Having problems with your Flat Panel Televisions ?

My JVC model. my JVC TV LT 42 EM 59 will not come on .I get no blinking blue light no power no nothing I get nothing I've tried to reset it in nothing



Answers :

With no power it will not reset---if total dead unit you would have to first follow the power cord into the set to the line fuse it goes almost directly to---check the fuse first and examine the power supply board for damage or puffed up filter caps.


12_20_2012_4_03_56_pm.jpg

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

My JVC model. my JVC TV LT 42 EM 59 will not come on .I get no blinking blue light no power no nothing I get nothing I've tried to reset it in nothing


With no power it will not reset---if total dead unit you would have to first follow the power cord into the set to the line fuse it goes almost directly to---check the fuse first and examine the power supply board for damage or puffed up filter caps. ... Flat Panel Televisions

Mitsubishi WD-73735 will not turn on and there are no lights on front. The power supply was replaced, and is brand new. I fix HDTVs, and have had very little problem resolving other issues with other TVs. This one is strange. Need help, please. When I plug it in, you can hear the PS get power, but nothing turns on. Tried the 'Menu' and 'Input' combination....nothing. Tried plugging it in, with the 'Menu' button pushed...nothing. I can hit the 'Reset' button on the


If you have no lights come on the front of TV, you definitely have a power supply issue. Don't know what previous servicer did, but I would be looking at ALL wires & connectors. ... Mitsubishi WD-73735 Television

Green blinking light, power comes on but no light no fan, nothing else just green blinking light on front, tried system reset and it did not work


Problems with the DM assembly will cause perpetual "boot up" or blinking sequence, but if this is the case the TV never actually turns on. If you are able to turn power on after boot-up (which should only occur at plug in), then suspect lamp or balla ... Mitsubishi WD-57734 57" HDTV

I have a 42 inch plasma tv that does not appear to be getting power. I had an electrical storm this morning and the power went out for a couple of seconds - enough to cause the clocks to need reset. I did not notice anything until I tried to turn it on tonight. I have unplugged and held power button, but nothing. I can hear a cllicking noise from the back when I stand near it. Red light on the front not on. Any suggestions?


The tv power supply board,the board it is shorted and dead.This the board where the tv power a/c cord is plug into it.Must change the tv power supply board,tv should work again.If tv still have the same problems.The main logic tv Tuner signal board a ... Samsung HP-R5072 50 in. Plasma HDTV

I have a Mitsubishi WS-55909 projection TV. There was a power outage and when the power came back on, the TV won.t turn back on again. There is this light (Timer) that keeps on blinking on the front panel of the TV. I tried unplugging the Unit and waited for about 15 to 20 minutes before turning it back on , still won't work. I tried using the original remote for the TV to try to turn the power on, still doesn't work. There is a reset button beside the timer light, and I tried to reset the unit


Unplug,replug the tv back like 24 hrs later.That the whole tv is resetting itself everythings.Tv now should be working again.If still have the same problems,than ur tv DM power supply board is have dying parts,must repair the tv DM power supply board ... Mitsubishi Projection Televisions

I have my 32LG70 LCD tv since 2009 and it has been perfect, but this morning i was watching it and it just shut off by itself. Everything else is still on, tried switching outlets, reset, but theres no lights or anything to indicate its getting power. Typical day nothing out of the ordinary that would cause this. I called LG the tv is out of warranty and its discontinued. I really dont want to pay an arm and a leg for repair id rather get a new one but im open to suggestions. I don't know anythi


Try to pull out some cable connected on it just leave the power cord and cable connection then try to power it on again. ... LG Flat Panel Televisions

When I plug in my JVC LT-24DK3BJ television, the blue power light comes on and remains solid, but there is no picture or sound. I have tried all sorts of things to try and solve the problem, but nothing has any effect whatsoever. Is there a way to reset the tv or anything like that?


... JVC DT-V24L3DU 24 in. LCD TV

Turn power on, power light blinks 3 times and goes back to "standby" mode. tried unplugging for 1 minute to reset, plugged back in and same result. called support line but can not find reciept for purchase date so can not get warranty repair.


Many tvs are having problems with the capaicitors on the power supply. I would remove the back of the set, locate the power supply, and look at the top of the capacitors "barrels", if the top is bulging up slightly, they are bad. Usually 6 of them ... Flat Panel Televisions

I have the WD-65731 DLP HDTV. The tv will not turn on. Initially, it will power up, and you can here the fan running. The green "timer" light will blink for several seconds. Finally the fan will turn off and the blinking timer light will go out. I have tried resetting the TV, as well as unplugging the power cord and all input cords. After waiting 60 seconds, I reconnected all cables and tried again to turn it on, but the result was the same. No other indicator lights are on during ths process


Have you replaced the lamp?? You usually have to replace the lamps around every two to three years. The manufacturer has designed it so you the customer could change it yourself without a technicion. Hope this helps. ... Mitsubishi WD-65731 65" HDTV

I have just re-installed my pdp5071 after it being in storage for a few years.. the unit will not power up . at plug-in several clicks at upper left rear of unit ( click - stand by red light on-off, pause then click blue power light on, click blue power light out, pause click, click ) unit then is dead .. i have tried the unplug reset operation several hundered times same result. i have tried the mechanical power button a few hunderd times - randomely at plug-in i get a single click and red stan


There are two power buttons on this TV. One on the lower left front and one on the right side. make sure they are both on. During storage it may have deactivated both of them. ... Pioneer PDP-5071HD 50 in. Plasma HDTV

Hi, I have Sony Bravia KLV-32S400A Couple of months ago suddenly get switch off after I switch on standby light(Red) gets blink. I unplug the power code and switch on the LCD after 3 hours it works fine. I happens occasionally. Couple of days ago I'm unable to power on the LCD. When I plug the power code I can here a sound like cutout gets on off (tick tick) nothing happens no indicating lights, no display and no sound. Please help me to solve this problem


Dear User,in your case there is a supply fault..capacitor of power board is weak .kindly change the capacitor ..the sign of capacitor faulty is that capacitor is blow up like oil is coming out form upper side..kindly do the need ful.dnt ... Sony Flat Panel Televisions

I have a mitsubishi dlp WD-65733 and it went out on me a week ago. when I power it up i get only the green light above the timer. when i hit the reset button in the front i hear a click in the back and the green timer light starts blinking for about 30 seconds the it powers off. I do not get any lights above the status or lamp. i have replaced the bulb before about 1 1/2 years ago. could this be the bulp again? when i replaced it before i had an orange lamp light but not this time.


Hi,It seems problem in power supply board that got few electrolytic capacitors leaky and causing problem. It does not look like lamp issue.Let me know are you handy with electronics stuff repair and can replace parts in circuit board? ... Flat Panel Televisions

What's your problem? Tv wont turn on the little red light next to the power button is blinking Turn it off two days ago to sleep and in the mornin tryed to turn it on and nothing i try pushing the


What is the model of your tv? ... Flat Panel Televisions

TV turned off by itself one day. I pressed reset, timer light blinked green for a minute, then I pressed power and it sounded like it wanted to boot up, but nothing happened and the status light turn


Two thoughts:First is this is a DLP set and the lamp may have failedSecond is it should have the self check which reads error codes---most of these sets that is the same:" After you turn on the set, and get the regular red bli ... Mitsubishi WD-Y65 65" HDTV

Replaced convergence fuse , resoldered flyback terminals..originally when tv went out it would not come back on..the power green light would blink a couple times then nothing..but finally TV came on..and showed convergence problem...after replacing suggested convergence fuse by tvrepair.com tried powering on the tv and the green power light blinks a couple times and shuts tv down...u can here a click ..but no picture. any suggestions?


Persistence pays off! What you found is very common and yes these sets are not real well made--good for you! ... Projection Televisions

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself. when turn it on again, I can hear the fan is working, the power light is green, but it shuts off after a while.


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended. ... Mitsubishi WD-52631 52" Projection HDTV

My Sharp Aquos turned off by itself and doesn't want to turn on. Both power and OPC lights blink green.I tried to reset my tv by holding power button and also down volume and up channel buttons. I only got the power light on but the screen was still black. I read that screen with letter 'k' should come out, but didn't. How to fix it?


That procedure was for a full reboot, not the case here. The blinking signals a hardware defect - if it's continuous it signals that the power source has been shut down in emergency mode because another part inside the tv has failed and now it acts a ... Sharp AQUOS LC-42D85U 42 in. LCD TV

My LG 52sz8r tv wont turn on. It suddenly stopped working. I presumed the bulb needed replacing as the bulb light was on before it stopped working, but did not come back on. however after replacing the bulb the problem remains. After pressing the power button the red standby light comes on, but when i try to operate the tv the standby light turns green and blinks about every second and nothing happens. I can hear a small click in the unit a few seconds after trying to turn it on. any suggestions


... Flat Panel Televisions

Mitsubishi WD-73638 When I reset the tv I get a green status light. Try to turn on the tv it begins to turn on then shuts down and I get 4 blinking red and 2 blinking yellow on the status light.What is error 42 and what could cause it?


Lamp is gone needs replacement ... Projection Televisions

My toshiba 50hpx95 has a steady blinking red light, it has no pauses or breaks to recite a code, just steady blinking. I had it in the shop and they said the power board needed replaced, so i replaced it and still get the same code. Is there a trap reset, or other mode of reset that i am not finding in the "service" manual, or was the problem misdiagnosed by my repairman. I cant even do a boot via service code thru the remote. is there a way to do a soft boot under low voltage so the chip can gi


This tv have a Tuner signal board it is also dead too,this problems happen sometimes,the power supply board dies,but sometimes the Tuner signal board take power surges from the power supply board itself than kiill the tv Tuner signal board too.Try we ... Toshiba 50HPX95 50 in. Plasma HDTV

Power light is red so I guess it's getting power but when I try to turn it on nothing happens. I know a green light indicates it is on but that is not happening and I also have no remote.


The standby 5vdc power is working , that is why the front LED is on but it may be in the safety shutdown mode due to short circuits or bad 12vdc and 24vdc power supply section, or bad main cntrol baord, shorted circuits in the backlights inverter boa ... Norcent Technologies LT4247 42 in. LCD TV

My Philips 26PFL5302D/37 will being working great then it will go black. For a few minutes it allows you to go to the menu but it will not allow you to turn the channel. Then it eventually just be black, blue power light is still on, and nothing will happen. I trying turning the tv off and unplugging it but I get the same power on but nothing on the screen. I wait half an hour or so and it turns on and works again. What do I do to fix this???


Hi,what makes the TV malfunctioning this way is because the TV is overheating....Overheating might be from capacitors or IC inside the TV set...To fix it, you will need to check the capacitors or IC if the dry joint soldering of th ... Flat Panel Televisions

My Toshiba 37RV530U LCD TV won't boot up. I've tried unplugging and replugging the power cord. All I get on front panel is 3 blinking yellows then a pause then 3 blinking yellows. This continues forever. Pushing the power button on the remote or on the set does nothing


... Toshiba 37RV530U LCD TV

Hi have a jvc pd-42dx6bj when i turn it on i get the green light to say there is power i hear a noise like the snowy picture sound for a second then nothing no picture but light is still on if i use the remote i can change channel and it will make a noise again for second then again nothing any ideas please best regards gordon


... JVC PD-42DX6 42 in. Plasma Television

Not turning on. When trying to turn on, power light blinks green for a second, then blinks red.


... Sony Grand WEGA KDF-55XS955 55" Rear Projection HDTV

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2114 seconds