Having problems with your Flat Panel Televisions ?

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.



Answers :

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

I have A Samsung 52 inch LCD TV model #LN52A580P6FXZA. The relay clicks at A random rate, there is A red light that flashes steady. It will not power up. All my standby voltages coming from the power supply are present as well as the run voltages. Power supply on voltage is present, inverter on voltage is present, occasionally, it will give A loud high pitched squeal. It never comes on. Any help would be appreciated.


... Flat Panel Televisions

I have a Samsung LN46A530 46" LCD TV. Lost my backlight and wondering if the two wire connectors feeding the R and L inverters is where I would meter for power, and if not what are these for ? Or is it the ribbon cable on the top left (it's pin ids are 1. 12v_cold, 2.FB, 3.FB, 4.GND, 5.GND, 6.LD, 7.LD). Would this TV use 12 V to power the inverters ??. The inverter enable is on (5V), so I assume it is either the pwr supply or the master inverter.


... Flat Panel Televisions

I have a Samsung lcd-led TV Mod UN32C4000PD Ver #CN02 that has 6 blinks when you turn it on. You can here the samsung sound when you push the power but no picture or sound. I put a high power light to the screen but no picture. Also I ck the power supply and i have all voltages. Thank You Pat


This is a classic "Hic-upping" switchmode power supply problem. The protection circuitry inside the SMPSU, has sensed a severe potential problem, and is attempting the shutting of the set, down to avoid a fire, explosion, or both. This s ... Flat Panel Televisions

I have anew Sony 40 inch EX 520 series Led warranty not valid in India since purchased in Bangkok. The power standby light goes of very often and the Tv goes dead. If I switch off the power supply for couple of minutes and switch it on again the stand by light comes back on and TV functions normally. The TV is also very sensitive to voltage fluctuations and on Inverter power supply. Please let me know what could be wrong and how to solve this problem. Thanks


... Flat Panel Televisions

I have a Sony Model# PFM-42B2, that go's into saftey shutdown mode and give's error code "blinking standby led" of 6, all fans start up and voltages for the power supply board, Vs, 82.5v @ cn23 pins 8,9,10 and cn33 pins 7,8,9. Va, 60v cn42 pin 1, cn52 pin 1. Vcc 5.1 @ cn6 pin6. Vpr2 3.3v in standby at pin1. I have also checked the power supply control signals to logic cn7, VCEGO-8, PFCGO - 10, VSAGO - 6, and they show 3.1v, I have the service manual and I have training in electronics, I needed t


Since you already have the service manual, did you check whats the self-test diagnosis for this set? I do not have one for this model so if you can upload it to a file sharing site, I can dowload it and break it down for you. ... Sony PFM-42B2 42 in. Plasma HDTV

DP46849 Sanyo. I have checked all of fixya for solutions. I hane no sound or screen but have a green light when turned on. It will flash as if it is in protect mode. I have checked voltage and there seems to be 5v, 12v and 15v as indicated on power supply. I cannot find a 24v to read from but I did pull the master inverter to see if I had sound. Still the green light flashes and no sound. I suspect power supply only because when it is turned off I hear a high pitched whistle that slowly goes on


Hi,Power supply board seems defective and causing problem. Please replace power supply board to solve tv issue, required board is available in ... Flat Panel Televisions

I purchased a power supply from a well known distributor online and it is for Polaroid FLM-373b lcd tv. part # MLT070AX- and possible <<DOA>> If it is pluged in and power is @ the board should I have my supply voltages ALL present @ the output feed connectors all I have is standby 5v ?? no 12v no 24v and tv still wont turn on ..fuses all good..


Yes , the SMPS unit will output the 5-Volt which is the feed to the main CPU- the processor. Now trace the +5 to the processor and check the oscillations on the processor. Only if the processor works and outputs to feedback ... Flat Panel Televisions

No Vs Voltage (200-210) out of a BN44-175A Samsung Power supply


If no voltage out either a short on the line pulling it down or its at the source--usually one or the other. ... Toshiba Satellite Flat Panel Televisions

My samsung tv replace the power supply board. got sound no pictuer replace the backlight inverter stell no picture


You have to check whether the back-light inverter gets its proper voltages to function. There as many voltages that controls the back-light inverter. Check these is a skilled work. Contact any experienced service technician. If you are not ... Samsung LN40A650A LCD TV

Replace the power supply and the backlight inverter to my samsung has sound but no pictuer can u help


Check whether CCFL lamps are good or not. Check whether the newly replaced back-light inverter functions well. ... Samsung LN-T4665F 46 in. LCD Television

RCA 32LA30RQ power light red at plugin , No function after that, dead, no key function. all supply voltages 2 volts under normal. Uses IPB733 inverter supply board RE46DZ1202. A schmatic would be a great help! Been a master bench tech for 30 years ,Still building my data base of new Bad designs.. Never ending fail by design.


... Flat Panel Televisions

I have a samsung LNT4071FX/AA.2 wks ago had the power supply replaced by samsung due to a clicking noise when i turned it on. Now the screen flickering for like 1-2 mins every time I turn it . would this be inverter issue or the lcd itself. Please help!!AAAP


... Flat Panel Televisions

Samsung hlt5676sx/xaa on - off cycling changed ballast,color wheel & power supply problem still present


... Samsung Flat Panel Televisions

Black screen and have sound vx42lhdtv10a(vizio 42 2008)power supply is ok(12v,24v,5v) main board have 4v and all fuses is good . my question is? how can i test my inverter board output voltage?how can


... Vizio Flat Panel Televisions

Samsung LNT4661FX/XAA. The screen appears over bright and the picture is washed out. Adjusting Brightness/Contrast/Backlight has no real effect. The T-CON and main power supply boards have been changed. Next on the list are the inverter boards - are these the most likely point of failure?


... Samsung Flat Panel Televisions

Pn63c8000 samsung loud pop then no picture. Replaced power supply board. Now I have a little led pilot light lit and very slowly flashing on the logic board.When I turn it off I get a small vertical light flash momentary at the side edge of the screen. I inspected the screen and see no cracks.


Replacing main power supply to Plasma displays is not an easy job as you thinks. There are so many adjustments should be done after replacement. If you wish to get more details about these, ... Samsung 63 PN63C8000 3D Plasma TV

I have a Samsung HL56A65OC1FXZA TV The socket where the lamp plugs in melted so I assume I need the hole Power Supply with fan and socket assembly plus a bulb! Can you give me the part number for this assembly and where I can purchase it! Thanks, Marty


... Samsung Flat Panel Televisions

Tv won't turn on. replaced bad caps and after some testing it turned out that the power supply board wasn't giving the supposed voltages.


This problem is not easily to be solved.Tries to changes all the capacitors components even if u think is good around the bad capacitors surrounding area.After that,if u still have the same problems.This problem could be any high voltage components p ... Insignia NS-LTDVD19-09 LCD TV

Need schematic for Samsung PSPF651B01A BOARD yhay is in my Dell W4201C. Need to know what voltages to look for, and where. Will not start up (no Logo Screen when I turn it on). Other site suggest to change out power supply electrolytic capicators


... Dell W4201C 42 in. Plasma HDTV

Power supply on a samsung has no va and vs voltages pspf321501c


... Samsung Flat Panel Televisions

Samsung TV Model LA40A650A1M back light intermittently strobeing and sometimes cuts out completely, powering TV off via remote and back on temporarily resolves issue, but returns at various times, have removed power supply board to check capacitors - look OK none appear to be leaking. Power supply board details Hansol LCD, Rev 1.3, Manf date 11 July 08, Model SIP 408A BN44-001947A I note in some posts for similar Samsung P/S boards it has been suggested replacing specific capacitors - any su


You can't see if a cap is good or bad jus looking at them they have to be measured>They loose their capacitance because they dry overtime.I do sugest that you replace you power supply module or replace all caps.Possibily you may have a broken ... Samsung Flat Panel Televisions

Sylvania ld320ss8a power up problem.It goes on stand by after 6 or 7 blinks of the green power on light and back to red 5-6 seconds There is no sign of bad capacitors on the inverter CBA.after unplugging power from inverter CBA to the power supply CBA what should the power read under normal conditions coming out of the inverter? I am getting a pulsating reading of 0-117 volts about every 2 seconds.Any advice as to the problem??


... Sylvania LC370SL8 37 in. LCD Television

How to troubleshoot Samsung plasma tv power supply


If relays are clicking, the problem could also be the diode connected to the relay or its own power supply. Check whether the relay is getting power enough to remain activated. This chattering can also be caused due to relays becoming weak or by ... Samsung HP-T4254 42 in. Plasma Television

Sanyo DP42848 back light comes on momentarily then shuts off. I've changed power supply and slave inverter. Master inverter not available right now. Replaced power supply and both master and slave


... Sanyo Flat Panel Televisions

Sanyo DP50747-00 (Samsung Power Board LJ44-00132A) wont turn on ..


While I am afraid i can not say what is wrong with the board if only because I do not know with certainty I hope I can offer two possible solutions to anyone having a similar problem:\015\012 \015\012Here is an option to buy an alrea ... Projection Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1763 seconds