Having problems with your Flat Panel Televisions ?

Hi i have a goodmans lcd tv the power supply is a mlt666 rev 2.8 and the tv comes on ok for about 2 mins then the backlight keeps flashing and the power supply then starts clicking and tv keeps doing that to u turn it of thanks for any help



Answers :

I would have the power supply filter capacitors checked, especially the 24vdc circuit

Repair Help & Product Troubleshooting for Flat Panel Televisions
You need a second opinion or clarification ? ask it in the comment box OR you can Ask Your Own Question

Tips for a great answer:

  • Please provide as much detail as possible as this will allow our members to better understand and respond to your Comment
  • If you need clarification, ask it in the comment box
  • It's 100% free, no registration required

Suggested Questions/Answers :

It is recommended you read all this kind of situations

Hi i have a goodmans lcd tv the power supply is a mlt666 rev 2.8 and the tv comes on ok for about 2 mins then the backlight keeps flashing and the power supply then starts clicking and tv keeps doing that to u turn it of thanks for any help


I would have the power supply filter capacitors checked, especially the 24vdc circuit ... Flat Panel Televisions

I have a Panasonic TH-42PV 500A plasma the when you turn on there is a click the fans turn on then nothing for a few seconds and the the relay on the power supply clicks and the the power red led light flashes 7 times stops and then 7 times. What error is this??? Please help


... Flat Panel Televisions

Dead RCA TV model # P60752EB. My TV would make a click sound and the picture would flash like it was going out about once a week. It went off for good and now won't turn on at all. Someone suggested a power supply problem. I'm sitting here staring at the power supply board :( please help! I love this TV!


The PS suggestion is likely on the money.\012You have a couple of choices-\012- Buy a new board from RCA\012- Buy a used or repaired board; one source is:\012 Jimmy's Parts ... RCA Projection Televisions

Philips 42model num:pf5331/10, plasma tv, wide screen flat tv, the red light keeps blinking, one long then two short blinks, took back off the tv, pluged in power leed, power goes to power board, then clicks twice and will not start, yes i think its the power board, looked at all capacitors they look good, i have had the tv since 2006 if you can help me, my email is [email protected] thanks terry edwards


Hi raftxxxPlease everyone that comes across my info take a few seconds of your time to rate my solution which you can select at the bottom of my answer Was this solution helpful? YES or NO :)... As i have taken time to answer your questio ... Philips 42PF5421 42 in. LCD Television

I have a samsung LNT4071FX/AA.2 wks ago had the power supply replaced by samsung due to a clicking noise when i turned it on. Now the screen flickering for like 1-2 mins every time I turn it . would this be inverter issue or the lcd itself. Please help!!AAAP


... Flat Panel Televisions

I have an insignia 50" plasma ive had for about 2 yrs. There was a solar storm which caused the directv boxes to go out and the tv went out as well ans since then the tv won't power up. In the back of the tv we hear it click 3 times then it turns off by itself and it repeats the on/off process but nothing shows on the screen. I ordered and replaced the power supply board and its doing the same thing with the new board. Please help!


... Insignia NS-P501Q-10A 50 in. HD-Ready Plasma TV

My Sony Bravia NX711 LED 3D tv keeps shutting off and resetting itself Turns back on for 4-5 seconds and just keeps repeating the same thing over and over unless I power the tv off. Just randomly happened while watching television.. After shutting off I kept hearing a clicking noise and the red indicator light would go on and off so I unplugged it. Need help please tv was purchase less than a year ago


... Sony Flat Panel Televisions

Got an TFT-LCD television Haier L42T1 .. when i want to turn it on, it won't neither by remot. Power on led .. keep flashing .. i open it and no part are deffected. Would check power supply card. And woul get help, pls.


... Flat Panel Televisions

My LCD TV KLV-32S200A never start, if turn on to remot or power sw then green led on after, 3 to 5 sec Red led Blinking and some time Power supply Relay on off (like Blinking) Pleas help me, thanks


... Sony BRAVIA Flat Panel Televisions

I have a Sharp Aquos TV that started to turn on but shut off automatically. Tried it several times and it kept doing the same thing. Now the tv won't even turn on and the power light on the tv keeps blinking on and off. Please help.


It sounds like a bad capacitor. If you are handy, you can search on Youtube on how to replace them on your model. If not, have a proffesional look at it. The individual parts should be inexpensive. The service charge varies. Good luck! ... Sharp Flat Panel Televisions

I have 50 inches plasma Hitachi TV (ALiS 1080HD). As the TV was on, the screen stopped showing (no picture) and no sound could be listened as well, without any reason. The power light started flashing (on and off) so I turned the TV off from the power supply (as the remote control was not responding). Few seconds later when I turned the power supply back on for a moment I heard a sound (making me believe that the problem was fixed) but once again the power light started flashing with the same en


... Flat Panel Televisions

My toshiba 42hl196 popped when I turned it on last month. 3 blinking lights. Brought to tv repair - they say it was the power supply and tried replacing the ICs with a kit - did not work. Said coul


... Toshiba 42HL196 42 in. LCD HDTV

Tv just keeps clicking will not turn on i believe i need power supply


Yes your'e right buy that power supply ... LG 50PG30 Plasma HDTV

My tv just stopped working. When i felt the power supply box it was very hot. I unplugged the tv and after half an hour turned it back on when the power supply cooled down. The tv worked again but only for about half an hour and turned off again. The standby lights are on but i cannot get the tv to go on. What could this ba...maybe the power supply? Please help. Thank you


Hello,It's the problem of overheating in the power supply board of the Television.on the power supply board of the Television there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the Tel ... Flat Panel Televisions

We own a Sony FWD-50PX2 television. A few weeks ago it would not turn on. The power is going to the television. When you try to turn the tv on you can hear it pop and the red light showing it is off will flip to green and then turn back to red. We would like to just repair the TV as it is a very nice television set. We thought possible power supply, but it is trying to turn on. Any help you can give to help correct the problem would be great.


... Sony FWD50PX2/S 50 in. Plasma Television

50pfp5332d got this tv not working. found no power when conected and decided to remove back cover. found blown PCB fuse and replaced it,turn the tv on and the picture came on for 10 seconds and when out but tv was still on since the logic board led was on,also noticed led on PCB started blinking. pull power cord off and then plug back in turn power button on and got picture for 10 second PCB relay clicked picture died and led on PCB started blinking again. what do you think?bad PCB or ba


Hello\015\012The power regulator PCB has some fault it it. It does not outs proper regulated voltages needed to the other PCBs in your TV. Normally Plasma TV power regulator PCBs are very difficult to repair, and PCB as whole should be replac ... Philips 50PFP5332D 50 in. Plasma Television

Samsung PN50B450B1DXZA will not power up. When I try to power it on, it makes a clicking sound and then nothing for 10-15 seconds and another clicking sound. The Red LED on the front flashes when it clicks but nothing ever appears on the screen. I removed the back of the TV and inspected Capacitors but do not see any that look to be bulging. When I try to power it on with the back off, I see a green light quickly flash on a logic board just below the power supply board. Are these clues helpful


... Samsung HP-R4262 42 in. Plasma Television

Hi, my LG PG6000 plasma tv is broken. When I turn on the tv it starts, then shuts off, then it starts again and keeps on doing this a couple of times. Finally it turns on (the power LED is on) but it has no picture or sound. Is it the power board? A couldnt find any broke fuses or capacitors. Best regards Mathias


... Flat Panel Televisions

I have a Olevia lt37hvs, When i plug it in the blue(olevia)light comes on then goes off and the screen will be blue for 5-6 second then go black for 1-2 seconds then screen goes blue again and it just keeps repeating this process. i hear the big transformer on the power supply clicking like its being overloaded then the screen goes black. When i disconnect the main board from the power supply the clicking and flashing stop. Any ideas?


Tried to connect again the supply for main board and disconnect the supply for the inverter board of back light. and turn on the tv, if the indicator stay the inventer board was the cause of voltage drop at the power supply board. ... Olevia LT37HVS 37 in. LCD HDTV

My Samsung flat screen tv won't turn on and it keeps clicking - it keeps trying to turn on but then starts clicking again.


There's a couple transistors on the Power Supply board that are probably bad. On mine, the solder joint was bad on the bottom side of the board that pointed me at those transistors in particular. Part number is FQPF9N50C. Also, you could get a ... Samsung HP-T4254 42 in. Plasma Television

Power LED turns green, there is a clicking sound, the LED turns red and then turns off and will not power up again unless disconnected from the power supply


It sounds like the power supply in the tv has failed. Most of the time there are some capacitors on the circuit board that were rated too low and basically blow up. You can physically see that they are "puffed up" or "domed" on top. There are two way ... Flat Panel Televisions

Pdp-428xg the standby red led comes on... but cannot start by pushing the power switch on both the tv & the remote.. Just no respond. The LED on the Power supply PCB is on.. I can hear the relay click when I plug in the power cable... Is it a Power supply failure??? the PSU number is 1H403W. Many thanks


... Flat Panel Televisions

My Samsung Plasma 42 in. TV turns itself off after a couple of minutes of being on and then makes a clicking sound like its trying to turn on again but it doesn't turn back on. It just makes this clicking sound. If I unplug it, sometimes it will function normally again and sometimes the same problem occurs. We thought it might be the power strip so we plugged it into a different outlet. At first, this seemed to work. Then, the cable box and the sound system started turning off spontaneously


Try checking the standby mode. . . ... Flat Panel Televisions

Vpw 425 viewsonic, have owned this Plasma, for several years, has always operated fine. Today it won't turn on. Main power switch is on. Standby switch is red. When I push the standby power button, it changes from red to green, I hear a click, then within 2-3 seconds the standby light turns back to red. I removed the back panel and tried to start again, after several tries there is a red indicator light (inside the panel) labeled "main power" that comes on and stays on.


... ViewSonic VPW425 42 in. Plasma HDTV

Hi, can you help me with this TV please. Hi, I have a Olevia 232-T11 LCD TV. First my TV wouldn't turn and the blue light just stayed on. I replaced the power supply board and now my TV turns on and the screen lights up but I get no picture or sound. The slave backlight inverter board has a blue light when you turn the TV on but goes away shortly after. The screen stays on but I have no sound or can't control the channel, volume or source button. Please help.


If the tv is not coming on but there is no picture or sound then it is a 100% guarantee that its a problem with the audio/video main board of the tv. I am sure that replacing the same would resolve the problem. Please get me the part number that is p ... Flat Panel Televisions

A detailed question is important to get you a relevant answers

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
all rights reserved to the respective owners || fullblownbass.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3920 seconds