, remote not working even after trying new batteries. Unable to access all channels using the buttons on the tv, only limited number of channels available (less than half). Is there a universal remote that i can purchase that will work with this tv as the people at jb hi-fi said they will not refund money if we buy universal remote and it doesn't work.


Try website like Remotes.com to buy an exact or very close to the original remote. ... Pioneer PDP-5080HD 50 in. Plasma HDTV

I have a Daewoo dtq-20u9sc tv. Out of the blue, channels are no longer available when selecting the input options (only av1, av2, av3, and cbykc...). I tried to go the the tuning menu, but no options are available there either (only says "Tuning"). Any help is appreciated, as I can no longer get my digital cable signal to show on the tv.


Same with mine. did it fix? ... Daewoo DTQ-20U9SC TV

Justght rcrn03br universal remote to operate my rca model 46la45rq lcd t.v. The code list came with i tried every code and tried brand search and auto program. All i can do is turn on my tv and change channel and turn up the volume. But can not use the menu key or pip or input buttons is there a easy way to get the code for my specific tv thanks.


... Flat Panel Televisions

Lg tv 50pq6000 keylock on cant select set up can some plz help tried holding menu button for hotel set up nothing happening


... Flat Panel Televisions

I have a JVC AV-48P777 and I lost the remote I'm trying to program the channels but dont know how to select the start button


... JVC AV48P777 Television

I have a panasonic 21 system/triple stereo/text TX-51GF85H tv. The problem is i can't adjust the brightness, colour etc.... The picture is fine only its showing too much colour and when watching a movie its too dark. I just want to tone it down. It opens at the menu but will not stop on what i want to adjust. It continues over and over through the whole setting/ thing on auto without stopping. Ive tried it on the preset buttons on the tv but just does the same thing. The remote is missing and t


Hello Ruth,\015\012\015\012I don't think there is any problem with your TV or your remote control. I think you have the picture menu option set to P-AUTO. If you press the RECALL button on the Panasonic remote you wil ... Panasonic Projection Televisions

After selection an input option the input menu stays up until you push "exit". Then it reverts to the tv input option canceling out any other menu selection. If you then try another route to get rid of the input menu I tried using the visual tuning,(brightness etc.) it quickly files through all options over and over. What can I do? This tv has been great up until now.


What has happened is there is a controller for menus and the selection of channel's av hdmi etcafter a hwile with some tvs they start to go on the blink it coud be worse i have had people with tvs that wont change channel keep jumping back and people ... Vizio VX37L Television

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

What's your problem?I have Samsung CS-29Z57MQ (29in CRT Slim TV) and due to curverd corners I tried to set using service menu (info - menu - mute - power). While setting I accidently pressed INFO button again and it auto changed some G2-Adjustment values. I switched off the TV. From after that TV is not turning on, its on standby mode and when I press power button or service menu button I only can hear the click but again no picture comes and it goes to standby again.


... Samsung Standard (CRT) Televisions

Philips 42pfl5522 LCD TV. Digital channels no longer work, when i select the digital channels with the remote either with the Digital MENU button or the EPG button I just get a small blue cross appearing in a box in the top left of the screen. Using the A/D button or the AV selection button simply takes me to a blue screen. It's the first time the TV has been used for a few months (having been to Australia for a while) but it did work when we got back for about a day. I'm not sure if


... Flat Panel Televisions

Technika lcd40-920 My tv has switched its self off and wont switch back on again although the standby button is still on (was flashing but now on with no flashing) ive tryed turing it on with the remote and using the touch buttons on the side and turning the mains off for 10mins to see if it resets or something but still nothing. Please help. I really dont want to have to buy ANOTHER TV! GRR! Ive done my research and what ive seen is people saying its the board with the hdmi etc and theres no po


Thissounds like a very common issue.If set is hard to turn on (takes several tries)but will eventually turn on hereis what my guess would be.Every set has a standby p ... Flat Panel Televisions

I have the samsung LN52A550. When I turn the tv on a blue screen appears. I tried changing the source with the menu button but does not display anything. The TV is about 2 years old. The sound works. When I try a different input(dvd player) same results(althoug I cannot change ths source because the menu does not display). The dvd is attached via a three cable. The directtv is attached via hdmi cable.


Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and powered up initially. in the warning box it will show the c ... Samsung LN52A550 LCD TV

We bought a Sharp Aquos 40" (LC-40LE83OU) TV about two months ago and are having problems. The TV will not power off and receiving a flashing light - 5 times. We have physically powered off the TV, also tried the press the "-" volume and input button at the same time and then powered off to no avail - the service call advisor told us to try this. Do you know what is wrong? Was a button accidently pressed on our remote control?


... Sharp AQUOS LC-40LE830U 40" LCD LED HDTV

We bought a Sharp Aquos 40" (LC-40LE83OU) TV about two months ago and are having problems. The TV will not power off and receiving a flashing light. We have physically powered off the TV, also tried the press the "-" volume and input button at the same time and then powered off to no avail - the service call advisor told us to try this. Do you know what is wrong? Was a button accidently pressed on our remote control?


... Sharp AQUOS Quattron LC-40LE830U 40 in. Smart HDTV

Samsung 37 TV changes sources at random. Tried clicking source button, it brings up menu half the time, and menu button switches source half the time. Any ideas?


Look for any jammed buttons on remote or on control panel. Try removing the batteries of remote and see. Look for any loose contacts in RC jacks/sockets/Cable or even the power outlet. ... Samsung 37 in. Flat-Panel LCD HDTV

I have a Pioneer PDP-4340 plasma TV. I was watching the football game when I decided to go to the menu button and see if I could adjust the color contrast. Although it tells me I cannot perform that operation (why?) I continued to scroll thru all the categories: e.g., sound, audio, etc., etc. To my knowledge I did not change any settings, just keep pushing the menu button to come in and out of the selections. All of a sudden I lost my picture but the sound still came through. I shut down t


This like your tv mainboard has error, change it with new one, contact service center to do that ... Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1190 seconds